ComfyUI Workflow for single image generation

• Needed Custom Node: https://github.com/Rvage0815/ComfyUI-Rvaged.git

• I've updated the node today so make sure you have the latest version.

• Links / Resources

• How to install custom nodes by hand

Everything you need is linked in Links / Resources. e.g.

• SUPIR Checkpoint

• SDXL All4One ControlNet

• SDXL Tile ControlNet

• SD3 ControlNet

• FLUX Links

• Upscaler Links

• ...

Changes:

v2.6

• some small optimizations

  • they way the image flows -> 1st sampler or upscale image groups -> remove text -> 2nd sampler (to fix visible areas)

  • added a prompt node in the detailer groups (collapse to edit the prompt, ran a bit out of space)

    • requires the installation of this node: https://github.com/abyz22/image_control

  • in the 2nd sampler its possible to diable the upscale model and/or the downscale node.

v2.5

• IMPORTANT: Update the Rvaged Node

  • i've added a guider switch to switch between the basic guider (flux no neg cond) and the cfg guider (all other).

• reworked some groups

• reordered the model groups, loras, model charger, sampler settings

• using the custom sampler as standard now

• added a lora stack for the upscaler checkpoint

• added bookmark for faster jumping around in the workflow (0-9)

  • you have to disable the image chooser shortcuts in the comfyui settings (comfyui panel -> the gear top right)

• added some notes here and there

• added the fashion wildcards to the archiv. the others can be found here:

  • -> luxy lingery

  • -> 200wildcards

v2.0

• added flux support

  • Check how to install here

  • Update ComfyUI

• added face swap

Features:

• Every Group can be disabled,

• i've added a new version of Remove Text to remove watermarks in each corner.

  • the size of the masks can be changed.

  • each corner can be switched on/off

• you can use 2 checkpoints (one for the initial render and one for the upscale)

  • current preset is: FLUX (Init Render) and dreamshaperXL lightning (upscale)

• it also allows to upscale already existing images (Load Image Node or Load Images from Folder)

  • disable both Sampler Groups and the checkpoint loader that you don't want to use.

With the new node set "Crea-Prompt" this workflow is heavily using random prompts. this can be an issue if you want to change things and restart the generation, but the last prompt is shown in the ShowText Node and also in the console. i've left a description of how to re-generate the last image in the workflow.

it has 3 upscalers:

• 1 after the first sampler that is mainly there to improve the initial render.

• 2 is a combination of supir (can be turned off) and tiled diffusion with a tile controlnet.

• 3 is basicly a copy of 2 without supir. (can be turned off)

• i've added 3 detailers, they do what you set them up for. if you put a hand model its a hand detailer. default setup is face, eye, hand.

there are some filters, LUTs and 2 Watermark Groups that i've already used in the magic moments workflow.

it saves the generation data into the image file.

• there are 2 groups to save the image

  • 1. WAS Node Save Image

    • if you don't want to share the gen-data when uploaing images.

  • 2. Save Image with Gen-Data

    • its preset NOT to embed the workflow because i don't want to share it everytime when i upload an image but it is saved as json file using the same name as the image file.