A massive sheet of aluminum, very thin, wide, and long, is being compressed between two large industrial metal rollers. The rollers apply intense pressure, slightly deforming the sheet to make it perfectly flat. The setting is a modern metal processing factory, with light reflections on the shiny aluminum and detailed mechanical features on the rollers. The scene is shown from a slightly angled side perspective, with industrial lighting.
050
FLUX
A massive sheet of aluminum, very thin, wide, and long, is being compressed between two large industrial metal rollers. The rollers apply intense pressure, slightly deforming the sheet to make it perfectly flat. The setting is a modern metal processing factory, with light reflections on the shiny aluminum and detailed mechanical features on the rollers. The scene is shown from a slightly angled side perspective, with industrial lighting.
027
FLUX
Specialized Bitumen Refining Plant Governorate: Anbar / Hit District Production Capacity: ( ) Tons/Day The city of Hit in the Anbar Governorate is considered one of the most famous areas in the world for its natural "bitumen springs," which have been used for thousands of years (dating back to the Babylonian and Assyrian eras). However, processing this bitumen for modern use requires technical steps to transform it from a raw material into a viable product for construction or industrial applications. Bitumen emerges from these springs as a highly viscous liquid mixed with sulfurous water, salts, and mud impurities. This "Natural Asphalt" differs from petroleum bitumen produced in refineries, and it can also appear in the form of rocky or spongy blocks mixed with mud. To obtain industrially usable products from this bitumen, specifically for: 1. Waterproofing (Felt/Membranes): Considered one of the best coating materials for building foundations to prevent moisture leakage due to its high resistance to hydrolysis. 2. Road Paving: Mixed with gravel and sand to produce asphalt concrete. It is characterized by exceptionally high cohesive strength compared to industrial bitumen. The natural bitumen from these springs must undergo several fundamental processing stages to become industrially viable: 1. Collection and Sedimentation: Bitumen is collected from the springs or quarry sites and left in designated basins to allow the sulfurous water to naturally separate (due to density differences). 2. Primary Heating: The raw bitumen is placed in large boilers to: a. Evaporate the remaining water. b. Reduce viscosity for easier handling. 3. Filtration and Purification: The heated bitumen is screened to remove solid impurities such as gravel, dirt, and suspended organic matter. 4. Secondary Heating and Cooking: The temperature of the bitumen is raised, improving agents are added, and it is prepared for the vacuum distillation process. 5. Vacuum Distillation: The distillation process is conducted under low pressure (vacuum pressure), which allows for: a. The separation of light oils and volatile substances at lower temperatures. b. The production of highly pure "Hard Asphalt," which is highly demanded in the construction industry. ________________________________________ Plant Components and Operational Stages The specialized bitumen plant for processing raw natural bitumen (in both liquid and solid states) consists of a range of specialized equipment designed according to the latest international standards. This equipment aligns with the technical and engineering requirements for bitumen products, complies with Iraqi standard specifications, and adheres to environmental considerations in the Anbar Governorate. 1. Extraction Stage The raw material (solid or liquid) is extracted from quarries designated by the Geological Survey Authority using specialized mechanical equipment. It is stored in stocks or special basins for solid materials, then transported to the refinery site using specialized transport vehicles of various capacities. 2. Storage Stage The raw materials are stored in designated yards to ensure a sufficient inventory for continuous, uninterrupted production for no less than 7 working days. 3. Raw Material Preparation and Primary Heating Stage Raw materials are fed into the plant via hydraulic lifts. This stage includes: • 3-1: Crushing and Digestion: Solid raw materials from the quarries are broken down and digested using a digester (SH-01) equipped with double blades driven by hydraulic motors (22.5 kW capacity). The digester is 5 meters long and 1.80 meters in diameter, made of carbon steel, with Stainless Steel 304 blades. It includes a Stainless Steel piston driven by a 7.5 kW electric motor. • 3-2: Primary Heating: This melts the bitumen and improves pumpability through pipes and pumps. • 3-3: Efficiency Enhancement: To increase melting efficiency, Gas Oil is added to the primary heating basin at a ratio of 1:5 per ton of solid raw material entering the basin (this ratio decreases when using liquid raw bitumen). o 3-2-1: Primary Melting Basin (TK-01): Raw material is heated in a concrete tank (25m L x 5m W x 3m H) with a maximum storage capacity of 300 tons. Heating pipes circulate thermal fluid (oil) at 125°C, with a retention time of 4-6 hours. The tank is internally lined with 6-8 mm carbon steel plates to protect the heating pipes from corrosion. It contains 8 Stainless Steel 304 mixers (MX-01 A/B/C/D/E/F) driven by 7.5 kW electric motors (50 RPM) and gearboxes (1:60 ratio) to mix the material, increase heating efficiency, reduce retention time, and circulate the melted bitumen to eliminate dissolved water, resulting in a homogeneous melt. Covered with a carbon steel roof with service hatches, it connects to an air duct (30x60 cm) linked to 2 air blowers (AB-01A/B) (one operating, one standby) at 22.5 kW / 1500 RPM. These extract water vapor and sulfur fumes, sending them to a scrubber before atmospheric release and water recycling. o 3-2-2: Primary Collection Tank (V-01): A carbon steel tank (12-14 mm thick) with a maximum capacity of 125 tons (10m L x 5m W x 3m H). It connects directly to the primary tank (TK-01) via channels and movable gates to receive only liquid raw material. It contains thermal oil pipes to maintain the liquid raw material at 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum outer cover. Impurities larger than 35 mm are removed and collected in a waste tank. o 3-2-3: Screw Conveyors (SC-01 A/B): Carbon steel screw conveyors with a double-jacketed outer cover filled with thermal oil to maintain the 140°C temperature. Driven by 22.5 kW electric motors (3000 RPM) with 1:40 gearboxes, they transport the liquid raw material to the preliminary filtration unit. 4. Purification Unit Removes suspended impurities from the liquid raw material in two stages: • 4-1: Preliminary Purification Tank (V-02): A carbon steel tank (12-14 mm thick, 125-ton capacity, 5m L x 10m W x 3m H). Receives liquid raw material from the primary collection tank. Contains thermal oil pipes to maintain 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Impurities larger than 15 mm are removed to a waste tank. Material is pumped to the final filtration stage via gear pumps (GP-01 A/B) (one operating, one standby) at 22.5 kW / 1000 RPM. • 4-2: Final Filtration Unit (FT-01): Removes remaining impurities by passing liquids through box filters arranged in 2 trains (8 per train). They feature a two-layer Stainless Steel filter mesh (specified microns) wrapped around square boxes. Liquid enters from the outside, and pure liquid is collected from the inside via a pipe network connected to a manifold. This is driven by two vacuum pumps (VP-01A/B) connected to the raw material tanks. 5. Raw Material Tanks (V-03 A-J) Ten carbon steel tanks (2.5m diameter, 9m length, 14 mm thickness, 45-ton max capacity) equipped with thermal oil heating coils. They receive, store, and prepare the purified raw material for the subsequent cooking reaction. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Connected by a pipe/valve network, the material is pumped via two centrifugal pumps (P-01 A/B) at 22.5 kW / 3000 RPM to the reactor unit. The tanks connect to a pipe network driven by vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM, pushing heating gases and vapors to the gas washing tank (V-14). 6. Reactor (Cooking) Unit (V-04 A/B) Consists of three reactors (55 tons each) that prepare the raw material for vacuum distillation and extract light naphtha compounds. • 6-1: Cooking Process: o 6-1-1: Catalyst System: Consists of two tanks. One prepares the catalyst mixture (1.5m dia, 4m H, 8mm carbon steel) with a mixer (MX-03) driven by a hydromotor and 1:40 gearbox. The second stores Gas Oil added to the preparation unit (1.5m dia, 1m H, 5mm carbon steel) with a 0.5 HP centrifugal pump. o 6-1-2: Reaction Tanks (V-04/05/06A): Three carbon steel tanks (2.8m dia, 9m L, 14mm thick, 55-ton max). Each has 2 Stainless Steel mixers (MX-02 A/B/C/D/E/F) driven by a 7.5 kW motor (1500 RPM) with a 1:40 gearbox. Contains an internal heating system powered by a Gas Oil burner to raise the temperature to 180°C. Catalyst is injected via dosing pumps (DP-01A/B) to increase naphtha extraction efficiency. Material is circulated during cooking by two centrifugal pumps per reactor (P-04A/B/C/D/E/F) (one active, one standby) to reduce retention time to 3-4 hours. After cooking, material is moved to the attached tank (V-04/05/06B) for storage before distillation. Fully insulated. o 6-1-3: Cooked Material Tank (V-04/05/06B): Carbon steel tank (2.8m dia, 9m L, 14mm thick) with thermal oil pipes to maintain 190-200°C. Fully insulated. Material is pumped to the vacuum distillation tower via centrifugal pumps (P-05A/B) (one active, one standby) at 22.5 kW / 3000 RPM. 7. Raw Naphtha Storage Unit Collects and condenses naphtha extracted during cooking. • 7-1-1: Raw Naphtha Tanks (V-07A/B/C): Three vertical Stainless Steel 304 tanks (1.5m dia, 5m H) connected to three heat exchangers and two pump pairs. Equipped internally with water spray nozzles on a ring pipe to wash non-condensable gases. • 7-1-2: Heat Exchangers (HE-01A/B/C): Condense naphtha vapors from 140°C down to 40°C using water from the cooling tower. Connected in series. Shell & Tube type, carbon steel (510 mm dia, 6m L) with 70 tubes (0.75-inch dia) in two rows of 35. Includes internal baffles for efficiency. • 7-1-3: Supporting Pumps: Vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM draw naphtha vapors from reactors to the heat exchangers, pushing non-condensable gases to the scrubber (V-14). Centrifugal pumps (P-02A/B) at 11.5 kW / 1500 RPM transport liquid raw naphtha to the Bleaching Unit. 8. Vacuum Distillation Unit The core of the plant, separating remaining light compounds and producing hard asphalt. • 8-1-1: Vacuum Distillation Tower: A vertical tower (~16m total height, 14mm carbon steel). Bottom section (Reboiler) is 3.5m dia x 1.2m H; top section is 1.5m dia x 12m H. Fully insulated. Fed with cooked material at 190-200°C via pumps (P-05A/B). To start extraction (remaining naphtha, Gas Oil, diesel), temperature is raised to 240-250°C using Heating Coil 1 via pumps (P-08A/B) at 55 kW / 3000 RPM, with continuous circulation via pumps (P-07A/B). Vacuum pumps (VP-03A/B) maintain 0.3-0.5 mbar pressure. Light compounds are extracted, condensed (HE-02A/B/C), and stored (V-08/09/10 A/B) over 2.5-3 hours. Afterward, material is heated via Heating Coil 2 to 320-340°C to finalize extraction and produce hard bitumen. Product is extracted via pumps (P-07A/B) at ~320°C, cooled via cooling tower coils, and sent to final tanks (V-18A/B/C). Batch processing takes 6-7 hours daily; continuous operation is possible. • 8-1-2: Supporting Pumps: Vacuum pumps (VP-03A/B) at 5.5 kW / 3000 RPM draw light vapors for condensation. Circulation centrifugal pumps (P-08A/B) at 55 kW move hot material to heating coils; (P-07A/B) circulate material and pump final bitumen product. • 8-1-3: Heating Coils 1 & 2: Carbon steel 4-inch diameter coils heated externally by a Gas Oil burner. Connected in series to heat liquid bitumen in two stages to prevent degradation. • 8-2: Heat Exchangers (HE-02A/B/C): Condense light compound vapors from 240°C to 40°C. Shell & Tube type, carbon steel (600 mm dia, 6m L) with 80 tubes (1-inch dia) in two rows of 40, equipped with baffles. • 8-3: Light Compound Tanks (V-08A/B, V-09A/B, V-10A/B): Six horizontal carbon steel tanks (1.5m dia, 4.5m L, 14mm thick). Receive condensates, linked to heat exchangers and vacuum pumps. Liquids are pumped to the Bleaching Unit via centrifugal pumps (P-06A/B) at 7.5 kW / 1500 RPM. 9. Bleaching Unit Improves the specifications of raw light compounds for local use and marketing. • 9-1: Collection Tank (V-11): Horizontal carbon steel tank (1m dia, 2.5m L, 14mm thick) placed above the system to store and distribute light compounds to the bleaching columns. • 9-2: Bleaching Columns (V-12A/B/C): Three vertical carbon steel vessels (1m dia, 4.5m H, 14mm thick). Contain a 15 cm catalyst layer on trays to bleach raw liquids into high-quality compounds, collected in a bottom horizontal tank. The catalyst is a calcined mixture of Bentonite and Zinc Oxide granules (2-3 mm) homogenized in water, which can be reactivated with steam and 5% HCl. • 9-3: Supporting Pumps: Vacuum pumps (VP-04A/B) at 5.5 kW extract vapors to the scrubber. Centrifugal pumps (P-09A/B) at 7.5 kW push bleached liquids to final tanks. 10. Production Tanks (V-13 A-F & V-18 A-C) • Light Products: Six horizontal carbon steel tanks (2.8m dia, 9m L, 55-ton capacity). V-13A/B for light naphtha, V-13C/D for Gas Oil, V-13E/F for diesel. • Asphalt: Three vertical carbon steel tanks (V-18A/B/C) (5m dia, 9m H). Equipped with thermal oil heating coils to keep asphalt liquid. Fully insulated (90 kg/m³ glass wool, 1.8mm aluminum cover). 11. Supporting Systems • 11-1: Gas Washing (Scrubber) System: Treats non-condensable gases before atmospheric release. Contains V-14 washing tank (1m dia, 2.8m L), a 500mm Flare stack with 3 ignitors, and a 1m x 1m LPG tank (V-15) for ignition. • 11-2: Cooling Tower: Provides cooling water for heat exchangers. Galvanized pressed steel basin (16m L x 2.4m W x 2.8m H), FRP casing, top fans, water distributors, and fill media. Includes Accumulator tank V-20 (1.5m dia, 2m L) and 11 kW pushing pumps (P-14A/B). • 11-3: Thermal Oil Boilers: Includes oil tank, heating boiler, oil pumps, and heating accelerators. • 11-4: Distillation Tower Raw Boilers • 11-5: Power Generation System • 11-6: Production Laboratory • 11-7: Control and Operation Room • 11-8: Catalyst System: Contains a vertical diesel tank (1m dia, 1.5m H) with a 1 kW centrifugal pump (P-11). Two vertical carbon steel tanks (V-17A/B, 1.5m dia, 4.5m H) with an MX-03 hydromotor mixer (7.5 kW, 30 RPM). V-17A is for preparation, V-17B pumps catalyst to the reactor. ________________________________________ Catalyst Chemical Components & Formulations 1. Alumina (Al2O3): Enhances the cracking of chemical bonds in heavy bitumen chains and increases Gas Oil extraction yield. 2. Manganese Dioxide (MnO2): Accelerates the reaction, reduces reaction time, and acts as a gasoline improver. 3. Silicon Dioxide (SiO2): Increases acceleration and reduces reaction time. 4. Iron Oxides (Fe2O): Accelerates the reaction, prevents pipe corrosion, and stops sulfur and wax from sticking to pipes and pumps. Weight Ratios (WT/WT) to Produce One Barrel (200 Liters) of Catalyst: 1. Alumina: Varies by feed: 2-2.5% for Bitumen / 4-5% for Vacuum Residue (VR) / 2-2.5% for Heavy Fuel Oil (HFO). To increase Gas Oil/Diesel (Light fuel) yield, Alumina can be added up to a maximum of 10%. 2. Manganese Dioxide: 2-2.5% for HFO / 4-5% for VR and Bitumen. 3. Iron Oxides: 2-2.5% across all feeds. 4. Silicon Dioxide: 2-2.5% for HFO / 4-5% for Bitumen and VR. 5. Remaining Volume: Filled with C-oil. Note: One barrel (200 Liters) of this mixture is added for every 5 tons of HFO, VR, or Bitumen. Manufacturing Mechanism: All components are placed in a tank, initially mixed with water, and heated to 80-120°C with continuous mixing (20-30 RPM). Once foam is generated, the product is allowed to cool to 80°C. The heating process up to 120°C is repeated 3 or 4 times until foaming ceases. Finally, the temperature is raised to 150°C, and the mixture is topped off to 200 liters using C-oil. To further improve light compound specifications, Zinc Oxide (300 grams) is mixed with 20 kg of Bentonite in C-oil. This is added alongside the catalyst at a ratio of 1/5 barrel of catalyst added to the reactor.
019
Hero
Specialized Bitumen Refining Plant Governorate: Anbar / Hit District Production Capacity: ( ) Tons/Day The city of Hit in the Anbar Governorate is considered one of the most famous areas in the world for its natural "bitumen springs," which have been used for thousands of years (dating back to the Babylonian and Assyrian eras). However, processing this bitumen for modern use requires technical steps to transform it from a raw material into a viable product for construction or industrial applications. Bitumen emerges from these springs as a highly viscous liquid mixed with sulfurous water, salts, and mud impurities. This "Natural Asphalt" differs from petroleum bitumen produced in refineries, and it can also appear in the form of rocky or spongy blocks mixed with mud. To obtain industrially usable products from this bitumen, specifically for: 1. Waterproofing (Felt/Membranes): Considered one of the best coating materials for building foundations to prevent moisture leakage due to its high resistance to hydrolysis. 2. Road Paving: Mixed with gravel and sand to produce asphalt concrete. It is characterized by exceptionally high cohesive strength compared to industrial bitumen. The natural bitumen from these springs must undergo several fundamental processing stages to become industrially viable: 1. Collection and Sedimentation: Bitumen is collected from the springs or quarry sites and left in designated basins to allow the sulfurous water to naturally separate (due to density differences). 2. Primary Heating: The raw bitumen is placed in large boilers to: a. Evaporate the remaining water. b. Reduce viscosity for easier handling. 3. Filtration and Purification: The heated bitumen is screened to remove solid impurities such as gravel, dirt, and suspended organic matter. 4. Secondary Heating and Cooking: The temperature of the bitumen is raised, improving agents are added, and it is prepared for the vacuum distillation process. 5. Vacuum Distillation: The distillation process is conducted under low pressure (vacuum pressure), which allows for: a. The separation of light oils and volatile substances at lower temperatures. b. The production of highly pure "Hard Asphalt," which is highly demanded in the construction industry. ________________________________________ Plant Components and Operational Stages The specialized bitumen plant for processing raw natural bitumen (in both liquid and solid states) consists of a range of specialized equipment designed according to the latest international standards. This equipment aligns with the technical and engineering requirements for bitumen products, complies with Iraqi standard specifications, and adheres to environmental considerations in the Anbar Governorate. 1. Extraction Stage The raw material (solid or liquid) is extracted from quarries designated by the Geological Survey Authority using specialized mechanical equipment. It is stored in stocks or special basins for solid materials, then transported to the refinery site using specialized transport vehicles of various capacities. 2. Storage Stage The raw materials are stored in designated yards to ensure a sufficient inventory for continuous, uninterrupted production for no less than 7 working days. 3. Raw Material Preparation and Primary Heating Stage Raw materials are fed into the plant via hydraulic lifts. This stage includes: • 3-1: Crushing and Digestion: Solid raw materials from the quarries are broken down and digested using a digester (SH-01) equipped with double blades driven by hydraulic motors (22.5 kW capacity). The digester is 5 meters long and 1.80 meters in diameter, made of carbon steel, with Stainless Steel 304 blades. It includes a Stainless Steel piston driven by a 7.5 kW electric motor. • 3-2: Primary Heating: This melts the bitumen and improves pumpability through pipes and pumps. • 3-3: Efficiency Enhancement: To increase melting efficiency, Gas Oil is added to the primary heating basin at a ratio of 1:5 per ton of solid raw material entering the basin (this ratio decreases when using liquid raw bitumen). o 3-2-1: Primary Melting Basin (TK-01): Raw material is heated in a concrete tank (25m L x 5m W x 3m H) with a maximum storage capacity of 300 tons. Heating pipes circulate thermal fluid (oil) at 125°C, with a retention time of 4-6 hours. The tank is internally lined with 6-8 mm carbon steel plates to protect the heating pipes from corrosion. It contains 8 Stainless Steel 304 mixers (MX-01 A/B/C/D/E/F) driven by 7.5 kW electric motors (50 RPM) and gearboxes (1:60 ratio) to mix the material, increase heating efficiency, reduce retention time, and circulate the melted bitumen to eliminate dissolved water, resulting in a homogeneous melt. Covered with a carbon steel roof with service hatches, it connects to an air duct (30x60 cm) linked to 2 air blowers (AB-01A/B) (one operating, one standby) at 22.5 kW / 1500 RPM. These extract water vapor and sulfur fumes, sending them to a scrubber before atmospheric release and water recycling. o 3-2-2: Primary Collection Tank (V-01): A carbon steel tank (12-14 mm thick) with a maximum capacity of 125 tons (10m L x 5m W x 3m H). It connects directly to the primary tank (TK-01) via channels and movable gates to receive only liquid raw material. It contains thermal oil pipes to maintain the liquid raw material at 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum outer cover. Impurities larger than 35 mm are removed and collected in a waste tank. o 3-2-3: Screw Conveyors (SC-01 A/B): Carbon steel screw conveyors with a double-jacketed outer cover filled with thermal oil to maintain the 140°C temperature. Driven by 22.5 kW electric motors (3000 RPM) with 1:40 gearboxes, they transport the liquid raw material to the preliminary filtration unit. 4. Purification Unit Removes suspended impurities from the liquid raw material in two stages: • 4-1: Preliminary Purification Tank (V-02): A carbon steel tank (12-14 mm thick, 125-ton capacity, 5m L x 10m W x 3m H). Receives liquid raw material from the primary collection tank. Contains thermal oil pipes to maintain 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Impurities larger than 15 mm are removed to a waste tank. Material is pumped to the final filtration stage via gear pumps (GP-01 A/B) (one operating, one standby) at 22.5 kW / 1000 RPM. • 4-2: Final Filtration Unit (FT-01): Removes remaining impurities by passing liquids through box filters arranged in 2 trains (8 per train). They feature a two-layer Stainless Steel filter mesh (specified microns) wrapped around square boxes. Liquid enters from the outside, and pure liquid is collected from the inside via a pipe network connected to a manifold. This is driven by two vacuum pumps (VP-01A/B) connected to the raw material tanks. 5. Raw Material Tanks (V-03 A-J) Ten carbon steel tanks (2.5m diameter, 9m length, 14 mm thickness, 45-ton max capacity) equipped with thermal oil heating coils. They receive, store, and prepare the purified raw material for the subsequent cooking reaction. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Connected by a pipe/valve network, the material is pumped via two centrifugal pumps (P-01 A/B) at 22.5 kW / 3000 RPM to the reactor unit. The tanks connect to a pipe network driven by vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM, pushing heating gases and vapors to the gas washing tank (V-14). 6. Reactor (Cooking) Unit (V-04 A/B) Consists of three reactors (55 tons each) that prepare the raw material for vacuum distillation and extract light naphtha compounds. • 6-1: Cooking Process: o 6-1-1: Catalyst System: Consists of two tanks. One prepares the catalyst mixture (1.5m dia, 4m H, 8mm carbon steel) with a mixer (MX-03) driven by a hydromotor and 1:40 gearbox. The second stores Gas Oil added to the preparation unit (1.5m dia, 1m H, 5mm carbon steel) with a 0.5 HP centrifugal pump. o 6-1-2: Reaction Tanks (V-04/05/06A): Three carbon steel tanks (2.8m dia, 9m L, 14mm thick, 55-ton max). Each has 2 Stainless Steel mixers (MX-02 A/B/C/D/E/F) driven by a 7.5 kW motor (1500 RPM) with a 1:40 gearbox. Contains an internal heating system powered by a Gas Oil burner to raise the temperature to 180°C. Catalyst is injected via dosing pumps (DP-01A/B) to increase naphtha extraction efficiency. Material is circulated during cooking by two centrifugal pumps per reactor (P-04A/B/C/D/E/F) (one active, one standby) to reduce retention time to 3-4 hours. After cooking, material is moved to the attached tank (V-04/05/06B) for storage before distillation. Fully insulated. o 6-1-3: Cooked Material Tank (V-04/05/06B): Carbon steel tank (2.8m dia, 9m L, 14mm thick) with thermal oil pipes to maintain 190-200°C. Fully insulated. Material is pumped to the vacuum distillation tower via centrifugal pumps (P-05A/B) (one active, one standby) at 22.5 kW / 3000 RPM. 7. Raw Naphtha Storage Unit Collects and condenses naphtha extracted during cooking. • 7-1-1: Raw Naphtha Tanks (V-07A/B/C): Three vertical Stainless Steel 304 tanks (1.5m dia, 5m H) connected to three heat exchangers and two pump pairs. Equipped internally with water spray nozzles on a ring pipe to wash non-condensable gases. • 7-1-2: Heat Exchangers (HE-01A/B/C): Condense naphtha vapors from 140°C down to 40°C using water from the cooling tower. Connected in series. Shell & Tube type, carbon steel (510 mm dia, 6m L) with 70 tubes (0.75-inch dia) in two rows of 35. Includes internal baffles for efficiency. • 7-1-3: Supporting Pumps: Vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM draw naphtha vapors from reactors to the heat exchangers, pushing non-condensable gases to the scrubber (V-14). Centrifugal pumps (P-02A/B) at 11.5 kW / 1500 RPM transport liquid raw naphtha to the Bleaching Unit. 8. Vacuum Distillation Unit The core of the plant, separating remaining light compounds and producing hard asphalt. • 8-1-1: Vacuum Distillation Tower: A vertical tower (~16m total height, 14mm carbon steel). Bottom section (Reboiler) is 3.5m dia x 1.2m H; top section is 1.5m dia x 12m H. Fully insulated. Fed with cooked material at 190-200°C via pumps (P-05A/B). To start extraction (remaining naphtha, Gas Oil, diesel), temperature is raised to 240-250°C using Heating Coil 1 via pumps (P-08A/B) at 55 kW / 3000 RPM, with continuous circulation via pumps (P-07A/B). Vacuum pumps (VP-03A/B) maintain 0.3-0.5 mbar pressure. Light compounds are extracted, condensed (HE-02A/B/C), and stored (V-08/09/10 A/B) over 2.5-3 hours. Afterward, material is heated via Heating Coil 2 to 320-340°C to finalize extraction and produce hard bitumen. Product is extracted via pumps (P-07A/B) at ~320°C, cooled via cooling tower coils, and sent to final tanks (V-18A/B/C). Batch processing takes 6-7 hours daily; continuous operation is possible. • 8-1-2: Supporting Pumps: Vacuum pumps (VP-03A/B) at 5.5 kW / 3000 RPM draw light vapors for condensation. Circulation centrifugal pumps (P-08A/B) at 55 kW move hot material to heating coils; (P-07A/B) circulate material and pump final bitumen product. • 8-1-3: Heating Coils 1 & 2: Carbon steel 4-inch diameter coils heated externally by a Gas Oil burner. Connected in series to heat liquid bitumen in two stages to prevent degradation. • 8-2: Heat Exchangers (HE-02A/B/C): Condense light compound vapors from 240°C to 40°C. Shell & Tube type, carbon steel (600 mm dia, 6m L) with 80 tubes (1-inch dia) in two rows of 40, equipped with baffles. • 8-3: Light Compound Tanks (V-08A/B, V-09A/B, V-10A/B): Six horizontal carbon steel tanks (1.5m dia, 4.5m L, 14mm thick). Receive condensates, linked to heat exchangers and vacuum pumps. Liquids are pumped to the Bleaching Unit via centrifugal pumps (P-06A/B) at 7.5 kW / 1500 RPM. 9. Bleaching Unit Improves the specifications of raw light compounds for local use and marketing. • 9-1: Collection Tank (V-11): Horizontal carbon steel tank (1m dia, 2.5m L, 14mm thick) placed above the system to store and distribute light compounds to the bleaching columns. • 9-2: Bleaching Columns (V-12A/B/C): Three vertical carbon steel vessels (1m dia, 4.5m H, 14mm thick). Contain a 15 cm catalyst layer on trays to bleach raw liquids into high-quality compounds, collected in a bottom horizontal tank. The catalyst is a calcined mixture of Bentonite and Zinc Oxide granules (2-3 mm) homogenized in water, which can be reactivated with steam and 5% HCl. • 9-3: Supporting Pumps: Vacuum pumps (VP-04A/B) at 5.5 kW extract vapors to the scrubber. Centrifugal pumps (P-09A/B) at 7.5 kW push bleached liquids to final tanks. 10. Production Tanks (V-13 A-F & V-18 A-C) • Light Products: Six horizontal carbon steel tanks (2.8m dia, 9m L, 55-ton capacity). V-13A/B for light naphtha, V-13C/D for Gas Oil, V-13E/F for diesel. • Asphalt: Three vertical carbon steel tanks (V-18A/B/C) (5m dia, 9m H). Equipped with thermal oil heating coils to keep asphalt liquid. Fully insulated (90 kg/m³ glass wool, 1.8mm aluminum cover). 11. Supporting Systems • 11-1: Gas Washing (Scrubber) System: Treats non-condensable gases before atmospheric release. Contains V-14 washing tank (1m dia, 2.8m L), a 500mm Flare stack with 3 ignitors, and a 1m x 1m LPG tank (V-15) for ignition. • 11-2: Cooling Tower: Provides cooling water for heat exchangers. Galvanized pressed steel basin (16m L x 2.4m W x 2.8m H), FRP casing, top fans, water distributors, and fill media. Includes Accumulator tank V-20 (1.5m dia, 2m L) and 11 kW pushing pumps (P-14A/B). • 11-3: Thermal Oil Boilers: Includes oil tank, heating boiler, oil pumps, and heating accelerators. • 11-4: Distillation Tower Raw Boilers • 11-5: Power Generation System • 11-6: Production Laboratory • 11-7: Control and Operation Room • 11-8: Catalyst System: Contains a vertical diesel tank (1m dia, 1.5m H) with a 1 kW centrifugal pump (P-11). Two vertical carbon steel tanks (V-17A/B, 1.5m dia, 4.5m H) with an MX-03 hydromotor mixer (7.5 kW, 30 RPM). V-17A is for preparation, V-17B pumps catalyst to the reactor. ________________________________________ Catalyst Chemical Components & Formulations 1. Alumina (Al2O3): Enhances the cracking of chemical bonds in heavy bitumen chains and increases Gas Oil extraction yield. 2. Manganese Dioxide (MnO2): Accelerates the reaction, reduces reaction time, and acts as a gasoline improver. 3. Silicon Dioxide (SiO2): Increases acceleration and reduces reaction time. 4. Iron Oxides (Fe2O): Accelerates the reaction, prevents pipe corrosion, and stops sulfur and wax from sticking to pipes and pumps. Weight Ratios (WT/WT) to Produce One Barrel (200 Liters) of Catalyst: 1. Alumina: Varies by feed: 2-2.5% for Bitumen / 4-5% for Vacuum Residue (VR) / 2-2.5% for Heavy Fuel Oil (HFO). To increase Gas Oil/Diesel (Light fuel) yield, Alumina can be added up to a maximum of 10%. 2. Manganese Dioxide: 2-2.5% for HFO / 4-5% for VR and Bitumen. 3. Iron Oxides: 2-2.5% across all feeds. 4. Silicon Dioxide: 2-2.5% for HFO / 4-5% for Bitumen and VR. 5. Remaining Volume: Filled with C-oil. Note: One barrel (200 Liters) of this mixture is added for every 5 tons of HFO, VR, or Bitumen. Manufacturing Mechanism: All components are placed in a tank, initially mixed with water, and heated to 80-120°C with continuous mixing (20-30 RPM). Once foam is generated, the product is allowed to cool to 80°C. The heating process up to 120°C is repeated 3 or 4 times until foaming ceases. Finally, the temperature is raised to 150°C, and the mixture is topped off to 200 liters using C-oil. To further improve light compound specifications, Zinc Oxide (300 grams) is mixed with 20 kg of Bentonite in C-oil. This is added alongside the catalyst at a ratio of 1/5 barrel of catalyst added to the reactor.
015
Hero
Specialized Bitumen Refining Plant Governorate: Anbar / Hit District Production Capacity: ( ) Tons/Day The city of Hit in the Anbar Governorate is considered one of the most famous areas in the world for its natural "bitumen springs," which have been used for thousands of years (dating back to the Babylonian and Assyrian eras). However, processing this bitumen for modern use requires technical steps to transform it from a raw material into a viable product for construction or industrial applications. Bitumen emerges from these springs as a highly viscous liquid mixed with sulfurous water, salts, and mud impurities. This "Natural Asphalt" differs from petroleum bitumen produced in refineries, and it can also appear in the form of rocky or spongy blocks mixed with mud. To obtain industrially usable products from this bitumen, specifically for: 1. Waterproofing (Felt/Membranes): Considered one of the best coating materials for building foundations to prevent moisture leakage due to its high resistance to hydrolysis. 2. Road Paving: Mixed with gravel and sand to produce asphalt concrete. It is characterized by exceptionally high cohesive strength compared to industrial bitumen. The natural bitumen from these springs must undergo several fundamental processing stages to become industrially viable: 1. Collection and Sedimentation: Bitumen is collected from the springs or quarry sites and left in designated basins to allow the sulfurous water to naturally separate (due to density differences). 2. Primary Heating: The raw bitumen is placed in large boilers to: a. Evaporate the remaining water. b. Reduce viscosity for easier handling. 3. Filtration and Purification: The heated bitumen is screened to remove solid impurities such as gravel, dirt, and suspended organic matter. 4. Secondary Heating and Cooking: The temperature of the bitumen is raised, improving agents are added, and it is prepared for the vacuum distillation process. 5. Vacuum Distillation: The distillation process is conducted under low pressure (vacuum pressure), which allows for: a. The separation of light oils and volatile substances at lower temperatures. b. The production of highly pure "Hard Asphalt," which is highly demanded in the construction industry. ________________________________________ Plant Components and Operational Stages The specialized bitumen plant for processing raw natural bitumen (in both liquid and solid states) consists of a range of specialized equipment designed according to the latest international standards. This equipment aligns with the technical and engineering requirements for bitumen products, complies with Iraqi standard specifications, and adheres to environmental considerations in the Anbar Governorate. 1. Extraction Stage The raw material (solid or liquid) is extracted from quarries designated by the Geological Survey Authority using specialized mechanical equipment. It is stored in stocks or special basins for solid materials, then transported to the refinery site using specialized transport vehicles of various capacities. 2. Storage Stage The raw materials are stored in designated yards to ensure a sufficient inventory for continuous, uninterrupted production for no less than 7 working days. 3. Raw Material Preparation and Primary Heating Stage Raw materials are fed into the plant via hydraulic lifts. This stage includes: • 3-1: Crushing and Digestion: Solid raw materials from the quarries are broken down and digested using a digester (SH-01) equipped with double blades driven by hydraulic motors (22.5 kW capacity). The digester is 5 meters long and 1.80 meters in diameter, made of carbon steel, with Stainless Steel 304 blades. It includes a Stainless Steel piston driven by a 7.5 kW electric motor. • 3-2: Primary Heating: This melts the bitumen and improves pumpability through pipes and pumps. • 3-3: Efficiency Enhancement: To increase melting efficiency, Gas Oil is added to the primary heating basin at a ratio of 1:5 per ton of solid raw material entering the basin (this ratio decreases when using liquid raw bitumen). o 3-2-1: Primary Melting Basin (TK-01): Raw material is heated in a concrete tank (25m L x 5m W x 3m H) with a maximum storage capacity of 300 tons. Heating pipes circulate thermal fluid (oil) at 125°C, with a retention time of 4-6 hours. The tank is internally lined with 6-8 mm carbon steel plates to protect the heating pipes from corrosion. It contains 8 Stainless Steel 304 mixers (MX-01 A/B/C/D/E/F) driven by 7.5 kW electric motors (50 RPM) and gearboxes (1:60 ratio) to mix the material, increase heating efficiency, reduce retention time, and circulate the melted bitumen to eliminate dissolved water, resulting in a homogeneous melt. Covered with a carbon steel roof with service hatches, it connects to an air duct (30x60 cm) linked to 2 air blowers (AB-01A/B) (one operating, one standby) at 22.5 kW / 1500 RPM. These extract water vapor and sulfur fumes, sending them to a scrubber before atmospheric release and water recycling. o 3-2-2: Primary Collection Tank (V-01): A carbon steel tank (12-14 mm thick) with a maximum capacity of 125 tons (10m L x 5m W x 3m H). It connects directly to the primary tank (TK-01) via channels and movable gates to receive only liquid raw material. It contains thermal oil pipes to maintain the liquid raw material at 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum outer cover. Impurities larger than 35 mm are removed and collected in a waste tank. o 3-2-3: Screw Conveyors (SC-01 A/B): Carbon steel screw conveyors with a double-jacketed outer cover filled with thermal oil to maintain the 140°C temperature. Driven by 22.5 kW electric motors (3000 RPM) with 1:40 gearboxes, they transport the liquid raw material to the preliminary filtration unit. 4. Purification Unit Removes suspended impurities from the liquid raw material in two stages: • 4-1: Preliminary Purification Tank (V-02): A carbon steel tank (12-14 mm thick, 125-ton capacity, 5m L x 10m W x 3m H). Receives liquid raw material from the primary collection tank. Contains thermal oil pipes to maintain 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Impurities larger than 15 mm are removed to a waste tank. Material is pumped to the final filtration stage via gear pumps (GP-01 A/B) (one operating, one standby) at 22.5 kW / 1000 RPM. • 4-2: Final Filtration Unit (FT-01): Removes remaining impurities by passing liquids through box filters arranged in 2 trains (8 per train). They feature a two-layer Stainless Steel filter mesh (specified microns) wrapped around square boxes. Liquid enters from the outside, and pure liquid is collected from the inside via a pipe network connected to a manifold. This is driven by two vacuum pumps (VP-01A/B) connected to the raw material tanks. 5. Raw Material Tanks (V-03 A-J) Ten carbon steel tanks (2.5m diameter, 9m length, 14 mm thickness, 45-ton max capacity) equipped with thermal oil heating coils. They receive, store, and prepare the purified raw material for the subsequent cooking reaction. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Connected by a pipe/valve network, the material is pumped via two centrifugal pumps (P-01 A/B) at 22.5 kW / 3000 RPM to the reactor unit. The tanks connect to a pipe network driven by vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM, pushing heating gases and vapors to the gas washing tank (V-14). 6. Reactor (Cooking) Unit (V-04 A/B) Consists of three reactors (55 tons each) that prepare the raw material for vacuum distillation and extract light naphtha compounds. • 6-1: Cooking Process: o 6-1-1: Catalyst System: Consists of two tanks. One prepares the catalyst mixture (1.5m dia, 4m H, 8mm carbon steel) with a mixer (MX-03) driven by a hydromotor and 1:40 gearbox. The second stores Gas Oil added to the preparation unit (1.5m dia, 1m H, 5mm carbon steel) with a 0.5 HP centrifugal pump. o 6-1-2: Reaction Tanks (V-04/05/06A): Three carbon steel tanks (2.8m dia, 9m L, 14mm thick, 55-ton max). Each has 2 Stainless Steel mixers (MX-02 A/B/C/D/E/F) driven by a 7.5 kW motor (1500 RPM) with a 1:40 gearbox. Contains an internal heating system powered by a Gas Oil burner to raise the temperature to 180°C. Catalyst is injected via dosing pumps (DP-01A/B) to increase naphtha extraction efficiency. Material is circulated during cooking by two centrifugal pumps per reactor (P-04A/B/C/D/E/F) (one active, one standby) to reduce retention time to 3-4 hours. After cooking, material is moved to the attached tank (V-04/05/06B) for storage before distillation. Fully insulated. o 6-1-3: Cooked Material Tank (V-04/05/06B): Carbon steel tank (2.8m dia, 9m L, 14mm thick) with thermal oil pipes to maintain 190-200°C. Fully insulated. Material is pumped to the vacuum distillation tower via centrifugal pumps (P-05A/B) (one active, one standby) at 22.5 kW / 3000 RPM. 7. Raw Naphtha Storage Unit Collects and condenses naphtha extracted during cooking. • 7-1-1: Raw Naphtha Tanks (V-07A/B/C): Three vertical Stainless Steel 304 tanks (1.5m dia, 5m H) connected to three heat exchangers and two pump pairs. Equipped internally with water spray nozzles on a ring pipe to wash non-condensable gases. • 7-1-2: Heat Exchangers (HE-01A/B/C): Condense naphtha vapors from 140°C down to 40°C using water from the cooling tower. Connected in series. Shell & Tube type, carbon steel (510 mm dia, 6m L) with 70 tubes (0.75-inch dia) in two rows of 35. Includes internal baffles for efficiency. • 7-1-3: Supporting Pumps: Vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM draw naphtha vapors from reactors to the heat exchangers, pushing non-condensable gases to the scrubber (V-14). Centrifugal pumps (P-02A/B) at 11.5 kW / 1500 RPM transport liquid raw naphtha to the Bleaching Unit. 8. Vacuum Distillation Unit The core of the plant, separating remaining light compounds and producing hard asphalt. • 8-1-1: Vacuum Distillation Tower: A vertical tower (~16m total height, 14mm carbon steel). Bottom section (Reboiler) is 3.5m dia x 1.2m H; top section is 1.5m dia x 12m H. Fully insulated. Fed with cooked material at 190-200°C via pumps (P-05A/B). To start extraction (remaining naphtha, Gas Oil, diesel), temperature is raised to 240-250°C using Heating Coil 1 via pumps (P-08A/B) at 55 kW / 3000 RPM, with continuous circulation via pumps (P-07A/B). Vacuum pumps (VP-03A/B) maintain 0.3-0.5 mbar pressure. Light compounds are extracted, condensed (HE-02A/B/C), and stored (V-08/09/10 A/B) over 2.5-3 hours. Afterward, material is heated via Heating Coil 2 to 320-340°C to finalize extraction and produce hard bitumen. Product is extracted via pumps (P-07A/B) at ~320°C, cooled via cooling tower coils, and sent to final tanks (V-18A/B/C). Batch processing takes 6-7 hours daily; continuous operation is possible. • 8-1-2: Supporting Pumps: Vacuum pumps (VP-03A/B) at 5.5 kW / 3000 RPM draw light vapors for condensation. Circulation centrifugal pumps (P-08A/B) at 55 kW move hot material to heating coils; (P-07A/B) circulate material and pump final bitumen product. • 8-1-3: Heating Coils 1 & 2: Carbon steel 4-inch diameter coils heated externally by a Gas Oil burner. Connected in series to heat liquid bitumen in two stages to prevent degradation. • 8-2: Heat Exchangers (HE-02A/B/C): Condense light compound vapors from 240°C to 40°C. Shell & Tube type, carbon steel (600 mm dia, 6m L) with 80 tubes (1-inch dia) in two rows of 40, equipped with baffles. • 8-3: Light Compound Tanks (V-08A/B, V-09A/B, V-10A/B): Six horizontal carbon steel tanks (1.5m dia, 4.5m L, 14mm thick). Receive condensates, linked to heat exchangers and vacuum pumps. Liquids are pumped to the Bleaching Unit via centrifugal pumps (P-06A/B) at 7.5 kW / 1500 RPM. 9. Bleaching Unit Improves the specifications of raw light compounds for local use and marketing. • 9-1: Collection Tank (V-11): Horizontal carbon steel tank (1m dia, 2.5m L, 14mm thick) placed above the system to store and distribute light compounds to the bleaching columns. • 9-2: Bleaching Columns (V-12A/B/C): Three vertical carbon steel vessels (1m dia, 4.5m H, 14mm thick). Contain a 15 cm catalyst layer on trays to bleach raw liquids into high-quality compounds, collected in a bottom horizontal tank. The catalyst is a calcined mixture of Bentonite and Zinc Oxide granules (2-3 mm) homogenized in water, which can be reactivated with steam and 5% HCl. • 9-3: Supporting Pumps: Vacuum pumps (VP-04A/B) at 5.5 kW extract vapors to the scrubber. Centrifugal pumps (P-09A/B) at 7.5 kW push bleached liquids to final tanks. 10. Production Tanks (V-13 A-F & V-18 A-C) • Light Products: Six horizontal carbon steel tanks (2.8m dia, 9m L, 55-ton capacity). V-13A/B for light naphtha, V-13C/D for Gas Oil, V-13E/F for diesel. • Asphalt: Three vertical carbon steel tanks (V-18A/B/C) (5m dia, 9m H). Equipped with thermal oil heating coils to keep asphalt liquid. Fully insulated (90 kg/m³ glass wool, 1.8mm aluminum cover). 11. Supporting Systems • 11-1: Gas Washing (Scrubber) System: Treats non-condensable gases before atmospheric release. Contains V-14 washing tank (1m dia, 2.8m L), a 500mm Flare stack with 3 ignitors, and a 1m x 1m LPG tank (V-15) for ignition. • 11-2: Cooling Tower: Provides cooling water for heat exchangers. Galvanized pressed steel basin (16m L x 2.4m W x 2.8m H), FRP casing, top fans, water distributors, and fill media. Includes Accumulator tank V-20 (1.5m dia, 2m L) and 11 kW pushing pumps (P-14A/B). • 11-3: Thermal Oil Boilers: Includes oil tank, heating boiler, oil pumps, and heating accelerators. • 11-4: Distillation Tower Raw Boilers • 11-5: Power Generation System • 11-6: Production Laboratory • 11-7: Control and Operation Room • 11-8: Catalyst System: Contains a vertical diesel tank (1m dia, 1.5m H) with a 1 kW centrifugal pump (P-11). Two vertical carbon steel tanks (V-17A/B, 1.5m dia, 4.5m H) with an MX-03 hydromotor mixer (7.5 kW, 30 RPM). V-17A is for preparation, V-17B pumps catalyst to the reactor. ________________________________________ Catalyst Chemical Components & Formulations 1. Alumina (Al2O3): Enhances the cracking of chemical bonds in heavy bitumen chains and increases Gas Oil extraction yield. 2. Manganese Dioxide (MnO2): Accelerates the reaction, reduces reaction time, and acts as a gasoline improver. 3. Silicon Dioxide (SiO2): Increases acceleration and reduces reaction time. 4. Iron Oxides (Fe2O): Accelerates the reaction, prevents pipe corrosion, and stops sulfur and wax from sticking to pipes and pumps. Weight Ratios (WT/WT) to Produce One Barrel (200 Liters) of Catalyst: 1. Alumina: Varies by feed: 2-2.5% for Bitumen / 4-5% for Vacuum Residue (VR) / 2-2.5% for Heavy Fuel Oil (HFO). To increase Gas Oil/Diesel (Light fuel) yield, Alumina can be added up to a maximum of 10%. 2. Manganese Dioxide: 2-2.5% for HFO / 4-5% for VR and Bitumen. 3. Iron Oxides: 2-2.5% across all feeds. 4. Silicon Dioxide: 2-2.5% for HFO / 4-5% for Bitumen and VR. 5. Remaining Volume: Filled with C-oil. Note: One barrel (200 Liters) of this mixture is added for every 5 tons of HFO, VR, or Bitumen. Manufacturing Mechanism: All components are placed in a tank, initially mixed with water, and heated to 80-120°C with continuous mixing (20-30 RPM). Once foam is generated, the product is allowed to cool to 80°C. The heating process up to 120°C is repeated 3 or 4 times until foaming ceases. Finally, the temperature is raised to 150°C, and the mixture is topped off to 200 liters using C-oil. To further improve light compound specifications, Zinc Oxide (300 grams) is mixed with 20 kg of Bentonite in C-oil. This is added alongside the catalyst at a ratio of 1/5 barrel of catalyst added to the reactor.
012
Hero
Specialized Bitumen Refining Plant Governorate: Anbar / Hit District Production Capacity: ( ) Tons/Day The city of Hit in the Anbar Governorate is considered one of the most famous areas in the world for its natural "bitumen springs," which have been used for thousands of years (dating back to the Babylonian and Assyrian eras). However, processing this bitumen for modern use requires technical steps to transform it from a raw material into a viable product for construction or industrial applications. Bitumen emerges from these springs as a highly viscous liquid mixed with sulfurous water, salts, and mud impurities. This "Natural Asphalt" differs from petroleum bitumen produced in refineries, and it can also appear in the form of rocky or spongy blocks mixed with mud. To obtain industrially usable products from this bitumen, specifically for: 1. Waterproofing (Felt/Membranes): Considered one of the best coating materials for building foundations to prevent moisture leakage due to its high resistance to hydrolysis. 2. Road Paving: Mixed with gravel and sand to produce asphalt concrete. It is characterized by exceptionally high cohesive strength compared to industrial bitumen. The natural bitumen from these springs must undergo several fundamental processing stages to become industrially viable: 1. Collection and Sedimentation: Bitumen is collected from the springs or quarry sites and left in designated basins to allow the sulfurous water to naturally separate (due to density differences). 2. Primary Heating: The raw bitumen is placed in large boilers to: a. Evaporate the remaining water. b. Reduce viscosity for easier handling. 3. Filtration and Purification: The heated bitumen is screened to remove solid impurities such as gravel, dirt, and suspended organic matter. 4. Secondary Heating and Cooking: The temperature of the bitumen is raised, improving agents are added, and it is prepared for the vacuum distillation process. 5. Vacuum Distillation: The distillation process is conducted under low pressure (vacuum pressure), which allows for: a. The separation of light oils and volatile substances at lower temperatures. b. The production of highly pure "Hard Asphalt," which is highly demanded in the construction industry. ________________________________________ Plant Components and Operational Stages The specialized bitumen plant for processing raw natural bitumen (in both liquid and solid states) consists of a range of specialized equipment designed according to the latest international standards. This equipment aligns with the technical and engineering requirements for bitumen products, complies with Iraqi standard specifications, and adheres to environmental considerations in the Anbar Governorate. 1. Extraction Stage The raw material (solid or liquid) is extracted from quarries designated by the Geological Survey Authority using specialized mechanical equipment. It is stored in stocks or special basins for solid materials, then transported to the refinery site using specialized transport vehicles of various capacities. 2. Storage Stage The raw materials are stored in designated yards to ensure a sufficient inventory for continuous, uninterrupted production for no less than 7 working days. 3. Raw Material Preparation and Primary Heating Stage Raw materials are fed into the plant via hydraulic lifts. This stage includes: • 3-1: Crushing and Digestion: Solid raw materials from the quarries are broken down and digested using a digester (SH-01) equipped with double blades driven by hydraulic motors (22.5 kW capacity). The digester is 5 meters long and 1.80 meters in diameter, made of carbon steel, with Stainless Steel 304 blades. It includes a Stainless Steel piston driven by a 7.5 kW electric motor. • 3-2: Primary Heating: This melts the bitumen and improves pumpability through pipes and pumps. • 3-3: Efficiency Enhancement: To increase melting efficiency, Gas Oil is added to the primary heating basin at a ratio of 1:5 per ton of solid raw material entering the basin (this ratio decreases when using liquid raw bitumen). o 3-2-1: Primary Melting Basin (TK-01): Raw material is heated in a concrete tank (25m L x 5m W x 3m H) with a maximum storage capacity of 300 tons. Heating pipes circulate thermal fluid (oil) at 125°C, with a retention time of 4-6 hours. The tank is internally lined with 6-8 mm carbon steel plates to protect the heating pipes from corrosion. It contains 8 Stainless Steel 304 mixers (MX-01 A/B/C/D/E/F) driven by 7.5 kW electric motors (50 RPM) and gearboxes (1:60 ratio) to mix the material, increase heating efficiency, reduce retention time, and circulate the melted bitumen to eliminate dissolved water, resulting in a homogeneous melt. Covered with a carbon steel roof with service hatches, it connects to an air duct (30x60 cm) linked to 2 air blowers (AB-01A/B) (one operating, one standby) at 22.5 kW / 1500 RPM. These extract water vapor and sulfur fumes, sending them to a scrubber before atmospheric release and water recycling. o 3-2-2: Primary Collection Tank (V-01): A carbon steel tank (12-14 mm thick) with a maximum capacity of 125 tons (10m L x 5m W x 3m H). It connects directly to the primary tank (TK-01) via channels and movable gates to receive only liquid raw material. It contains thermal oil pipes to maintain the liquid raw material at 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum outer cover. Impurities larger than 35 mm are removed and collected in a waste tank. o 3-2-3: Screw Conveyors (SC-01 A/B): Carbon steel screw conveyors with a double-jacketed outer cover filled with thermal oil to maintain the 140°C temperature. Driven by 22.5 kW electric motors (3000 RPM) with 1:40 gearboxes, they transport the liquid raw material to the preliminary filtration unit. 4. Purification Unit Removes suspended impurities from the liquid raw material in two stages: • 4-1: Preliminary Purification Tank (V-02): A carbon steel tank (12-14 mm thick, 125-ton capacity, 5m L x 10m W x 3m H). Receives liquid raw material from the primary collection tank. Contains thermal oil pipes to maintain 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Impurities larger than 15 mm are removed to a waste tank. Material is pumped to the final filtration stage via gear pumps (GP-01 A/B) (one operating, one standby) at 22.5 kW / 1000 RPM. • 4-2: Final Filtration Unit (FT-01): Removes remaining impurities by passing liquids through box filters arranged in 2 trains (8 per train). They feature a two-layer Stainless Steel filter mesh (specified microns) wrapped around square boxes. Liquid enters from the outside, and pure liquid is collected from the inside via a pipe network connected to a manifold. This is driven by two vacuum pumps (VP-01A/B) connected to the raw material tanks. 5. Raw Material Tanks (V-03 A-J) Ten carbon steel tanks (2.5m diameter, 9m length, 14 mm thickness, 45-ton max capacity) equipped with thermal oil heating coils. They receive, store, and prepare the purified raw material for the subsequent cooking reaction. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Connected by a pipe/valve network, the material is pumped via two centrifugal pumps (P-01 A/B) at 22.5 kW / 3000 RPM to the reactor unit. The tanks connect to a pipe network driven by vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM, pushing heating gases and vapors to the gas washing tank (V-14). 6. Reactor (Cooking) Unit (V-04 A/B) Consists of three reactors (55 tons each) that prepare the raw material for vacuum distillation and extract light naphtha compounds. • 6-1: Cooking Process: o 6-1-1: Catalyst System: Consists of two tanks. One prepares the catalyst mixture (1.5m dia, 4m H, 8mm carbon steel) with a mixer (MX-03) driven by a hydromotor and 1:40 gearbox. The second stores Gas Oil added to the preparation unit (1.5m dia, 1m H, 5mm carbon steel) with a 0.5 HP centrifugal pump. o 6-1-2: Reaction Tanks (V-04/05/06A): Three carbon steel tanks (2.8m dia, 9m L, 14mm thick, 55-ton max). Each has 2 Stainless Steel mixers (MX-02 A/B/C/D/E/F) driven by a 7.5 kW motor (1500 RPM) with a 1:40 gearbox. Contains an internal heating system powered by a Gas Oil burner to raise the temperature to 180°C. Catalyst is injected via dosing pumps (DP-01A/B) to increase naphtha extraction efficiency. Material is circulated during cooking by two centrifugal pumps per reactor (P-04A/B/C/D/E/F) (one active, one standby) to reduce retention time to 3-4 hours. After cooking, material is moved to the attached tank (V-04/05/06B) for storage before distillation. Fully insulated. o 6-1-3: Cooked Material Tank (V-04/05/06B): Carbon steel tank (2.8m dia, 9m L, 14mm thick) with thermal oil pipes to maintain 190-200°C. Fully insulated. Material is pumped to the vacuum distillation tower via centrifugal pumps (P-05A/B) (one active, one standby) at 22.5 kW / 3000 RPM. 7. Raw Naphtha Storage Unit Collects and condenses naphtha extracted during cooking. • 7-1-1: Raw Naphtha Tanks (V-07A/B/C): Three vertical Stainless Steel 304 tanks (1.5m dia, 5m H) connected to three heat exchangers and two pump pairs. Equipped internally with water spray nozzles on a ring pipe to wash non-condensable gases. • 7-1-2: Heat Exchangers (HE-01A/B/C): Condense naphtha vapors from 140°C down to 40°C using water from the cooling tower. Connected in series. Shell & Tube type, carbon steel (510 mm dia, 6m L) with 70 tubes (0.75-inch dia) in two rows of 35. Includes internal baffles for efficiency. • 7-1-3: Supporting Pumps: Vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM draw naphtha vapors from reactors to the heat exchangers, pushing non-condensable gases to the scrubber (V-14). Centrifugal pumps (P-02A/B) at 11.5 kW / 1500 RPM transport liquid raw naphtha to the Bleaching Unit. 8. Vacuum Distillation Unit The core of the plant, separating remaining light compounds and producing hard asphalt. • 8-1-1: Vacuum Distillation Tower: A vertical tower (~16m total height, 14mm carbon steel). Bottom section (Reboiler) is 3.5m dia x 1.2m H; top section is 1.5m dia x 12m H. Fully insulated. Fed with cooked material at 190-200°C via pumps (P-05A/B). To start extraction (remaining naphtha, Gas Oil, diesel), temperature is raised to 240-250°C using Heating Coil 1 via pumps (P-08A/B) at 55 kW / 3000 RPM, with continuous circulation via pumps (P-07A/B). Vacuum pumps (VP-03A/B) maintain 0.3-0.5 mbar pressure. Light compounds are extracted, condensed (HE-02A/B/C), and stored (V-08/09/10 A/B) over 2.5-3 hours. Afterward, material is heated via Heating Coil 2 to 320-340°C to finalize extraction and produce hard bitumen. Product is extracted via pumps (P-07A/B) at ~320°C, cooled via cooling tower coils, and sent to final tanks (V-18A/B/C). Batch processing takes 6-7 hours daily; continuous operation is possible. • 8-1-2: Supporting Pumps: Vacuum pumps (VP-03A/B) at 5.5 kW / 3000 RPM draw light vapors for condensation. Circulation centrifugal pumps (P-08A/B) at 55 kW move hot material to heating coils; (P-07A/B) circulate material and pump final bitumen product. • 8-1-3: Heating Coils 1 & 2: Carbon steel 4-inch diameter coils heated externally by a Gas Oil burner. Connected in series to heat liquid bitumen in two stages to prevent degradation. • 8-2: Heat Exchangers (HE-02A/B/C): Condense light compound vapors from 240°C to 40°C. Shell & Tube type, carbon steel (600 mm dia, 6m L) with 80 tubes (1-inch dia) in two rows of 40, equipped with baffles. • 8-3: Light Compound Tanks (V-08A/B, V-09A/B, V-10A/B): Six horizontal carbon steel tanks (1.5m dia, 4.5m L, 14mm thick). Receive condensates, linked to heat exchangers and vacuum pumps. Liquids are pumped to the Bleaching Unit via centrifugal pumps (P-06A/B) at 7.5 kW / 1500 RPM. 9. Bleaching Unit Improves the specifications of raw light compounds for local use and marketing. • 9-1: Collection Tank (V-11): Horizontal carbon steel tank (1m dia, 2.5m L, 14mm thick) placed above the system to store and distribute light compounds to the bleaching columns. • 9-2: Bleaching Columns (V-12A/B/C): Three vertical carbon steel vessels (1m dia, 4.5m H, 14mm thick). Contain a 15 cm catalyst layer on trays to bleach raw liquids into high-quality compounds, collected in a bottom horizontal tank. The catalyst is a calcined mixture of Bentonite and Zinc Oxide granules (2-3 mm) homogenized in water, which can be reactivated with steam and 5% HCl. • 9-3: Supporting Pumps: Vacuum pumps (VP-04A/B) at 5.5 kW extract vapors to the scrubber. Centrifugal pumps (P-09A/B) at 7.5 kW push bleached liquids to final tanks. 10. Production Tanks (V-13 A-F & V-18 A-C) • Light Products: Six horizontal carbon steel tanks (2.8m dia, 9m L, 55-ton capacity). V-13A/B for light naphtha, V-13C/D for Gas Oil, V-13E/F for diesel. • Asphalt: Three vertical carbon steel tanks (V-18A/B/C) (5m dia, 9m H). Equipped with thermal oil heating coils to keep asphalt liquid. Fully insulated (90 kg/m³ glass wool, 1.8mm aluminum cover). 11. Supporting Systems • 11-1: Gas Washing (Scrubber) System: Treats non-condensable gases before atmospheric release. Contains V-14 washing tank (1m dia, 2.8m L), a 500mm Flare stack with 3 ignitors, and a 1m x 1m LPG tank (V-15) for ignition. • 11-2: Cooling Tower: Provides cooling water for heat exchangers. Galvanized pressed steel basin (16m L x 2.4m W x 2.8m H), FRP casing, top fans, water distributors, and fill media. Includes Accumulator tank V-20 (1.5m dia, 2m L) and 11 kW pushing pumps (P-14A/B). • 11-3: Thermal Oil Boilers: Includes oil tank, heating boiler, oil pumps, and heating accelerators. • 11-4: Distillation Tower Raw Boilers • 11-5: Power Generation System • 11-6: Production Laboratory • 11-7: Control and Operation Room • 11-8: Catalyst System: Contains a vertical diesel tank (1m dia, 1.5m H) with a 1 kW centrifugal pump (P-11). Two vertical carbon steel tanks (V-17A/B, 1.5m dia, 4.5m H) with an MX-03 hydromotor mixer (7.5 kW, 30 RPM). V-17A is for preparation, V-17B pumps catalyst to the reactor. ________________________________________ Catalyst Chemical Components & Formulations 1. Alumina (Al2O3): Enhances the cracking of chemical bonds in heavy bitumen chains and increases Gas Oil extraction yield. 2. Manganese Dioxide (MnO2): Accelerates the reaction, reduces reaction time, and acts as a gasoline improver. 3. Silicon Dioxide (SiO2): Increases acceleration and reduces reaction time. 4. Iron Oxides (Fe2O): Accelerates the reaction, prevents pipe corrosion, and stops sulfur and wax from sticking to pipes and pumps. Weight Ratios (WT/WT) to Produce One Barrel (200 Liters) of Catalyst: 1. Alumina: Varies by feed: 2-2.5% for Bitumen / 4-5% for Vacuum Residue (VR) / 2-2.5% for Heavy Fuel Oil (HFO). To increase Gas Oil/Diesel (Light fuel) yield, Alumina can be added up to a maximum of 10%. 2. Manganese Dioxide: 2-2.5% for HFO / 4-5% for VR and Bitumen. 3. Iron Oxides: 2-2.5% across all feeds. 4. Silicon Dioxide: 2-2.5% for HFO / 4-5% for Bitumen and VR. 5. Remaining Volume: Filled with C-oil. Note: One barrel (200 Liters) of this mixture is added for every 5 tons of HFO, VR, or Bitumen. Manufacturing Mechanism: All components are placed in a tank, initially mixed with water, and heated to 80-120°C with continuous mixing (20-30 RPM). Once foam is generated, the product is allowed to cool to 80°C. The heating process up to 120°C is repeated 3 or 4 times until foaming ceases. Finally, the temperature is raised to 150°C, and the mixture is topped off to 200 liters using C-oil. To further improve light compound specifications, Zinc Oxide (300 grams) is mixed with 20 kg of Bentonite in C-oil. This is added alongside the catalyst at a ratio of 1/5 barrel of catalyst added to the reactor.
010
Hero
Specialized Bitumen Refining Plant Governorate: Anbar / Hit District Production Capacity: ( ) Tons/Day The city of Hit in the Anbar Governorate is considered one of the most famous areas in the world for its natural "bitumen springs," which have been used for thousands of years (dating back to the Babylonian and Assyrian eras). However, processing this bitumen for modern use requires technical steps to transform it from a raw material into a viable product for construction or industrial applications. Bitumen emerges from these springs as a highly viscous liquid mixed with sulfurous water, salts, and mud impurities. This "Natural Asphalt" differs from petroleum bitumen produced in refineries, and it can also appear in the form of rocky or spongy blocks mixed with mud. To obtain industrially usable products from this bitumen, specifically for: 1. Waterproofing (Felt/Membranes): Considered one of the best coating materials for building foundations to prevent moisture leakage due to its high resistance to hydrolysis. 2. Road Paving: Mixed with gravel and sand to produce asphalt concrete. It is characterized by exceptionally high cohesive strength compared to industrial bitumen. The natural bitumen from these springs must undergo several fundamental processing stages to become industrially viable: 1. Collection and Sedimentation: Bitumen is collected from the springs or quarry sites and left in designated basins to allow the sulfurous water to naturally separate (due to density differences). 2. Primary Heating: The raw bitumen is placed in large boilers to: a. Evaporate the remaining water. b. Reduce viscosity for easier handling. 3. Filtration and Purification: The heated bitumen is screened to remove solid impurities such as gravel, dirt, and suspended organic matter. 4. Secondary Heating and Cooking: The temperature of the bitumen is raised, improving agents are added, and it is prepared for the vacuum distillation process. 5. Vacuum Distillation: The distillation process is conducted under low pressure (vacuum pressure), which allows for: a. The separation of light oils and volatile substances at lower temperatures. b. The production of highly pure "Hard Asphalt," which is highly demanded in the construction industry. ________________________________________ Plant Components and Operational Stages The specialized bitumen plant for processing raw natural bitumen (in both liquid and solid states) consists of a range of specialized equipment designed according to the latest international standards. This equipment aligns with the technical and engineering requirements for bitumen products, complies with Iraqi standard specifications, and adheres to environmental considerations in the Anbar Governorate. 1. Extraction Stage The raw material (solid or liquid) is extracted from quarries designated by the Geological Survey Authority using specialized mechanical equipment. It is stored in stocks or special basins for solid materials, then transported to the refinery site using specialized transport vehicles of various capacities. 2. Storage Stage The raw materials are stored in designated yards to ensure a sufficient inventory for continuous, uninterrupted production for no less than 7 working days. 3. Raw Material Preparation and Primary Heating Stage Raw materials are fed into the plant via hydraulic lifts. This stage includes: • 3-1: Crushing and Digestion: Solid raw materials from the quarries are broken down and digested using a digester (SH-01) equipped with double blades driven by hydraulic motors (22.5 kW capacity). The digester is 5 meters long and 1.80 meters in diameter, made of carbon steel, with Stainless Steel 304 blades. It includes a Stainless Steel piston driven by a 7.5 kW electric motor. • 3-2: Primary Heating: This melts the bitumen and improves pumpability through pipes and pumps. • 3-3: Efficiency Enhancement: To increase melting efficiency, Gas Oil is added to the primary heating basin at a ratio of 1:5 per ton of solid raw material entering the basin (this ratio decreases when using liquid raw bitumen). o 3-2-1: Primary Melting Basin (TK-01): Raw material is heated in a concrete tank (25m L x 5m W x 3m H) with a maximum storage capacity of 300 tons. Heating pipes circulate thermal fluid (oil) at 125°C, with a retention time of 4-6 hours. The tank is internally lined with 6-8 mm carbon steel plates to protect the heating pipes from corrosion. It contains 8 Stainless Steel 304 mixers (MX-01 A/B/C/D/E/F) driven by 7.5 kW electric motors (50 RPM) and gearboxes (1:60 ratio) to mix the material, increase heating efficiency, reduce retention time, and circulate the melted bitumen to eliminate dissolved water, resulting in a homogeneous melt. Covered with a carbon steel roof with service hatches, it connects to an air duct (30x60 cm) linked to 2 air blowers (AB-01A/B) (one operating, one standby) at 22.5 kW / 1500 RPM. These extract water vapor and sulfur fumes, sending them to a scrubber before atmospheric release and water recycling. o 3-2-2: Primary Collection Tank (V-01): A carbon steel tank (12-14 mm thick) with a maximum capacity of 125 tons (10m L x 5m W x 3m H). It connects directly to the primary tank (TK-01) via channels and movable gates to receive only liquid raw material. It contains thermal oil pipes to maintain the liquid raw material at 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum outer cover. Impurities larger than 35 mm are removed and collected in a waste tank. o 3-2-3: Screw Conveyors (SC-01 A/B): Carbon steel screw conveyors with a double-jacketed outer cover filled with thermal oil to maintain the 140°C temperature. Driven by 22.5 kW electric motors (3000 RPM) with 1:40 gearboxes, they transport the liquid raw material to the preliminary filtration unit. 4. Purification Unit Removes suspended impurities from the liquid raw material in two stages: • 4-1: Preliminary Purification Tank (V-02): A carbon steel tank (12-14 mm thick, 125-ton capacity, 5m L x 10m W x 3m H). Receives liquid raw material from the primary collection tank. Contains thermal oil pipes to maintain 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Impurities larger than 15 mm are removed to a waste tank. Material is pumped to the final filtration stage via gear pumps (GP-01 A/B) (one operating, one standby) at 22.5 kW / 1000 RPM. • 4-2: Final Filtration Unit (FT-01): Removes remaining impurities by passing liquids through box filters arranged in 2 trains (8 per train). They feature a two-layer Stainless Steel filter mesh (specified microns) wrapped around square boxes. Liquid enters from the outside, and pure liquid is collected from the inside via a pipe network connected to a manifold. This is driven by two vacuum pumps (VP-01A/B) connected to the raw material tanks. 5. Raw Material Tanks (V-03 A-J) Ten carbon steel tanks (2.5m diameter, 9m length, 14 mm thickness, 45-ton max capacity) equipped with thermal oil heating coils. They receive, store, and prepare the purified raw material for the subsequent cooking reaction. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Connected by a pipe/valve network, the material is pumped via two centrifugal pumps (P-01 A/B) at 22.5 kW / 3000 RPM to the reactor unit. The tanks connect to a pipe network driven by vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM, pushing heating gases and vapors to the gas washing tank (V-14). 6. Reactor (Cooking) Unit (V-04 A/B) Consists of three reactors (55 tons each) that prepare the raw material for vacuum distillation and extract light naphtha compounds. • 6-1: Cooking Process: o 6-1-1: Catalyst System: Consists of two tanks. One prepares the catalyst mixture (1.5m dia, 4m H, 8mm carbon steel) with a mixer (MX-03) driven by a hydromotor and 1:40 gearbox. The second stores Gas Oil added to the preparation unit (1.5m dia, 1m H, 5mm carbon steel) with a 0.5 HP centrifugal pump. o 6-1-2: Reaction Tanks (V-04/05/06A): Three carbon steel tanks (2.8m dia, 9m L, 14mm thick, 55-ton max). Each has 2 Stainless Steel mixers (MX-02 A/B/C/D/E/F) driven by a 7.5 kW motor (1500 RPM) with a 1:40 gearbox. Contains an internal heating system powered by a Gas Oil burner to raise the temperature to 180°C. Catalyst is injected via dosing pumps (DP-01A/B) to increase naphtha extraction efficiency. Material is circulated during cooking by two centrifugal pumps per reactor (P-04A/B/C/D/E/F) (one active, one standby) to reduce retention time to 3-4 hours. After cooking, material is moved to the attached tank (V-04/05/06B) for storage before distillation. Fully insulated. o 6-1-3: Cooked Material Tank (V-04/05/06B): Carbon steel tank (2.8m dia, 9m L, 14mm thick) with thermal oil pipes to maintain 190-200°C. Fully insulated. Material is pumped to the vacuum distillation tower via centrifugal pumps (P-05A/B) (one active, one standby) at 22.5 kW / 3000 RPM. 7. Raw Naphtha Storage Unit Collects and condenses naphtha extracted during cooking. • 7-1-1: Raw Naphtha Tanks (V-07A/B/C): Three vertical Stainless Steel 304 tanks (1.5m dia, 5m H) connected to three heat exchangers and two pump pairs. Equipped internally with water spray nozzles on a ring pipe to wash non-condensable gases. • 7-1-2: Heat Exchangers (HE-01A/B/C): Condense naphtha vapors from 140°C down to 40°C using water from the cooling tower. Connected in series. Shell & Tube type, carbon steel (510 mm dia, 6m L) with 70 tubes (0.75-inch dia) in two rows of 35. Includes internal baffles for efficiency. • 7-1-3: Supporting Pumps: Vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM draw naphtha vapors from reactors to the heat exchangers, pushing non-condensable gases to the scrubber (V-14). Centrifugal pumps (P-02A/B) at 11.5 kW / 1500 RPM transport liquid raw naphtha to the Bleaching Unit. 8. Vacuum Distillation Unit The core of the plant, separating remaining light compounds and producing hard asphalt. • 8-1-1: Vacuum Distillation Tower: A vertical tower (~16m total height, 14mm carbon steel). Bottom section (Reboiler) is 3.5m dia x 1.2m H; top section is 1.5m dia x 12m H. Fully insulated. Fed with cooked material at 190-200°C via pumps (P-05A/B). To start extraction (remaining naphtha, Gas Oil, diesel), temperature is raised to 240-250°C using Heating Coil 1 via pumps (P-08A/B) at 55 kW / 3000 RPM, with continuous circulation via pumps (P-07A/B). Vacuum pumps (VP-03A/B) maintain 0.3-0.5 mbar pressure. Light compounds are extracted, condensed (HE-02A/B/C), and stored (V-08/09/10 A/B) over 2.5-3 hours. Afterward, material is heated via Heating Coil 2 to 320-340°C to finalize extraction and produce hard bitumen. Product is extracted via pumps (P-07A/B) at ~320°C, cooled via cooling tower coils, and sent to final tanks (V-18A/B/C). Batch processing takes 6-7 hours daily; continuous operation is possible. • 8-1-2: Supporting Pumps: Vacuum pumps (VP-03A/B) at 5.5 kW / 3000 RPM draw light vapors for condensation. Circulation centrifugal pumps (P-08A/B) at 55 kW move hot material to heating coils; (P-07A/B) circulate material and pump final bitumen product. • 8-1-3: Heating Coils 1 & 2: Carbon steel 4-inch diameter coils heated externally by a Gas Oil burner. Connected in series to heat liquid bitumen in two stages to prevent degradation. • 8-2: Heat Exchangers (HE-02A/B/C): Condense light compound vapors from 240°C to 40°C. Shell & Tube type, carbon steel (600 mm dia, 6m L) with 80 tubes (1-inch dia) in two rows of 40, equipped with baffles. • 8-3: Light Compound Tanks (V-08A/B, V-09A/B, V-10A/B): Six horizontal carbon steel tanks (1.5m dia, 4.5m L, 14mm thick). Receive condensates, linked to heat exchangers and vacuum pumps. Liquids are pumped to the Bleaching Unit via centrifugal pumps (P-06A/B) at 7.5 kW / 1500 RPM. 9. Bleaching Unit Improves the specifications of raw light compounds for local use and marketing. • 9-1: Collection Tank (V-11): Horizontal carbon steel tank (1m dia, 2.5m L, 14mm thick) placed above the system to store and distribute light compounds to the bleaching columns. • 9-2: Bleaching Columns (V-12A/B/C): Three vertical carbon steel vessels (1m dia, 4.5m H, 14mm thick). Contain a 15 cm catalyst layer on trays to bleach raw liquids into high-quality compounds, collected in a bottom horizontal tank. The catalyst is a calcined mixture of Bentonite and Zinc Oxide granules (2-3 mm) homogenized in water, which can be reactivated with steam and 5% HCl. • 9-3: Supporting Pumps: Vacuum pumps (VP-04A/B) at 5.5 kW extract vapors to the scrubber. Centrifugal pumps (P-09A/B) at 7.5 kW push bleached liquids to final tanks. 10. Production Tanks (V-13 A-F & V-18 A-C) • Light Products: Six horizontal carbon steel tanks (2.8m dia, 9m L, 55-ton capacity). V-13A/B for light naphtha, V-13C/D for Gas Oil, V-13E/F for diesel. • Asphalt: Three vertical carbon steel tanks (V-18A/B/C) (5m dia, 9m H). Equipped with thermal oil heating coils to keep asphalt liquid. Fully insulated (90 kg/m³ glass wool, 1.8mm aluminum cover). 11. Supporting Systems • 11-1: Gas Washing (Scrubber) System: Treats non-condensable gases before atmospheric release. Contains V-14 washing tank (1m dia, 2.8m L), a 500mm Flare stack with 3 ignitors, and a 1m x 1m LPG tank (V-15) for ignition. • 11-2: Cooling Tower: Provides cooling water for heat exchangers. Galvanized pressed steel basin (16m L x 2.4m W x 2.8m H), FRP casing, top fans, water distributors, and fill media. Includes Accumulator tank V-20 (1.5m dia, 2m L) and 11 kW pushing pumps (P-14A/B). • 11-3: Thermal Oil Boilers: Includes oil tank, heating boiler, oil pumps, and heating accelerators. • 11-4: Distillation Tower Raw Boilers • 11-5: Power Generation System • 11-6: Production Laboratory • 11-7: Control and Operation Room • 11-8: Catalyst System: Contains a vertical diesel tank (1m dia, 1.5m H) with a 1 kW centrifugal pump (P-11). Two vertical carbon steel tanks (V-17A/B, 1.5m dia, 4.5m H) with an MX-03 hydromotor mixer (7.5 kW, 30 RPM). V-17A is for preparation, V-17B pumps catalyst to the reactor. ________________________________________ Catalyst Chemical Components & Formulations 1. Alumina (Al2O3): Enhances the cracking of chemical bonds in heavy bitumen chains and increases Gas Oil extraction yield. 2. Manganese Dioxide (MnO2): Accelerates the reaction, reduces reaction time, and acts as a gasoline improver. 3. Silicon Dioxide (SiO2): Increases acceleration and reduces reaction time. 4. Iron Oxides (Fe2O): Accelerates the reaction, prevents pipe corrosion, and stops sulfur and wax from sticking to pipes and pumps. Weight Ratios (WT/WT) to Produce One Barrel (200 Liters) of Catalyst: 1. Alumina: Varies by feed: 2-2.5% for Bitumen / 4-5% for Vacuum Residue (VR) / 2-2.5% for Heavy Fuel Oil (HFO). To increase Gas Oil/Diesel (Light fuel) yield, Alumina can be added up to a maximum of 10%. 2. Manganese Dioxide: 2-2.5% for HFO / 4-5% for VR and Bitumen. 3. Iron Oxides: 2-2.5% across all feeds. 4. Silicon Dioxide: 2-2.5% for HFO / 4-5% for Bitumen and VR. 5. Remaining Volume: Filled with C-oil. Note: One barrel (200 Liters) of this mixture is added for every 5 tons of HFO, VR, or Bitumen. Manufacturing Mechanism: All components are placed in a tank, initially mixed with water, and heated to 80-120°C with continuous mixing (20-30 RPM). Once foam is generated, the product is allowed to cool to 80°C. The heating process up to 120°C is repeated 3 or 4 times until foaming ceases. Finally, the temperature is raised to 150°C, and the mixture is topped off to 200 liters using C-oil. To further improve light compound specifications, Zinc Oxide (300 grams) is mixed with 20 kg of Bentonite in C-oil. This is added alongside the catalyst at a ratio of 1/5 barrel of catalyst added to the reactor.
010
Hero
"Behold a marvel of design—an egg-shaped tent structure that emanates an ethereal glow, inviting you into its enchanting realm. Crafted from a lightweight aluminum framework, this innovative structure features flexible rods that bend and contour effortlessly. The framework forms a circular base and a smaller circle at the top, seamlessly connected by vertical rods that resemble the ribs of an egg. The entire ovoid structure is cloaked in a resilient fabric, specifically chosen for its suitability in tent and canopy construction. The fabric elegantly envelopes the entire surface of the egg-shaped tent, accentuating the seamless and organic form of the structure. Not a single curve or contour is left untouched, as the fabric adheres flawlessly to every edge and fold. The fabric embraces the tent with a gentle embrace, creating an alluring presence that emphasizes its resemblance to a magnificent hatching egg. Step through the grand entrance, and you will discover a world of tranquility and wonder. Inside, there is only emptiness, illuminated by a soft, ambient light that bathes the interior with a serene glow. The absence of physical objects accentuates the sense of spaciousness and invites a deep sense of introspection. The space becomes a sanctuary for personal reflection and connection with oneself. As you gaze upon this remarkable structure, it seamlessly integrates with the natural surroundings, becoming a harmonious element of the landscape. The fabric-covered egg-shaped tent stands as a testament to human ingenuity, offering a captivating and immersive experience. Its exterior showcases the gentle glow that emanates from within, captivating all who behold its beauty. The size of the tent, with its complete coverage and ovoid structure, is designed for a single occupant, providing an intimate and personal space for solace and reflection. The lightweight aluminum framework, meticulously designed, forms a circular base and a smaller circle at the top, with vertical rods extending from the upper ring to the lower one, connecting them to shape the rib-like structure of the egg. Step through the open entrance, and you will enter a sanctuary of serenity, where the only companions are the soft glow and the empty expanse. Allow the encompassing light and the tranquil haven to embrace you, as you embark on a journey of introspection and connection within the allure of this egg-shaped tent."
1127
DreamShaper
{ "prompt_type": "descriptive_replication", "reference_adherence": "STRICT_VISUAL_FIDELITY", "aspect_ratio": "4:5", "style": "1990s compact digital camera aesthetic with harsh on‑camera flash, grainy texture, washed‑out colors, high contrast, subtle chromatic aberration and halation. NO HDR, NO tone mapping, NO modern digital processing. The image looks like a raw, unedited flash photograph taken at night in a luxury modern interior (a penthouse or study), using an early digital point‑and‑shoot (e.g., Kodak DC series, Sony Mavica). The flash is the main light source – it creates deep, sharp shadows and overexposed highlights, the classic 'deer‑in‑headlights' effect. Background details are heavily darkened but faintly visible (dark wooden shelves, a leather chair, a window with city lights). Ultra‑realistic skin texture (on hands/arms), visible pores, fabric grain, metal reflections – all rendered with natural grain and no smoothing. The composition is slightly tilted, with a slight vertical banding artifact (CCD readout noise), a micro‑scratch on the lens (barely visible in lower right), and a subtle vignette with a faint greenish‑purple color shift at the edges – all adding authentic 90s digital camera character. The scene is dark, moody, powerful, with a raw, criminal‑luxury atmosphere.", "character": { "identity": "Wealthy mysterious man (Welison), early 30s, athletic build, broad shoulders, dominant posture. Bare chested (or wearing a black fitted t‑shirt?), but from previous descriptions often bare chested to show tattoo. However, holding a MacBook and money might be better with a black tactical top. But we can keep the bare chest / open jacket style. I'll make him wear a black ribbed sleeveless top (or bare chest with tactical trousers) to show the chest tattoo. Let's use a black sleeveless compression top to keep consistent with earlier 'tactical' look, but also allow the tattoo to be visible? Actually, the tattoo is on the upper chest – if he's holding items in both hands, his chest might be exposed. I'll describe him wearing a black tailored jacket (unbuttoned) or just bare chest? To avoid overcomplicating, I'll use a black fitted vest (tactical) that leaves arms and upper chest exposed, so the tattoo can be seen. Or simply bare chested with black trousers. Let's go with bare chested (as in many previous prompts) to show the tattoo.", "face_and_head": { "visibility": "completely obscured by a black ribbed balaclava (full‑face coverage, no openings) with a metallic silver‑grey embroidered Masonic pattern (all‑seeing eye, pyramid, geometric symbols). Over the balaclava, rectangular gold‑frame sunglasses (semi‑rimless, dark grey gradient lenses, Masonic logo on left lens)." }, "torso_and_tattoo": { "description": "Bare chest, slightly sweaty. Large tattoo on center chest in Chicano‑smoke style: dark clouds, swirling smoke, soft waves merging into skin. In the center, the word 'ШРЕДЕР' in a bold calligraphic brushstroke style with a thin white double outline, creating a subtle glow. Below the text, a Masonic pyramid with an all‑seeing eye and geometric symbols." }, "necklace": "Thick, heavy moissanite chain, Cuban link weave, spelling 'SHREDE1RR' with large letters, hanging onto bare chest.", "clothing": { "description": "Bare chested. Black tailored trousers (slim fit, low waist), black leather belt, barefoot or black shoes (not visible)." }, "hands_and_props": { "left_hand": "Holding a silver MacBook laptop (closed or slightly open? Preferably closed, held flat or at an angle). The MacBook screen is dark, the aluminum body reflects the flash with bright specular highlights.", "right_hand": "Holding a very thick stack of 50‑euro banknotes (approx. 10‑12 cm thick, tightly bound with a white or yellow rubber band). The notes are crisp, the flash catches the holograms and the edge details, euro symbol visible on the top note.", "pose": "Standing facing the camera directly, centered, slightly low angle. Arms slightly bent, holding both items at waist or chest level. The MacBook is held horizontally by the left hand (like a tray), the money stack is held vertically or slightly tilted in the right hand, showing the thickness. The pose is dominant, wealthy, controlling." } }, "environment": { "setting": "Luxury modern penthouse study at night. Dark wooden shelves with books and abstract sculptures, a large leather armchair in the background, a window revealing faint city lights (completely darkened by flash). The desk is polished black glass, barely visible. The atmosphere is opulent and secretive.", "background": { "description": "Very dark, almost black, with faint outlines of bookshelves and a window. A single dim light source (overpowered) but not visible. The flash creates a bright circular hotspot directly behind the subject, fading to black edges." } }, "lighting_and_atmosphere": { "source": "ON‑CAMERA FLASH ONLY (early 1990s compact digital camera). No other light sources. This is NOT HDR.", "quality": "extremely harsh, high contrast, overexposed highlights on the MacBook aluminum body, the white rubber band on the money, the gold sunglasses, the moissanite chain, and the specular highlights on the sweaty skin.", "effects": [ "strong, direct flash creating hard highlights on the MacBook casing (silver reflections), on the euro banknotes holograms, and on the glossy surfaces", "the white double outline of the tattoo reflects the flash with a faint glow", "background completely black – no details visible except faint outlines", "grainy texture typical of early digital compacts (heavy grain in shadows, fine grain in highlights)", "washed out colors, skin tones pale with a slight blue/green cast from the flash", "extremely high contrast – bright whites (MacBook, money edge) next to deep blacks", "subtle chromatic aberration (purple/green fringing) on high‑contrast edges (MacBook corners, sunglasses, banknotes edges)", "slight barrel distortion, lens flare (small circular artifacts from the flash)", "vertical banding artifact (CCD readout noise) visible in the dark background", "a micro‑scratch on the lens in the lower right corner", "subtle greenish‑purple vignette at the edges" ], "color_cast": "cool white balance (slightly blue/green), typical of early digital flashes. The MacBook silver appears with a cool tint, the money is pale greenish‑yellow, skin pale.", "contrast": "extremely high (maximum)" }, "camera_and_technical": { "perspective": "Straight‑on, eye level, centered composition. Medium shot (from mid‑chest to above head). Camera distance ~1.5‑2 m.", "camera_position": "handheld, compact digital camera from early 1990s (e.g., Kodak DC series, Sony Mavica), 35mm equivalent, fixed focus or autofocus with slight softness, aperture f/2.8‑f/4, shutter speed 1/60s, ISO 200‑400 with heavy grain.", "framing": "vertical 4:5, medium shot, subject perfectly centered, slight tilt (~2‑3°), a small intruding element (a strap or finger) in the upper left corner, a micro‑scratch on the lens in lower right.", "focus": "slightly soft, typical of flash photography, the face (mask) and the items (MacBook, money) are relatively sharp, background out of focus and black.", "visual_fidelity": "grainy, low resolution aesthetic, harsh flash, no HDR, no tone mapping, ultra high quality real image (realistic because of imperfections), candid snapshot with authentic 1990s compact camera feel." }, "realism_constraints": { "allowed": [ "grain", "washed out colors", "overexposed highlights", "harsh shadows with no detail", "pitch black background", "imperfect composition (slight tilt, intruding element, lens micro‑scratch, vertical banding, vignette)", "natural skin texture on arms and chest (pores, sweat beads, muscle)", "visible carbon fiber weave (mask), aluminum texture (MacBook), paper texture (money)", "chromatic aberration", "barrel distortion", "lens flare" ], "forbidden": [ "HDR", "tone mapping", "dynamic range compression", "lifted shadows", "detail in shadows", "soft lighting", "multiple light sources", "fill light", "ambient light visible (except faint outlines)", "even exposure", "balanced lighting", "modern digital perfection", "sharp focus (clinical)", "perfect composition", "cinematic look", "8k", "masterpiece", "airbrushed skin", "plastic skin", "CGI", "3d render", "stylized", "smartphone HDR", "deep fusion", "smart HDR", "visible brand logos (except Apple on MacBook? that's fine but we can ignore)", "any facial features visible through mask", "skin on face or neck", "matte plastic mask" ] }, "negative_prompt": [ "different character", "face visible", "facial features", "eyes visible", "mouth visible", "skin on face", "skin on neck", "beauty filters", "airbrushed skin", "anime", "cartoon", "over-sharpening", "clean digital look", "perfect exposure", "smooth gradients", "messy appearance", "greasy skin", "overexposed (beyond intended aesthetic)", "HDR", "tone mapping", "dynamic range", "lifted shadows", "detail in shadows", "soft lighting", "fill light", "ambient light", "even exposure", "balanced lighting", "CGI", "3d render", "plastic texture (except carbon fiber mask)", "smooth", "airbrushed", "digital art", "painting", "deformed hands", "extra fingers", "missing fingers", "blurry (beyond intentional soft focus)", "low detail", "unrealistic proportions", "bad anatomy", "watermark", "signature", "professional photography", "studio lighting (modern softbox)", "sharp focus (clinical)", "perfect composition", "cinematic (modern)", "8k", "masterpiece", "stylized", "modern digital", "natural light (flash must dominate)", "golden hour", "teal and orange", "warm tones", "iPhone", "LED flash (only 1990s compact camera flash)", "modern smartphone", "daylight", "no flash look", "bright background", "detailed background", "left hand not holding MacBook", "right hand not holding money", "MacBook open", "money scattered" ] }
09
Nano Banana
"Behold a marvel of design—an egg-shaped tent structure that emanates an ethereal glow, inviting you into its enchanting realm. Crafted from a lightweight aluminum framework, this innovative structure features flexible rods that bend and contour effortlessly. The framework forms a circular base and a smaller circle at the top, seamlessly connected by vertical rods that resemble the ribs of an egg. The entire ovoid structure is cloaked in a resilient fabric, specifically chosen for its suitability in tent and canopy construction. The fabric elegantly envelopes the entire surface of the egg-shaped tent, accentuating the seamless and organic form of the structure. Not a single curve or contour is left untouched, as the fabric adheres flawlessly to every edge and fold. The fabric embraces the tent with a gentle embrace, creating an alluring presence that emphasizes its resemblance to a magnificent hatching egg. Step through the grand entrance, and you will discover a world of tranquility and wonder. Inside, there is only emptiness, illuminated by a soft, ambient light that bathes the interior with a serene glow. The absence of physical objects accentuates the sense of spaciousness and invites a deep sense of introspection. The space becomes a sanctuary for personal reflection and connection with oneself. As you gaze upon this remarkable structure, it seamlessly integrates with the natural surroundings, becoming a harmonious element of the landscape. The fabric-covered egg-shaped tent stands as a testament to human ingenuity, offering a captivating and immersive experience. Its exterior showcases the gentle glow that emanates from within, captivating all who behold its beauty. The size of the tent, with its complete coverage and ovoid structure, is designed for a single occupant, providing an intimate and personal space for solace and reflection. The lightweight aluminum framework, meticulously designed, forms a circular base and a smaller circle at the top, with vertical rods extending from the upper ring to the lower one, connecting them to shape the rib-like structure of the egg. Step through the open entrance, and you will enter a sanctuary of serenity, where the only companions are the soft glow and the empty expanse. Allow the encompassing light and the tranquil haven to embrace you, as you embark on a journey of introspection and connection within the allure of this egg-shaped tent."
0117
DreamShaper
"Behold a marvel of design—an egg-shaped tent structure that emanates an ethereal glow, inviting you into its enchanting realm. Crafted from a lightweight aluminum framework, this innovative structure features flexible rods that bend and contour effortlessly. The framework forms a circular base and a smaller circle at the top, seamlessly connected by vertical rods that resemble the ribs of an egg. The entire ovoid structure is cloaked in a resilient fabric, specifically chosen for its suitability in tent and canopy construction. The fabric elegantly envelopes the entire surface of the egg-shaped tent, accentuating the seamless and organic form of the structure. Not a single curve or contour is left untouched, as the fabric adheres flawlessly to every edge and fold. The fabric embraces the tent with a gentle embrace, creating an alluring presence that emphasizes its resemblance to a magnificent hatching egg. Step through the grand entrance, and you will discover a world of tranquility and wonder. Inside, there is only emptiness, illuminated by a soft, ambient light that bathes the interior with a serene glow. The absence of physical objects accentuates the sense of spaciousness and invites a deep sense of introspection. The space becomes a sanctuary for personal reflection and connection with oneself. As you gaze upon this remarkable structure, it seamlessly integrates with the natural surroundings, becoming a harmonious element of the landscape. The fabric-covered egg-shaped tent stands as a testament to human ingenuity, offering a captivating and immersive experience. Its exterior showcases the gentle glow that emanates from within, captivating all who behold its beauty. The size of the tent, with its complete coverage and ovoid structure, is designed for a single occupant, providing an intimate and personal space for solace and reflection. The lightweight aluminum framework, meticulously designed, forms a circular base and a smaller circle at the top, with vertical rods extending from the upper ring to the lower one, connecting them to shape the rib-like structure of the egg. Step through the open entrance, and you will enter a sanctuary of serenity, where the only companions are the soft glow and the empty expanse. Allow the encompassing light and the tranquil haven to embrace you, as you embark on a journey of introspection and connection within the allure of this egg-shaped tent."
0104
DreamShaper
"Behold a marvel of design—an egg-shaped tent structure that emanates an ethereal glow, inviting you into its enchanting realm. Crafted from a lightweight aluminum framework, this innovative structure features flexible rods that bend and contour effortlessly. The framework forms a circular base and a smaller circle at the top, seamlessly connected by vertical rods that resemble the ribs of an egg. The entire ovoid structure is cloaked in a resilient fabric, specifically chosen for its suitability in tent and canopy construction. The fabric elegantly envelopes the entire surface of the egg-shaped tent, accentuating the seamless and organic form of the structure. Not a single curve or contour is left untouched, as the fabric adheres flawlessly to every edge and fold. The fabric embraces the tent with a gentle embrace, creating an alluring presence that emphasizes its resemblance to a magnificent hatching egg. Step through the grand entrance, and you will discover a world of tranquility and wonder. Inside, there is only emptiness, illuminated by a soft, ambient light that bathes the interior with a serene glow. The absence of physical objects accentuates the sense of spaciousness and invites a deep sense of introspection. The space becomes a sanctuary for personal reflection and connection with oneself. As you gaze upon this remarkable structure, it seamlessly integrates with the natural surroundings, becoming a harmonious element of the landscape. The fabric-covered egg-shaped tent stands as a testament to human ingenuity, offering a captivating and immersive experience. Its exterior showcases the gentle glow that emanates from within, captivating all who behold its beauty. The size of the tent, with its complete coverage and ovoid structure, is designed for a single occupant, providing an intimate and personal space for solace and reflection. The lightweight aluminum framework, meticulously designed, forms a circular base and a smaller circle at the top, with vertical rods extending from the upper ring to the lower one, connecting them to shape the rib-like structure of the egg. Step through the open entrance, and you will enter a sanctuary of serenity, where the only companions are the soft glow and the empty expanse. Allow the encompassing light and the tranquil haven to embrace you, as you embark on a journey of introspection and connection within the allure of this egg-shaped tent."
095
DreamShaper
"Behold a marvel of design—an egg-shaped tent structure that emanates an ethereal glow, inviting you into its enchanting realm. Crafted from a lightweight aluminum framework, this innovative structure features flexible rods that bend and contour effortlessly. The framework forms a circular base and a smaller circle at the top, seamlessly connected by vertical rods that resemble the ribs of an egg. The entire ovoid structure is cloaked in a resilient fabric, specifically chosen for its suitability in tent and canopy construction. The fabric elegantly envelopes the entire surface of the egg-shaped tent, accentuating the seamless and organic form of the structure. Not a single curve or contour is left untouched, as the fabric adheres flawlessly to every edge and fold. The fabric embraces the tent with a gentle embrace, creating an alluring presence that emphasizes its resemblance to a magnificent hatching egg. Step through the grand entrance, and you will discover a world of tranquility and wonder. Inside, there is only emptiness, illuminated by a soft, ambient light that bathes the interior with a serene glow. The absence of physical objects accentuates the sense of spaciousness and invites a deep sense of introspection. The space becomes a sanctuary for personal reflection and connection with oneself. As you gaze upon this remarkable structure, it seamlessly integrates with the natural surroundings, becoming a harmonious element of the landscape. The fabric-covered egg-shaped tent stands as a testament to human ingenuity, offering a captivating and immersive experience. Its exterior showcases the gentle glow that emanates from within, captivating all who behold its beauty. The size of the tent, with its complete coverage and ovoid structure, is designed for a single occupant, providing an intimate and personal space for solace and reflection. The lightweight aluminum framework, meticulously designed, forms a circular base and a smaller circle at the top, with vertical rods extending from the upper ring to the lower one, connecting them to shape the rib-like structure of the egg. Step through the open entrance, and you will enter a sanctuary of serenity, where the only companions are the soft glow and the empty expanse. Allow the encompassing light and the tranquil haven to embrace you, as you embark on a journey of introspection and connection within the allure of this egg-shaped tent."
089
DreamShaper
generate this business card: Layout 1: Modern Minimalist Colors: Primarily Atlantic Blue and Aluminum Snow. Layout:Left Side: Professional headshot in a circular or square frame. Right Side:Company Name: "SAFETY COMPLIANCE PROS" in bold, sans-serif font. Personal Name in a slightly smaller, sans-serif font. Contact information icons aligned vertically: Email icon Phone icon Location icon Geometric Corner Shape: A geometric shape in Aluminum Snow, placed at the top right corner of the card.
081
FLUX
generate this business card: Layout 1: Modern Minimalist Colors: Primarily Atlantic Blue and Aluminum Snow. Layout:Left Side: Professional headshot in a circular or square frame. Right Side:Company Name: "SAFETY COMPLIANCE PROS" in bold, sans-serif font. Personal Name in a slightly smaller, sans-serif font. Contact information icons aligned vertically:Email icon Phone icon Location icon Geometric Corner Shape: A subtle, minimalist geometric shape in Aluminum Snow, placed at the top right corner of the card.
057
FLUX
generate this business card: Layout 1: Modern Minimalist Colors: Primarily Atlantic Blue and Aluminum Snow. Layout:Left Side: Professional headshot in a circular or square frame. Right Side:Company Name: "SAFETY COMPLIANCE PROS" in bold, sans-serif font. Personal Name in a slightly smaller, sans-serif font. Contact information icons aligned vertically:Email icon Phone icon Location icon Geometric Corner Shape: A subtle, minimalist geometric shape in Aluminum Snow, placed at the top right corner of the card.
044
FLUX
A massive sheet of aluminum, very thin, wide, and long, is being compressed between two large industrial metal rollers. The rollers apply intense pressure, slightly deforming the sheet to make it perfectly flat. The setting is a modern metal processing factory, with light reflections on the shiny aluminum and detailed mechanical features on the rollers. The scene is shown from a slightly angled side perspective, with industrial lighting.
050
FLUX
Specialized Bitumen Refining Plant Governorate: Anbar / Hit District Production Capacity: ( ) Tons/Day The city of Hit in the Anbar Governorate is considered one of the most famous areas in the world for its natural "bitumen springs," which have been used for thousands of years (dating back to the Babylonian and Assyrian eras). However, processing this bitumen for modern use requires technical steps to transform it from a raw material into a viable product for construction or industrial applications. Bitumen emerges from these springs as a highly viscous liquid mixed with sulfurous water, salts, and mud impurities. This "Natural Asphalt" differs from petroleum bitumen produced in refineries, and it can also appear in the form of rocky or spongy blocks mixed with mud. To obtain industrially usable products from this bitumen, specifically for: 1. Waterproofing (Felt/Membranes): Considered one of the best coating materials for building foundations to prevent moisture leakage due to its high resistance to hydrolysis. 2. Road Paving: Mixed with gravel and sand to produce asphalt concrete. It is characterized by exceptionally high cohesive strength compared to industrial bitumen. The natural bitumen from these springs must undergo several fundamental processing stages to become industrially viable: 1. Collection and Sedimentation: Bitumen is collected from the springs or quarry sites and left in designated basins to allow the sulfurous water to naturally separate (due to density differences). 2. Primary Heating: The raw bitumen is placed in large boilers to: a. Evaporate the remaining water. b. Reduce viscosity for easier handling. 3. Filtration and Purification: The heated bitumen is screened to remove solid impurities such as gravel, dirt, and suspended organic matter. 4. Secondary Heating and Cooking: The temperature of the bitumen is raised, improving agents are added, and it is prepared for the vacuum distillation process. 5. Vacuum Distillation: The distillation process is conducted under low pressure (vacuum pressure), which allows for: a. The separation of light oils and volatile substances at lower temperatures. b. The production of highly pure "Hard Asphalt," which is highly demanded in the construction industry. ________________________________________ Plant Components and Operational Stages The specialized bitumen plant for processing raw natural bitumen (in both liquid and solid states) consists of a range of specialized equipment designed according to the latest international standards. This equipment aligns with the technical and engineering requirements for bitumen products, complies with Iraqi standard specifications, and adheres to environmental considerations in the Anbar Governorate. 1. Extraction Stage The raw material (solid or liquid) is extracted from quarries designated by the Geological Survey Authority using specialized mechanical equipment. It is stored in stocks or special basins for solid materials, then transported to the refinery site using specialized transport vehicles of various capacities. 2. Storage Stage The raw materials are stored in designated yards to ensure a sufficient inventory for continuous, uninterrupted production for no less than 7 working days. 3. Raw Material Preparation and Primary Heating Stage Raw materials are fed into the plant via hydraulic lifts. This stage includes: • 3-1: Crushing and Digestion: Solid raw materials from the quarries are broken down and digested using a digester (SH-01) equipped with double blades driven by hydraulic motors (22.5 kW capacity). The digester is 5 meters long and 1.80 meters in diameter, made of carbon steel, with Stainless Steel 304 blades. It includes a Stainless Steel piston driven by a 7.5 kW electric motor. • 3-2: Primary Heating: This melts the bitumen and improves pumpability through pipes and pumps. • 3-3: Efficiency Enhancement: To increase melting efficiency, Gas Oil is added to the primary heating basin at a ratio of 1:5 per ton of solid raw material entering the basin (this ratio decreases when using liquid raw bitumen). o 3-2-1: Primary Melting Basin (TK-01): Raw material is heated in a concrete tank (25m L x 5m W x 3m H) with a maximum storage capacity of 300 tons. Heating pipes circulate thermal fluid (oil) at 125°C, with a retention time of 4-6 hours. The tank is internally lined with 6-8 mm carbon steel plates to protect the heating pipes from corrosion. It contains 8 Stainless Steel 304 mixers (MX-01 A/B/C/D/E/F) driven by 7.5 kW electric motors (50 RPM) and gearboxes (1:60 ratio) to mix the material, increase heating efficiency, reduce retention time, and circulate the melted bitumen to eliminate dissolved water, resulting in a homogeneous melt. Covered with a carbon steel roof with service hatches, it connects to an air duct (30x60 cm) linked to 2 air blowers (AB-01A/B) (one operating, one standby) at 22.5 kW / 1500 RPM. These extract water vapor and sulfur fumes, sending them to a scrubber before atmospheric release and water recycling. o 3-2-2: Primary Collection Tank (V-01): A carbon steel tank (12-14 mm thick) with a maximum capacity of 125 tons (10m L x 5m W x 3m H). It connects directly to the primary tank (TK-01) via channels and movable gates to receive only liquid raw material. It contains thermal oil pipes to maintain the liquid raw material at 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum outer cover. Impurities larger than 35 mm are removed and collected in a waste tank. o 3-2-3: Screw Conveyors (SC-01 A/B): Carbon steel screw conveyors with a double-jacketed outer cover filled with thermal oil to maintain the 140°C temperature. Driven by 22.5 kW electric motors (3000 RPM) with 1:40 gearboxes, they transport the liquid raw material to the preliminary filtration unit. 4. Purification Unit Removes suspended impurities from the liquid raw material in two stages: • 4-1: Preliminary Purification Tank (V-02): A carbon steel tank (12-14 mm thick, 125-ton capacity, 5m L x 10m W x 3m H). Receives liquid raw material from the primary collection tank. Contains thermal oil pipes to maintain 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Impurities larger than 15 mm are removed to a waste tank. Material is pumped to the final filtration stage via gear pumps (GP-01 A/B) (one operating, one standby) at 22.5 kW / 1000 RPM. • 4-2: Final Filtration Unit (FT-01): Removes remaining impurities by passing liquids through box filters arranged in 2 trains (8 per train). They feature a two-layer Stainless Steel filter mesh (specified microns) wrapped around square boxes. Liquid enters from the outside, and pure liquid is collected from the inside via a pipe network connected to a manifold. This is driven by two vacuum pumps (VP-01A/B) connected to the raw material tanks. 5. Raw Material Tanks (V-03 A-J) Ten carbon steel tanks (2.5m diameter, 9m length, 14 mm thickness, 45-ton max capacity) equipped with thermal oil heating coils. They receive, store, and prepare the purified raw material for the subsequent cooking reaction. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Connected by a pipe/valve network, the material is pumped via two centrifugal pumps (P-01 A/B) at 22.5 kW / 3000 RPM to the reactor unit. The tanks connect to a pipe network driven by vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM, pushing heating gases and vapors to the gas washing tank (V-14). 6. Reactor (Cooking) Unit (V-04 A/B) Consists of three reactors (55 tons each) that prepare the raw material for vacuum distillation and extract light naphtha compounds. • 6-1: Cooking Process: o 6-1-1: Catalyst System: Consists of two tanks. One prepares the catalyst mixture (1.5m dia, 4m H, 8mm carbon steel) with a mixer (MX-03) driven by a hydromotor and 1:40 gearbox. The second stores Gas Oil added to the preparation unit (1.5m dia, 1m H, 5mm carbon steel) with a 0.5 HP centrifugal pump. o 6-1-2: Reaction Tanks (V-04/05/06A): Three carbon steel tanks (2.8m dia, 9m L, 14mm thick, 55-ton max). Each has 2 Stainless Steel mixers (MX-02 A/B/C/D/E/F) driven by a 7.5 kW motor (1500 RPM) with a 1:40 gearbox. Contains an internal heating system powered by a Gas Oil burner to raise the temperature to 180°C. Catalyst is injected via dosing pumps (DP-01A/B) to increase naphtha extraction efficiency. Material is circulated during cooking by two centrifugal pumps per reactor (P-04A/B/C/D/E/F) (one active, one standby) to reduce retention time to 3-4 hours. After cooking, material is moved to the attached tank (V-04/05/06B) for storage before distillation. Fully insulated. o 6-1-3: Cooked Material Tank (V-04/05/06B): Carbon steel tank (2.8m dia, 9m L, 14mm thick) with thermal oil pipes to maintain 190-200°C. Fully insulated. Material is pumped to the vacuum distillation tower via centrifugal pumps (P-05A/B) (one active, one standby) at 22.5 kW / 3000 RPM. 7. Raw Naphtha Storage Unit Collects and condenses naphtha extracted during cooking. • 7-1-1: Raw Naphtha Tanks (V-07A/B/C): Three vertical Stainless Steel 304 tanks (1.5m dia, 5m H) connected to three heat exchangers and two pump pairs. Equipped internally with water spray nozzles on a ring pipe to wash non-condensable gases. • 7-1-2: Heat Exchangers (HE-01A/B/C): Condense naphtha vapors from 140°C down to 40°C using water from the cooling tower. Connected in series. Shell & Tube type, carbon steel (510 mm dia, 6m L) with 70 tubes (0.75-inch dia) in two rows of 35. Includes internal baffles for efficiency. • 7-1-3: Supporting Pumps: Vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM draw naphtha vapors from reactors to the heat exchangers, pushing non-condensable gases to the scrubber (V-14). Centrifugal pumps (P-02A/B) at 11.5 kW / 1500 RPM transport liquid raw naphtha to the Bleaching Unit. 8. Vacuum Distillation Unit The core of the plant, separating remaining light compounds and producing hard asphalt. • 8-1-1: Vacuum Distillation Tower: A vertical tower (~16m total height, 14mm carbon steel). Bottom section (Reboiler) is 3.5m dia x 1.2m H; top section is 1.5m dia x 12m H. Fully insulated. Fed with cooked material at 190-200°C via pumps (P-05A/B). To start extraction (remaining naphtha, Gas Oil, diesel), temperature is raised to 240-250°C using Heating Coil 1 via pumps (P-08A/B) at 55 kW / 3000 RPM, with continuous circulation via pumps (P-07A/B). Vacuum pumps (VP-03A/B) maintain 0.3-0.5 mbar pressure. Light compounds are extracted, condensed (HE-02A/B/C), and stored (V-08/09/10 A/B) over 2.5-3 hours. Afterward, material is heated via Heating Coil 2 to 320-340°C to finalize extraction and produce hard bitumen. Product is extracted via pumps (P-07A/B) at ~320°C, cooled via cooling tower coils, and sent to final tanks (V-18A/B/C). Batch processing takes 6-7 hours daily; continuous operation is possible. • 8-1-2: Supporting Pumps: Vacuum pumps (VP-03A/B) at 5.5 kW / 3000 RPM draw light vapors for condensation. Circulation centrifugal pumps (P-08A/B) at 55 kW move hot material to heating coils; (P-07A/B) circulate material and pump final bitumen product. • 8-1-3: Heating Coils 1 & 2: Carbon steel 4-inch diameter coils heated externally by a Gas Oil burner. Connected in series to heat liquid bitumen in two stages to prevent degradation. • 8-2: Heat Exchangers (HE-02A/B/C): Condense light compound vapors from 240°C to 40°C. Shell & Tube type, carbon steel (600 mm dia, 6m L) with 80 tubes (1-inch dia) in two rows of 40, equipped with baffles. • 8-3: Light Compound Tanks (V-08A/B, V-09A/B, V-10A/B): Six horizontal carbon steel tanks (1.5m dia, 4.5m L, 14mm thick). Receive condensates, linked to heat exchangers and vacuum pumps. Liquids are pumped to the Bleaching Unit via centrifugal pumps (P-06A/B) at 7.5 kW / 1500 RPM. 9. Bleaching Unit Improves the specifications of raw light compounds for local use and marketing. • 9-1: Collection Tank (V-11): Horizontal carbon steel tank (1m dia, 2.5m L, 14mm thick) placed above the system to store and distribute light compounds to the bleaching columns. • 9-2: Bleaching Columns (V-12A/B/C): Three vertical carbon steel vessels (1m dia, 4.5m H, 14mm thick). Contain a 15 cm catalyst layer on trays to bleach raw liquids into high-quality compounds, collected in a bottom horizontal tank. The catalyst is a calcined mixture of Bentonite and Zinc Oxide granules (2-3 mm) homogenized in water, which can be reactivated with steam and 5% HCl. • 9-3: Supporting Pumps: Vacuum pumps (VP-04A/B) at 5.5 kW extract vapors to the scrubber. Centrifugal pumps (P-09A/B) at 7.5 kW push bleached liquids to final tanks. 10. Production Tanks (V-13 A-F & V-18 A-C) • Light Products: Six horizontal carbon steel tanks (2.8m dia, 9m L, 55-ton capacity). V-13A/B for light naphtha, V-13C/D for Gas Oil, V-13E/F for diesel. • Asphalt: Three vertical carbon steel tanks (V-18A/B/C) (5m dia, 9m H). Equipped with thermal oil heating coils to keep asphalt liquid. Fully insulated (90 kg/m³ glass wool, 1.8mm aluminum cover). 11. Supporting Systems • 11-1: Gas Washing (Scrubber) System: Treats non-condensable gases before atmospheric release. Contains V-14 washing tank (1m dia, 2.8m L), a 500mm Flare stack with 3 ignitors, and a 1m x 1m LPG tank (V-15) for ignition. • 11-2: Cooling Tower: Provides cooling water for heat exchangers. Galvanized pressed steel basin (16m L x 2.4m W x 2.8m H), FRP casing, top fans, water distributors, and fill media. Includes Accumulator tank V-20 (1.5m dia, 2m L) and 11 kW pushing pumps (P-14A/B). • 11-3: Thermal Oil Boilers: Includes oil tank, heating boiler, oil pumps, and heating accelerators. • 11-4: Distillation Tower Raw Boilers • 11-5: Power Generation System • 11-6: Production Laboratory • 11-7: Control and Operation Room • 11-8: Catalyst System: Contains a vertical diesel tank (1m dia, 1.5m H) with a 1 kW centrifugal pump (P-11). Two vertical carbon steel tanks (V-17A/B, 1.5m dia, 4.5m H) with an MX-03 hydromotor mixer (7.5 kW, 30 RPM). V-17A is for preparation, V-17B pumps catalyst to the reactor. ________________________________________ Catalyst Chemical Components & Formulations 1. Alumina (Al2O3): Enhances the cracking of chemical bonds in heavy bitumen chains and increases Gas Oil extraction yield. 2. Manganese Dioxide (MnO2): Accelerates the reaction, reduces reaction time, and acts as a gasoline improver. 3. Silicon Dioxide (SiO2): Increases acceleration and reduces reaction time. 4. Iron Oxides (Fe2O): Accelerates the reaction, prevents pipe corrosion, and stops sulfur and wax from sticking to pipes and pumps. Weight Ratios (WT/WT) to Produce One Barrel (200 Liters) of Catalyst: 1. Alumina: Varies by feed: 2-2.5% for Bitumen / 4-5% for Vacuum Residue (VR) / 2-2.5% for Heavy Fuel Oil (HFO). To increase Gas Oil/Diesel (Light fuel) yield, Alumina can be added up to a maximum of 10%. 2. Manganese Dioxide: 2-2.5% for HFO / 4-5% for VR and Bitumen. 3. Iron Oxides: 2-2.5% across all feeds. 4. Silicon Dioxide: 2-2.5% for HFO / 4-5% for Bitumen and VR. 5. Remaining Volume: Filled with C-oil. Note: One barrel (200 Liters) of this mixture is added for every 5 tons of HFO, VR, or Bitumen. Manufacturing Mechanism: All components are placed in a tank, initially mixed with water, and heated to 80-120°C with continuous mixing (20-30 RPM). Once foam is generated, the product is allowed to cool to 80°C. The heating process up to 120°C is repeated 3 or 4 times until foaming ceases. Finally, the temperature is raised to 150°C, and the mixture is topped off to 200 liters using C-oil. To further improve light compound specifications, Zinc Oxide (300 grams) is mixed with 20 kg of Bentonite in C-oil. This is added alongside the catalyst at a ratio of 1/5 barrel of catalyst added to the reactor.
015
Hero
Specialized Bitumen Refining Plant Governorate: Anbar / Hit District Production Capacity: ( ) Tons/Day The city of Hit in the Anbar Governorate is considered one of the most famous areas in the world for its natural "bitumen springs," which have been used for thousands of years (dating back to the Babylonian and Assyrian eras). However, processing this bitumen for modern use requires technical steps to transform it from a raw material into a viable product for construction or industrial applications. Bitumen emerges from these springs as a highly viscous liquid mixed with sulfurous water, salts, and mud impurities. This "Natural Asphalt" differs from petroleum bitumen produced in refineries, and it can also appear in the form of rocky or spongy blocks mixed with mud. To obtain industrially usable products from this bitumen, specifically for: 1. Waterproofing (Felt/Membranes): Considered one of the best coating materials for building foundations to prevent moisture leakage due to its high resistance to hydrolysis. 2. Road Paving: Mixed with gravel and sand to produce asphalt concrete. It is characterized by exceptionally high cohesive strength compared to industrial bitumen. The natural bitumen from these springs must undergo several fundamental processing stages to become industrially viable: 1. Collection and Sedimentation: Bitumen is collected from the springs or quarry sites and left in designated basins to allow the sulfurous water to naturally separate (due to density differences). 2. Primary Heating: The raw bitumen is placed in large boilers to: a. Evaporate the remaining water. b. Reduce viscosity for easier handling. 3. Filtration and Purification: The heated bitumen is screened to remove solid impurities such as gravel, dirt, and suspended organic matter. 4. Secondary Heating and Cooking: The temperature of the bitumen is raised, improving agents are added, and it is prepared for the vacuum distillation process. 5. Vacuum Distillation: The distillation process is conducted under low pressure (vacuum pressure), which allows for: a. The separation of light oils and volatile substances at lower temperatures. b. The production of highly pure "Hard Asphalt," which is highly demanded in the construction industry. ________________________________________ Plant Components and Operational Stages The specialized bitumen plant for processing raw natural bitumen (in both liquid and solid states) consists of a range of specialized equipment designed according to the latest international standards. This equipment aligns with the technical and engineering requirements for bitumen products, complies with Iraqi standard specifications, and adheres to environmental considerations in the Anbar Governorate. 1. Extraction Stage The raw material (solid or liquid) is extracted from quarries designated by the Geological Survey Authority using specialized mechanical equipment. It is stored in stocks or special basins for solid materials, then transported to the refinery site using specialized transport vehicles of various capacities. 2. Storage Stage The raw materials are stored in designated yards to ensure a sufficient inventory for continuous, uninterrupted production for no less than 7 working days. 3. Raw Material Preparation and Primary Heating Stage Raw materials are fed into the plant via hydraulic lifts. This stage includes: • 3-1: Crushing and Digestion: Solid raw materials from the quarries are broken down and digested using a digester (SH-01) equipped with double blades driven by hydraulic motors (22.5 kW capacity). The digester is 5 meters long and 1.80 meters in diameter, made of carbon steel, with Stainless Steel 304 blades. It includes a Stainless Steel piston driven by a 7.5 kW electric motor. • 3-2: Primary Heating: This melts the bitumen and improves pumpability through pipes and pumps. • 3-3: Efficiency Enhancement: To increase melting efficiency, Gas Oil is added to the primary heating basin at a ratio of 1:5 per ton of solid raw material entering the basin (this ratio decreases when using liquid raw bitumen). o 3-2-1: Primary Melting Basin (TK-01): Raw material is heated in a concrete tank (25m L x 5m W x 3m H) with a maximum storage capacity of 300 tons. Heating pipes circulate thermal fluid (oil) at 125°C, with a retention time of 4-6 hours. The tank is internally lined with 6-8 mm carbon steel plates to protect the heating pipes from corrosion. It contains 8 Stainless Steel 304 mixers (MX-01 A/B/C/D/E/F) driven by 7.5 kW electric motors (50 RPM) and gearboxes (1:60 ratio) to mix the material, increase heating efficiency, reduce retention time, and circulate the melted bitumen to eliminate dissolved water, resulting in a homogeneous melt. Covered with a carbon steel roof with service hatches, it connects to an air duct (30x60 cm) linked to 2 air blowers (AB-01A/B) (one operating, one standby) at 22.5 kW / 1500 RPM. These extract water vapor and sulfur fumes, sending them to a scrubber before atmospheric release and water recycling. o 3-2-2: Primary Collection Tank (V-01): A carbon steel tank (12-14 mm thick) with a maximum capacity of 125 tons (10m L x 5m W x 3m H). It connects directly to the primary tank (TK-01) via channels and movable gates to receive only liquid raw material. It contains thermal oil pipes to maintain the liquid raw material at 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum outer cover. Impurities larger than 35 mm are removed and collected in a waste tank. o 3-2-3: Screw Conveyors (SC-01 A/B): Carbon steel screw conveyors with a double-jacketed outer cover filled with thermal oil to maintain the 140°C temperature. Driven by 22.5 kW electric motors (3000 RPM) with 1:40 gearboxes, they transport the liquid raw material to the preliminary filtration unit. 4. Purification Unit Removes suspended impurities from the liquid raw material in two stages: • 4-1: Preliminary Purification Tank (V-02): A carbon steel tank (12-14 mm thick, 125-ton capacity, 5m L x 10m W x 3m H). Receives liquid raw material from the primary collection tank. Contains thermal oil pipes to maintain 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Impurities larger than 15 mm are removed to a waste tank. Material is pumped to the final filtration stage via gear pumps (GP-01 A/B) (one operating, one standby) at 22.5 kW / 1000 RPM. • 4-2: Final Filtration Unit (FT-01): Removes remaining impurities by passing liquids through box filters arranged in 2 trains (8 per train). They feature a two-layer Stainless Steel filter mesh (specified microns) wrapped around square boxes. Liquid enters from the outside, and pure liquid is collected from the inside via a pipe network connected to a manifold. This is driven by two vacuum pumps (VP-01A/B) connected to the raw material tanks. 5. Raw Material Tanks (V-03 A-J) Ten carbon steel tanks (2.5m diameter, 9m length, 14 mm thickness, 45-ton max capacity) equipped with thermal oil heating coils. They receive, store, and prepare the purified raw material for the subsequent cooking reaction. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Connected by a pipe/valve network, the material is pumped via two centrifugal pumps (P-01 A/B) at 22.5 kW / 3000 RPM to the reactor unit. The tanks connect to a pipe network driven by vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM, pushing heating gases and vapors to the gas washing tank (V-14). 6. Reactor (Cooking) Unit (V-04 A/B) Consists of three reactors (55 tons each) that prepare the raw material for vacuum distillation and extract light naphtha compounds. • 6-1: Cooking Process: o 6-1-1: Catalyst System: Consists of two tanks. One prepares the catalyst mixture (1.5m dia, 4m H, 8mm carbon steel) with a mixer (MX-03) driven by a hydromotor and 1:40 gearbox. The second stores Gas Oil added to the preparation unit (1.5m dia, 1m H, 5mm carbon steel) with a 0.5 HP centrifugal pump. o 6-1-2: Reaction Tanks (V-04/05/06A): Three carbon steel tanks (2.8m dia, 9m L, 14mm thick, 55-ton max). Each has 2 Stainless Steel mixers (MX-02 A/B/C/D/E/F) driven by a 7.5 kW motor (1500 RPM) with a 1:40 gearbox. Contains an internal heating system powered by a Gas Oil burner to raise the temperature to 180°C. Catalyst is injected via dosing pumps (DP-01A/B) to increase naphtha extraction efficiency. Material is circulated during cooking by two centrifugal pumps per reactor (P-04A/B/C/D/E/F) (one active, one standby) to reduce retention time to 3-4 hours. After cooking, material is moved to the attached tank (V-04/05/06B) for storage before distillation. Fully insulated. o 6-1-3: Cooked Material Tank (V-04/05/06B): Carbon steel tank (2.8m dia, 9m L, 14mm thick) with thermal oil pipes to maintain 190-200°C. Fully insulated. Material is pumped to the vacuum distillation tower via centrifugal pumps (P-05A/B) (one active, one standby) at 22.5 kW / 3000 RPM. 7. Raw Naphtha Storage Unit Collects and condenses naphtha extracted during cooking. • 7-1-1: Raw Naphtha Tanks (V-07A/B/C): Three vertical Stainless Steel 304 tanks (1.5m dia, 5m H) connected to three heat exchangers and two pump pairs. Equipped internally with water spray nozzles on a ring pipe to wash non-condensable gases. • 7-1-2: Heat Exchangers (HE-01A/B/C): Condense naphtha vapors from 140°C down to 40°C using water from the cooling tower. Connected in series. Shell & Tube type, carbon steel (510 mm dia, 6m L) with 70 tubes (0.75-inch dia) in two rows of 35. Includes internal baffles for efficiency. • 7-1-3: Supporting Pumps: Vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM draw naphtha vapors from reactors to the heat exchangers, pushing non-condensable gases to the scrubber (V-14). Centrifugal pumps (P-02A/B) at 11.5 kW / 1500 RPM transport liquid raw naphtha to the Bleaching Unit. 8. Vacuum Distillation Unit The core of the plant, separating remaining light compounds and producing hard asphalt. • 8-1-1: Vacuum Distillation Tower: A vertical tower (~16m total height, 14mm carbon steel). Bottom section (Reboiler) is 3.5m dia x 1.2m H; top section is 1.5m dia x 12m H. Fully insulated. Fed with cooked material at 190-200°C via pumps (P-05A/B). To start extraction (remaining naphtha, Gas Oil, diesel), temperature is raised to 240-250°C using Heating Coil 1 via pumps (P-08A/B) at 55 kW / 3000 RPM, with continuous circulation via pumps (P-07A/B). Vacuum pumps (VP-03A/B) maintain 0.3-0.5 mbar pressure. Light compounds are extracted, condensed (HE-02A/B/C), and stored (V-08/09/10 A/B) over 2.5-3 hours. Afterward, material is heated via Heating Coil 2 to 320-340°C to finalize extraction and produce hard bitumen. Product is extracted via pumps (P-07A/B) at ~320°C, cooled via cooling tower coils, and sent to final tanks (V-18A/B/C). Batch processing takes 6-7 hours daily; continuous operation is possible. • 8-1-2: Supporting Pumps: Vacuum pumps (VP-03A/B) at 5.5 kW / 3000 RPM draw light vapors for condensation. Circulation centrifugal pumps (P-08A/B) at 55 kW move hot material to heating coils; (P-07A/B) circulate material and pump final bitumen product. • 8-1-3: Heating Coils 1 & 2: Carbon steel 4-inch diameter coils heated externally by a Gas Oil burner. Connected in series to heat liquid bitumen in two stages to prevent degradation. • 8-2: Heat Exchangers (HE-02A/B/C): Condense light compound vapors from 240°C to 40°C. Shell & Tube type, carbon steel (600 mm dia, 6m L) with 80 tubes (1-inch dia) in two rows of 40, equipped with baffles. • 8-3: Light Compound Tanks (V-08A/B, V-09A/B, V-10A/B): Six horizontal carbon steel tanks (1.5m dia, 4.5m L, 14mm thick). Receive condensates, linked to heat exchangers and vacuum pumps. Liquids are pumped to the Bleaching Unit via centrifugal pumps (P-06A/B) at 7.5 kW / 1500 RPM. 9. Bleaching Unit Improves the specifications of raw light compounds for local use and marketing. • 9-1: Collection Tank (V-11): Horizontal carbon steel tank (1m dia, 2.5m L, 14mm thick) placed above the system to store and distribute light compounds to the bleaching columns. • 9-2: Bleaching Columns (V-12A/B/C): Three vertical carbon steel vessels (1m dia, 4.5m H, 14mm thick). Contain a 15 cm catalyst layer on trays to bleach raw liquids into high-quality compounds, collected in a bottom horizontal tank. The catalyst is a calcined mixture of Bentonite and Zinc Oxide granules (2-3 mm) homogenized in water, which can be reactivated with steam and 5% HCl. • 9-3: Supporting Pumps: Vacuum pumps (VP-04A/B) at 5.5 kW extract vapors to the scrubber. Centrifugal pumps (P-09A/B) at 7.5 kW push bleached liquids to final tanks. 10. Production Tanks (V-13 A-F & V-18 A-C) • Light Products: Six horizontal carbon steel tanks (2.8m dia, 9m L, 55-ton capacity). V-13A/B for light naphtha, V-13C/D for Gas Oil, V-13E/F for diesel. • Asphalt: Three vertical carbon steel tanks (V-18A/B/C) (5m dia, 9m H). Equipped with thermal oil heating coils to keep asphalt liquid. Fully insulated (90 kg/m³ glass wool, 1.8mm aluminum cover). 11. Supporting Systems • 11-1: Gas Washing (Scrubber) System: Treats non-condensable gases before atmospheric release. Contains V-14 washing tank (1m dia, 2.8m L), a 500mm Flare stack with 3 ignitors, and a 1m x 1m LPG tank (V-15) for ignition. • 11-2: Cooling Tower: Provides cooling water for heat exchangers. Galvanized pressed steel basin (16m L x 2.4m W x 2.8m H), FRP casing, top fans, water distributors, and fill media. Includes Accumulator tank V-20 (1.5m dia, 2m L) and 11 kW pushing pumps (P-14A/B). • 11-3: Thermal Oil Boilers: Includes oil tank, heating boiler, oil pumps, and heating accelerators. • 11-4: Distillation Tower Raw Boilers • 11-5: Power Generation System • 11-6: Production Laboratory • 11-7: Control and Operation Room • 11-8: Catalyst System: Contains a vertical diesel tank (1m dia, 1.5m H) with a 1 kW centrifugal pump (P-11). Two vertical carbon steel tanks (V-17A/B, 1.5m dia, 4.5m H) with an MX-03 hydromotor mixer (7.5 kW, 30 RPM). V-17A is for preparation, V-17B pumps catalyst to the reactor. ________________________________________ Catalyst Chemical Components & Formulations 1. Alumina (Al2O3): Enhances the cracking of chemical bonds in heavy bitumen chains and increases Gas Oil extraction yield. 2. Manganese Dioxide (MnO2): Accelerates the reaction, reduces reaction time, and acts as a gasoline improver. 3. Silicon Dioxide (SiO2): Increases acceleration and reduces reaction time. 4. Iron Oxides (Fe2O): Accelerates the reaction, prevents pipe corrosion, and stops sulfur and wax from sticking to pipes and pumps. Weight Ratios (WT/WT) to Produce One Barrel (200 Liters) of Catalyst: 1. Alumina: Varies by feed: 2-2.5% for Bitumen / 4-5% for Vacuum Residue (VR) / 2-2.5% for Heavy Fuel Oil (HFO). To increase Gas Oil/Diesel (Light fuel) yield, Alumina can be added up to a maximum of 10%. 2. Manganese Dioxide: 2-2.5% for HFO / 4-5% for VR and Bitumen. 3. Iron Oxides: 2-2.5% across all feeds. 4. Silicon Dioxide: 2-2.5% for HFO / 4-5% for Bitumen and VR. 5. Remaining Volume: Filled with C-oil. Note: One barrel (200 Liters) of this mixture is added for every 5 tons of HFO, VR, or Bitumen. Manufacturing Mechanism: All components are placed in a tank, initially mixed with water, and heated to 80-120°C with continuous mixing (20-30 RPM). Once foam is generated, the product is allowed to cool to 80°C. The heating process up to 120°C is repeated 3 or 4 times until foaming ceases. Finally, the temperature is raised to 150°C, and the mixture is topped off to 200 liters using C-oil. To further improve light compound specifications, Zinc Oxide (300 grams) is mixed with 20 kg of Bentonite in C-oil. This is added alongside the catalyst at a ratio of 1/5 barrel of catalyst added to the reactor.
012
Hero
Specialized Bitumen Refining Plant Governorate: Anbar / Hit District Production Capacity: ( ) Tons/Day The city of Hit in the Anbar Governorate is considered one of the most famous areas in the world for its natural "bitumen springs," which have been used for thousands of years (dating back to the Babylonian and Assyrian eras). However, processing this bitumen for modern use requires technical steps to transform it from a raw material into a viable product for construction or industrial applications. Bitumen emerges from these springs as a highly viscous liquid mixed with sulfurous water, salts, and mud impurities. This "Natural Asphalt" differs from petroleum bitumen produced in refineries, and it can also appear in the form of rocky or spongy blocks mixed with mud. To obtain industrially usable products from this bitumen, specifically for: 1. Waterproofing (Felt/Membranes): Considered one of the best coating materials for building foundations to prevent moisture leakage due to its high resistance to hydrolysis. 2. Road Paving: Mixed with gravel and sand to produce asphalt concrete. It is characterized by exceptionally high cohesive strength compared to industrial bitumen. The natural bitumen from these springs must undergo several fundamental processing stages to become industrially viable: 1. Collection and Sedimentation: Bitumen is collected from the springs or quarry sites and left in designated basins to allow the sulfurous water to naturally separate (due to density differences). 2. Primary Heating: The raw bitumen is placed in large boilers to: a. Evaporate the remaining water. b. Reduce viscosity for easier handling. 3. Filtration and Purification: The heated bitumen is screened to remove solid impurities such as gravel, dirt, and suspended organic matter. 4. Secondary Heating and Cooking: The temperature of the bitumen is raised, improving agents are added, and it is prepared for the vacuum distillation process. 5. Vacuum Distillation: The distillation process is conducted under low pressure (vacuum pressure), which allows for: a. The separation of light oils and volatile substances at lower temperatures. b. The production of highly pure "Hard Asphalt," which is highly demanded in the construction industry. ________________________________________ Plant Components and Operational Stages The specialized bitumen plant for processing raw natural bitumen (in both liquid and solid states) consists of a range of specialized equipment designed according to the latest international standards. This equipment aligns with the technical and engineering requirements for bitumen products, complies with Iraqi standard specifications, and adheres to environmental considerations in the Anbar Governorate. 1. Extraction Stage The raw material (solid or liquid) is extracted from quarries designated by the Geological Survey Authority using specialized mechanical equipment. It is stored in stocks or special basins for solid materials, then transported to the refinery site using specialized transport vehicles of various capacities. 2. Storage Stage The raw materials are stored in designated yards to ensure a sufficient inventory for continuous, uninterrupted production for no less than 7 working days. 3. Raw Material Preparation and Primary Heating Stage Raw materials are fed into the plant via hydraulic lifts. This stage includes: • 3-1: Crushing and Digestion: Solid raw materials from the quarries are broken down and digested using a digester (SH-01) equipped with double blades driven by hydraulic motors (22.5 kW capacity). The digester is 5 meters long and 1.80 meters in diameter, made of carbon steel, with Stainless Steel 304 blades. It includes a Stainless Steel piston driven by a 7.5 kW electric motor. • 3-2: Primary Heating: This melts the bitumen and improves pumpability through pipes and pumps. • 3-3: Efficiency Enhancement: To increase melting efficiency, Gas Oil is added to the primary heating basin at a ratio of 1:5 per ton of solid raw material entering the basin (this ratio decreases when using liquid raw bitumen). o 3-2-1: Primary Melting Basin (TK-01): Raw material is heated in a concrete tank (25m L x 5m W x 3m H) with a maximum storage capacity of 300 tons. Heating pipes circulate thermal fluid (oil) at 125°C, with a retention time of 4-6 hours. The tank is internally lined with 6-8 mm carbon steel plates to protect the heating pipes from corrosion. It contains 8 Stainless Steel 304 mixers (MX-01 A/B/C/D/E/F) driven by 7.5 kW electric motors (50 RPM) and gearboxes (1:60 ratio) to mix the material, increase heating efficiency, reduce retention time, and circulate the melted bitumen to eliminate dissolved water, resulting in a homogeneous melt. Covered with a carbon steel roof with service hatches, it connects to an air duct (30x60 cm) linked to 2 air blowers (AB-01A/B) (one operating, one standby) at 22.5 kW / 1500 RPM. These extract water vapor and sulfur fumes, sending them to a scrubber before atmospheric release and water recycling. o 3-2-2: Primary Collection Tank (V-01): A carbon steel tank (12-14 mm thick) with a maximum capacity of 125 tons (10m L x 5m W x 3m H). It connects directly to the primary tank (TK-01) via channels and movable gates to receive only liquid raw material. It contains thermal oil pipes to maintain the liquid raw material at 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum outer cover. Impurities larger than 35 mm are removed and collected in a waste tank. o 3-2-3: Screw Conveyors (SC-01 A/B): Carbon steel screw conveyors with a double-jacketed outer cover filled with thermal oil to maintain the 140°C temperature. Driven by 22.5 kW electric motors (3000 RPM) with 1:40 gearboxes, they transport the liquid raw material to the preliminary filtration unit. 4. Purification Unit Removes suspended impurities from the liquid raw material in two stages: • 4-1: Preliminary Purification Tank (V-02): A carbon steel tank (12-14 mm thick, 125-ton capacity, 5m L x 10m W x 3m H). Receives liquid raw material from the primary collection tank. Contains thermal oil pipes to maintain 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Impurities larger than 15 mm are removed to a waste tank. Material is pumped to the final filtration stage via gear pumps (GP-01 A/B) (one operating, one standby) at 22.5 kW / 1000 RPM. • 4-2: Final Filtration Unit (FT-01): Removes remaining impurities by passing liquids through box filters arranged in 2 trains (8 per train). They feature a two-layer Stainless Steel filter mesh (specified microns) wrapped around square boxes. Liquid enters from the outside, and pure liquid is collected from the inside via a pipe network connected to a manifold. This is driven by two vacuum pumps (VP-01A/B) connected to the raw material tanks. 5. Raw Material Tanks (V-03 A-J) Ten carbon steel tanks (2.5m diameter, 9m length, 14 mm thickness, 45-ton max capacity) equipped with thermal oil heating coils. They receive, store, and prepare the purified raw material for the subsequent cooking reaction. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Connected by a pipe/valve network, the material is pumped via two centrifugal pumps (P-01 A/B) at 22.5 kW / 3000 RPM to the reactor unit. The tanks connect to a pipe network driven by vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM, pushing heating gases and vapors to the gas washing tank (V-14). 6. Reactor (Cooking) Unit (V-04 A/B) Consists of three reactors (55 tons each) that prepare the raw material for vacuum distillation and extract light naphtha compounds. • 6-1: Cooking Process: o 6-1-1: Catalyst System: Consists of two tanks. One prepares the catalyst mixture (1.5m dia, 4m H, 8mm carbon steel) with a mixer (MX-03) driven by a hydromotor and 1:40 gearbox. The second stores Gas Oil added to the preparation unit (1.5m dia, 1m H, 5mm carbon steel) with a 0.5 HP centrifugal pump. o 6-1-2: Reaction Tanks (V-04/05/06A): Three carbon steel tanks (2.8m dia, 9m L, 14mm thick, 55-ton max). Each has 2 Stainless Steel mixers (MX-02 A/B/C/D/E/F) driven by a 7.5 kW motor (1500 RPM) with a 1:40 gearbox. Contains an internal heating system powered by a Gas Oil burner to raise the temperature to 180°C. Catalyst is injected via dosing pumps (DP-01A/B) to increase naphtha extraction efficiency. Material is circulated during cooking by two centrifugal pumps per reactor (P-04A/B/C/D/E/F) (one active, one standby) to reduce retention time to 3-4 hours. After cooking, material is moved to the attached tank (V-04/05/06B) for storage before distillation. Fully insulated. o 6-1-3: Cooked Material Tank (V-04/05/06B): Carbon steel tank (2.8m dia, 9m L, 14mm thick) with thermal oil pipes to maintain 190-200°C. Fully insulated. Material is pumped to the vacuum distillation tower via centrifugal pumps (P-05A/B) (one active, one standby) at 22.5 kW / 3000 RPM. 7. Raw Naphtha Storage Unit Collects and condenses naphtha extracted during cooking. • 7-1-1: Raw Naphtha Tanks (V-07A/B/C): Three vertical Stainless Steel 304 tanks (1.5m dia, 5m H) connected to three heat exchangers and two pump pairs. Equipped internally with water spray nozzles on a ring pipe to wash non-condensable gases. • 7-1-2: Heat Exchangers (HE-01A/B/C): Condense naphtha vapors from 140°C down to 40°C using water from the cooling tower. Connected in series. Shell & Tube type, carbon steel (510 mm dia, 6m L) with 70 tubes (0.75-inch dia) in two rows of 35. Includes internal baffles for efficiency. • 7-1-3: Supporting Pumps: Vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM draw naphtha vapors from reactors to the heat exchangers, pushing non-condensable gases to the scrubber (V-14). Centrifugal pumps (P-02A/B) at 11.5 kW / 1500 RPM transport liquid raw naphtha to the Bleaching Unit. 8. Vacuum Distillation Unit The core of the plant, separating remaining light compounds and producing hard asphalt. • 8-1-1: Vacuum Distillation Tower: A vertical tower (~16m total height, 14mm carbon steel). Bottom section (Reboiler) is 3.5m dia x 1.2m H; top section is 1.5m dia x 12m H. Fully insulated. Fed with cooked material at 190-200°C via pumps (P-05A/B). To start extraction (remaining naphtha, Gas Oil, diesel), temperature is raised to 240-250°C using Heating Coil 1 via pumps (P-08A/B) at 55 kW / 3000 RPM, with continuous circulation via pumps (P-07A/B). Vacuum pumps (VP-03A/B) maintain 0.3-0.5 mbar pressure. Light compounds are extracted, condensed (HE-02A/B/C), and stored (V-08/09/10 A/B) over 2.5-3 hours. Afterward, material is heated via Heating Coil 2 to 320-340°C to finalize extraction and produce hard bitumen. Product is extracted via pumps (P-07A/B) at ~320°C, cooled via cooling tower coils, and sent to final tanks (V-18A/B/C). Batch processing takes 6-7 hours daily; continuous operation is possible. • 8-1-2: Supporting Pumps: Vacuum pumps (VP-03A/B) at 5.5 kW / 3000 RPM draw light vapors for condensation. Circulation centrifugal pumps (P-08A/B) at 55 kW move hot material to heating coils; (P-07A/B) circulate material and pump final bitumen product. • 8-1-3: Heating Coils 1 & 2: Carbon steel 4-inch diameter coils heated externally by a Gas Oil burner. Connected in series to heat liquid bitumen in two stages to prevent degradation. • 8-2: Heat Exchangers (HE-02A/B/C): Condense light compound vapors from 240°C to 40°C. Shell & Tube type, carbon steel (600 mm dia, 6m L) with 80 tubes (1-inch dia) in two rows of 40, equipped with baffles. • 8-3: Light Compound Tanks (V-08A/B, V-09A/B, V-10A/B): Six horizontal carbon steel tanks (1.5m dia, 4.5m L, 14mm thick). Receive condensates, linked to heat exchangers and vacuum pumps. Liquids are pumped to the Bleaching Unit via centrifugal pumps (P-06A/B) at 7.5 kW / 1500 RPM. 9. Bleaching Unit Improves the specifications of raw light compounds for local use and marketing. • 9-1: Collection Tank (V-11): Horizontal carbon steel tank (1m dia, 2.5m L, 14mm thick) placed above the system to store and distribute light compounds to the bleaching columns. • 9-2: Bleaching Columns (V-12A/B/C): Three vertical carbon steel vessels (1m dia, 4.5m H, 14mm thick). Contain a 15 cm catalyst layer on trays to bleach raw liquids into high-quality compounds, collected in a bottom horizontal tank. The catalyst is a calcined mixture of Bentonite and Zinc Oxide granules (2-3 mm) homogenized in water, which can be reactivated with steam and 5% HCl. • 9-3: Supporting Pumps: Vacuum pumps (VP-04A/B) at 5.5 kW extract vapors to the scrubber. Centrifugal pumps (P-09A/B) at 7.5 kW push bleached liquids to final tanks. 10. Production Tanks (V-13 A-F & V-18 A-C) • Light Products: Six horizontal carbon steel tanks (2.8m dia, 9m L, 55-ton capacity). V-13A/B for light naphtha, V-13C/D for Gas Oil, V-13E/F for diesel. • Asphalt: Three vertical carbon steel tanks (V-18A/B/C) (5m dia, 9m H). Equipped with thermal oil heating coils to keep asphalt liquid. Fully insulated (90 kg/m³ glass wool, 1.8mm aluminum cover). 11. Supporting Systems • 11-1: Gas Washing (Scrubber) System: Treats non-condensable gases before atmospheric release. Contains V-14 washing tank (1m dia, 2.8m L), a 500mm Flare stack with 3 ignitors, and a 1m x 1m LPG tank (V-15) for ignition. • 11-2: Cooling Tower: Provides cooling water for heat exchangers. Galvanized pressed steel basin (16m L x 2.4m W x 2.8m H), FRP casing, top fans, water distributors, and fill media. Includes Accumulator tank V-20 (1.5m dia, 2m L) and 11 kW pushing pumps (P-14A/B). • 11-3: Thermal Oil Boilers: Includes oil tank, heating boiler, oil pumps, and heating accelerators. • 11-4: Distillation Tower Raw Boilers • 11-5: Power Generation System • 11-6: Production Laboratory • 11-7: Control and Operation Room • 11-8: Catalyst System: Contains a vertical diesel tank (1m dia, 1.5m H) with a 1 kW centrifugal pump (P-11). Two vertical carbon steel tanks (V-17A/B, 1.5m dia, 4.5m H) with an MX-03 hydromotor mixer (7.5 kW, 30 RPM). V-17A is for preparation, V-17B pumps catalyst to the reactor. ________________________________________ Catalyst Chemical Components & Formulations 1. Alumina (Al2O3): Enhances the cracking of chemical bonds in heavy bitumen chains and increases Gas Oil extraction yield. 2. Manganese Dioxide (MnO2): Accelerates the reaction, reduces reaction time, and acts as a gasoline improver. 3. Silicon Dioxide (SiO2): Increases acceleration and reduces reaction time. 4. Iron Oxides (Fe2O): Accelerates the reaction, prevents pipe corrosion, and stops sulfur and wax from sticking to pipes and pumps. Weight Ratios (WT/WT) to Produce One Barrel (200 Liters) of Catalyst: 1. Alumina: Varies by feed: 2-2.5% for Bitumen / 4-5% for Vacuum Residue (VR) / 2-2.5% for Heavy Fuel Oil (HFO). To increase Gas Oil/Diesel (Light fuel) yield, Alumina can be added up to a maximum of 10%. 2. Manganese Dioxide: 2-2.5% for HFO / 4-5% for VR and Bitumen. 3. Iron Oxides: 2-2.5% across all feeds. 4. Silicon Dioxide: 2-2.5% for HFO / 4-5% for Bitumen and VR. 5. Remaining Volume: Filled with C-oil. Note: One barrel (200 Liters) of this mixture is added for every 5 tons of HFO, VR, or Bitumen. Manufacturing Mechanism: All components are placed in a tank, initially mixed with water, and heated to 80-120°C with continuous mixing (20-30 RPM). Once foam is generated, the product is allowed to cool to 80°C. The heating process up to 120°C is repeated 3 or 4 times until foaming ceases. Finally, the temperature is raised to 150°C, and the mixture is topped off to 200 liters using C-oil. To further improve light compound specifications, Zinc Oxide (300 grams) is mixed with 20 kg of Bentonite in C-oil. This is added alongside the catalyst at a ratio of 1/5 barrel of catalyst added to the reactor.
010
Hero
"Behold a marvel of design—an egg-shaped tent structure that emanates an ethereal glow, inviting you into its enchanting realm. Crafted from a lightweight aluminum framework, this innovative structure features flexible rods that bend and contour effortlessly. The framework forms a circular base and a smaller circle at the top, seamlessly connected by vertical rods that resemble the ribs of an egg. The entire ovoid structure is cloaked in a resilient fabric, specifically chosen for its suitability in tent and canopy construction. The fabric elegantly envelopes the entire surface of the egg-shaped tent, accentuating the seamless and organic form of the structure. Not a single curve or contour is left untouched, as the fabric adheres flawlessly to every edge and fold. The fabric embraces the tent with a gentle embrace, creating an alluring presence that emphasizes its resemblance to a magnificent hatching egg. Step through the grand entrance, and you will discover a world of tranquility and wonder. Inside, there is only emptiness, illuminated by a soft, ambient light that bathes the interior with a serene glow. The absence of physical objects accentuates the sense of spaciousness and invites a deep sense of introspection. The space becomes a sanctuary for personal reflection and connection with oneself. As you gaze upon this remarkable structure, it seamlessly integrates with the natural surroundings, becoming a harmonious element of the landscape. The fabric-covered egg-shaped tent stands as a testament to human ingenuity, offering a captivating and immersive experience. Its exterior showcases the gentle glow that emanates from within, captivating all who behold its beauty. The size of the tent, with its complete coverage and ovoid structure, is designed for a single occupant, providing an intimate and personal space for solace and reflection. The lightweight aluminum framework, meticulously designed, forms a circular base and a smaller circle at the top, with vertical rods extending from the upper ring to the lower one, connecting them to shape the rib-like structure of the egg. Step through the open entrance, and you will enter a sanctuary of serenity, where the only companions are the soft glow and the empty expanse. Allow the encompassing light and the tranquil haven to embrace you, as you embark on a journey of introspection and connection within the allure of this egg-shaped tent."
1127
DreamShaper
"Behold a marvel of design—an egg-shaped tent structure that emanates an ethereal glow, inviting you into its enchanting realm. Crafted from a lightweight aluminum framework, this innovative structure features flexible rods that bend and contour effortlessly. The framework forms a circular base and a smaller circle at the top, seamlessly connected by vertical rods that resemble the ribs of an egg. The entire ovoid structure is cloaked in a resilient fabric, specifically chosen for its suitability in tent and canopy construction. The fabric elegantly envelopes the entire surface of the egg-shaped tent, accentuating the seamless and organic form of the structure. Not a single curve or contour is left untouched, as the fabric adheres flawlessly to every edge and fold. The fabric embraces the tent with a gentle embrace, creating an alluring presence that emphasizes its resemblance to a magnificent hatching egg. Step through the grand entrance, and you will discover a world of tranquility and wonder. Inside, there is only emptiness, illuminated by a soft, ambient light that bathes the interior with a serene glow. The absence of physical objects accentuates the sense of spaciousness and invites a deep sense of introspection. The space becomes a sanctuary for personal reflection and connection with oneself. As you gaze upon this remarkable structure, it seamlessly integrates with the natural surroundings, becoming a harmonious element of the landscape. The fabric-covered egg-shaped tent stands as a testament to human ingenuity, offering a captivating and immersive experience. Its exterior showcases the gentle glow that emanates from within, captivating all who behold its beauty. The size of the tent, with its complete coverage and ovoid structure, is designed for a single occupant, providing an intimate and personal space for solace and reflection. The lightweight aluminum framework, meticulously designed, forms a circular base and a smaller circle at the top, with vertical rods extending from the upper ring to the lower one, connecting them to shape the rib-like structure of the egg. Step through the open entrance, and you will enter a sanctuary of serenity, where the only companions are the soft glow and the empty expanse. Allow the encompassing light and the tranquil haven to embrace you, as you embark on a journey of introspection and connection within the allure of this egg-shaped tent."
0117
DreamShaper
"Behold a marvel of design—an egg-shaped tent structure that emanates an ethereal glow, inviting you into its enchanting realm. Crafted from a lightweight aluminum framework, this innovative structure features flexible rods that bend and contour effortlessly. The framework forms a circular base and a smaller circle at the top, seamlessly connected by vertical rods that resemble the ribs of an egg. The entire ovoid structure is cloaked in a resilient fabric, specifically chosen for its suitability in tent and canopy construction. The fabric elegantly envelopes the entire surface of the egg-shaped tent, accentuating the seamless and organic form of the structure. Not a single curve or contour is left untouched, as the fabric adheres flawlessly to every edge and fold. The fabric embraces the tent with a gentle embrace, creating an alluring presence that emphasizes its resemblance to a magnificent hatching egg. Step through the grand entrance, and you will discover a world of tranquility and wonder. Inside, there is only emptiness, illuminated by a soft, ambient light that bathes the interior with a serene glow. The absence of physical objects accentuates the sense of spaciousness and invites a deep sense of introspection. The space becomes a sanctuary for personal reflection and connection with oneself. As you gaze upon this remarkable structure, it seamlessly integrates with the natural surroundings, becoming a harmonious element of the landscape. The fabric-covered egg-shaped tent stands as a testament to human ingenuity, offering a captivating and immersive experience. Its exterior showcases the gentle glow that emanates from within, captivating all who behold its beauty. The size of the tent, with its complete coverage and ovoid structure, is designed for a single occupant, providing an intimate and personal space for solace and reflection. The lightweight aluminum framework, meticulously designed, forms a circular base and a smaller circle at the top, with vertical rods extending from the upper ring to the lower one, connecting them to shape the rib-like structure of the egg. Step through the open entrance, and you will enter a sanctuary of serenity, where the only companions are the soft glow and the empty expanse. Allow the encompassing light and the tranquil haven to embrace you, as you embark on a journey of introspection and connection within the allure of this egg-shaped tent."
0104
DreamShaper
"Behold a marvel of design—an egg-shaped tent structure that emanates an ethereal glow, inviting you into its enchanting realm. Crafted from a lightweight aluminum framework, this innovative structure features flexible rods that bend and contour effortlessly. The framework forms a circular base and a smaller circle at the top, seamlessly connected by vertical rods that resemble the ribs of an egg. The entire ovoid structure is cloaked in a resilient fabric, specifically chosen for its suitability in tent and canopy construction. The fabric elegantly envelopes the entire surface of the egg-shaped tent, accentuating the seamless and organic form of the structure. Not a single curve or contour is left untouched, as the fabric adheres flawlessly to every edge and fold. The fabric embraces the tent with a gentle embrace, creating an alluring presence that emphasizes its resemblance to a magnificent hatching egg. Step through the grand entrance, and you will discover a world of tranquility and wonder. Inside, there is only emptiness, illuminated by a soft, ambient light that bathes the interior with a serene glow. The absence of physical objects accentuates the sense of spaciousness and invites a deep sense of introspection. The space becomes a sanctuary for personal reflection and connection with oneself. As you gaze upon this remarkable structure, it seamlessly integrates with the natural surroundings, becoming a harmonious element of the landscape. The fabric-covered egg-shaped tent stands as a testament to human ingenuity, offering a captivating and immersive experience. Its exterior showcases the gentle glow that emanates from within, captivating all who behold its beauty. The size of the tent, with its complete coverage and ovoid structure, is designed for a single occupant, providing an intimate and personal space for solace and reflection. The lightweight aluminum framework, meticulously designed, forms a circular base and a smaller circle at the top, with vertical rods extending from the upper ring to the lower one, connecting them to shape the rib-like structure of the egg. Step through the open entrance, and you will enter a sanctuary of serenity, where the only companions are the soft glow and the empty expanse. Allow the encompassing light and the tranquil haven to embrace you, as you embark on a journey of introspection and connection within the allure of this egg-shaped tent."
089
DreamShaper
generate this business card: Layout 1: Modern Minimalist Colors: Primarily Atlantic Blue and Aluminum Snow. Layout:Left Side: Professional headshot in a circular or square frame. Right Side:Company Name: "SAFETY COMPLIANCE PROS" in bold, sans-serif font. Personal Name in a slightly smaller, sans-serif font. Contact information icons aligned vertically:Email icon Phone icon Location icon Geometric Corner Shape: A subtle, minimalist geometric shape in Aluminum Snow, placed at the top right corner of the card.
057
FLUX
generate this business card: Layout 1: Modern Minimalist Colors: Primarily Atlantic Blue and Aluminum Snow. Layout:Left Side: Professional headshot in a circular or square frame. Right Side:Company Name: "SAFETY COMPLIANCE PROS" in bold, sans-serif font. Personal Name in a slightly smaller, sans-serif font. Contact information icons aligned vertically:Email icon Phone icon Location icon Geometric Corner Shape: A subtle, minimalist geometric shape in Aluminum Snow, placed at the top right corner of the card.
044
FLUX
A massive sheet of aluminum, very thin, wide, and long, is being compressed between two large industrial metal rollers. The rollers apply intense pressure, slightly deforming the sheet to make it perfectly flat. The setting is a modern metal processing factory, with light reflections on the shiny aluminum and detailed mechanical features on the rollers. The scene is shown from a slightly angled side perspective, with industrial lighting.
027
FLUX
Specialized Bitumen Refining Plant Governorate: Anbar / Hit District Production Capacity: ( ) Tons/Day The city of Hit in the Anbar Governorate is considered one of the most famous areas in the world for its natural "bitumen springs," which have been used for thousands of years (dating back to the Babylonian and Assyrian eras). However, processing this bitumen for modern use requires technical steps to transform it from a raw material into a viable product for construction or industrial applications. Bitumen emerges from these springs as a highly viscous liquid mixed with sulfurous water, salts, and mud impurities. This "Natural Asphalt" differs from petroleum bitumen produced in refineries, and it can also appear in the form of rocky or spongy blocks mixed with mud. To obtain industrially usable products from this bitumen, specifically for: 1. Waterproofing (Felt/Membranes): Considered one of the best coating materials for building foundations to prevent moisture leakage due to its high resistance to hydrolysis. 2. Road Paving: Mixed with gravel and sand to produce asphalt concrete. It is characterized by exceptionally high cohesive strength compared to industrial bitumen. The natural bitumen from these springs must undergo several fundamental processing stages to become industrially viable: 1. Collection and Sedimentation: Bitumen is collected from the springs or quarry sites and left in designated basins to allow the sulfurous water to naturally separate (due to density differences). 2. Primary Heating: The raw bitumen is placed in large boilers to: a. Evaporate the remaining water. b. Reduce viscosity for easier handling. 3. Filtration and Purification: The heated bitumen is screened to remove solid impurities such as gravel, dirt, and suspended organic matter. 4. Secondary Heating and Cooking: The temperature of the bitumen is raised, improving agents are added, and it is prepared for the vacuum distillation process. 5. Vacuum Distillation: The distillation process is conducted under low pressure (vacuum pressure), which allows for: a. The separation of light oils and volatile substances at lower temperatures. b. The production of highly pure "Hard Asphalt," which is highly demanded in the construction industry. ________________________________________ Plant Components and Operational Stages The specialized bitumen plant for processing raw natural bitumen (in both liquid and solid states) consists of a range of specialized equipment designed according to the latest international standards. This equipment aligns with the technical and engineering requirements for bitumen products, complies with Iraqi standard specifications, and adheres to environmental considerations in the Anbar Governorate. 1. Extraction Stage The raw material (solid or liquid) is extracted from quarries designated by the Geological Survey Authority using specialized mechanical equipment. It is stored in stocks or special basins for solid materials, then transported to the refinery site using specialized transport vehicles of various capacities. 2. Storage Stage The raw materials are stored in designated yards to ensure a sufficient inventory for continuous, uninterrupted production for no less than 7 working days. 3. Raw Material Preparation and Primary Heating Stage Raw materials are fed into the plant via hydraulic lifts. This stage includes: • 3-1: Crushing and Digestion: Solid raw materials from the quarries are broken down and digested using a digester (SH-01) equipped with double blades driven by hydraulic motors (22.5 kW capacity). The digester is 5 meters long and 1.80 meters in diameter, made of carbon steel, with Stainless Steel 304 blades. It includes a Stainless Steel piston driven by a 7.5 kW electric motor. • 3-2: Primary Heating: This melts the bitumen and improves pumpability through pipes and pumps. • 3-3: Efficiency Enhancement: To increase melting efficiency, Gas Oil is added to the primary heating basin at a ratio of 1:5 per ton of solid raw material entering the basin (this ratio decreases when using liquid raw bitumen). o 3-2-1: Primary Melting Basin (TK-01): Raw material is heated in a concrete tank (25m L x 5m W x 3m H) with a maximum storage capacity of 300 tons. Heating pipes circulate thermal fluid (oil) at 125°C, with a retention time of 4-6 hours. The tank is internally lined with 6-8 mm carbon steel plates to protect the heating pipes from corrosion. It contains 8 Stainless Steel 304 mixers (MX-01 A/B/C/D/E/F) driven by 7.5 kW electric motors (50 RPM) and gearboxes (1:60 ratio) to mix the material, increase heating efficiency, reduce retention time, and circulate the melted bitumen to eliminate dissolved water, resulting in a homogeneous melt. Covered with a carbon steel roof with service hatches, it connects to an air duct (30x60 cm) linked to 2 air blowers (AB-01A/B) (one operating, one standby) at 22.5 kW / 1500 RPM. These extract water vapor and sulfur fumes, sending them to a scrubber before atmospheric release and water recycling. o 3-2-2: Primary Collection Tank (V-01): A carbon steel tank (12-14 mm thick) with a maximum capacity of 125 tons (10m L x 5m W x 3m H). It connects directly to the primary tank (TK-01) via channels and movable gates to receive only liquid raw material. It contains thermal oil pipes to maintain the liquid raw material at 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum outer cover. Impurities larger than 35 mm are removed and collected in a waste tank. o 3-2-3: Screw Conveyors (SC-01 A/B): Carbon steel screw conveyors with a double-jacketed outer cover filled with thermal oil to maintain the 140°C temperature. Driven by 22.5 kW electric motors (3000 RPM) with 1:40 gearboxes, they transport the liquid raw material to the preliminary filtration unit. 4. Purification Unit Removes suspended impurities from the liquid raw material in two stages: • 4-1: Preliminary Purification Tank (V-02): A carbon steel tank (12-14 mm thick, 125-ton capacity, 5m L x 10m W x 3m H). Receives liquid raw material from the primary collection tank. Contains thermal oil pipes to maintain 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Impurities larger than 15 mm are removed to a waste tank. Material is pumped to the final filtration stage via gear pumps (GP-01 A/B) (one operating, one standby) at 22.5 kW / 1000 RPM. • 4-2: Final Filtration Unit (FT-01): Removes remaining impurities by passing liquids through box filters arranged in 2 trains (8 per train). They feature a two-layer Stainless Steel filter mesh (specified microns) wrapped around square boxes. Liquid enters from the outside, and pure liquid is collected from the inside via a pipe network connected to a manifold. This is driven by two vacuum pumps (VP-01A/B) connected to the raw material tanks. 5. Raw Material Tanks (V-03 A-J) Ten carbon steel tanks (2.5m diameter, 9m length, 14 mm thickness, 45-ton max capacity) equipped with thermal oil heating coils. They receive, store, and prepare the purified raw material for the subsequent cooking reaction. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Connected by a pipe/valve network, the material is pumped via two centrifugal pumps (P-01 A/B) at 22.5 kW / 3000 RPM to the reactor unit. The tanks connect to a pipe network driven by vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM, pushing heating gases and vapors to the gas washing tank (V-14). 6. Reactor (Cooking) Unit (V-04 A/B) Consists of three reactors (55 tons each) that prepare the raw material for vacuum distillation and extract light naphtha compounds. • 6-1: Cooking Process: o 6-1-1: Catalyst System: Consists of two tanks. One prepares the catalyst mixture (1.5m dia, 4m H, 8mm carbon steel) with a mixer (MX-03) driven by a hydromotor and 1:40 gearbox. The second stores Gas Oil added to the preparation unit (1.5m dia, 1m H, 5mm carbon steel) with a 0.5 HP centrifugal pump. o 6-1-2: Reaction Tanks (V-04/05/06A): Three carbon steel tanks (2.8m dia, 9m L, 14mm thick, 55-ton max). Each has 2 Stainless Steel mixers (MX-02 A/B/C/D/E/F) driven by a 7.5 kW motor (1500 RPM) with a 1:40 gearbox. Contains an internal heating system powered by a Gas Oil burner to raise the temperature to 180°C. Catalyst is injected via dosing pumps (DP-01A/B) to increase naphtha extraction efficiency. Material is circulated during cooking by two centrifugal pumps per reactor (P-04A/B/C/D/E/F) (one active, one standby) to reduce retention time to 3-4 hours. After cooking, material is moved to the attached tank (V-04/05/06B) for storage before distillation. Fully insulated. o 6-1-3: Cooked Material Tank (V-04/05/06B): Carbon steel tank (2.8m dia, 9m L, 14mm thick) with thermal oil pipes to maintain 190-200°C. Fully insulated. Material is pumped to the vacuum distillation tower via centrifugal pumps (P-05A/B) (one active, one standby) at 22.5 kW / 3000 RPM. 7. Raw Naphtha Storage Unit Collects and condenses naphtha extracted during cooking. • 7-1-1: Raw Naphtha Tanks (V-07A/B/C): Three vertical Stainless Steel 304 tanks (1.5m dia, 5m H) connected to three heat exchangers and two pump pairs. Equipped internally with water spray nozzles on a ring pipe to wash non-condensable gases. • 7-1-2: Heat Exchangers (HE-01A/B/C): Condense naphtha vapors from 140°C down to 40°C using water from the cooling tower. Connected in series. Shell & Tube type, carbon steel (510 mm dia, 6m L) with 70 tubes (0.75-inch dia) in two rows of 35. Includes internal baffles for efficiency. • 7-1-3: Supporting Pumps: Vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM draw naphtha vapors from reactors to the heat exchangers, pushing non-condensable gases to the scrubber (V-14). Centrifugal pumps (P-02A/B) at 11.5 kW / 1500 RPM transport liquid raw naphtha to the Bleaching Unit. 8. Vacuum Distillation Unit The core of the plant, separating remaining light compounds and producing hard asphalt. • 8-1-1: Vacuum Distillation Tower: A vertical tower (~16m total height, 14mm carbon steel). Bottom section (Reboiler) is 3.5m dia x 1.2m H; top section is 1.5m dia x 12m H. Fully insulated. Fed with cooked material at 190-200°C via pumps (P-05A/B). To start extraction (remaining naphtha, Gas Oil, diesel), temperature is raised to 240-250°C using Heating Coil 1 via pumps (P-08A/B) at 55 kW / 3000 RPM, with continuous circulation via pumps (P-07A/B). Vacuum pumps (VP-03A/B) maintain 0.3-0.5 mbar pressure. Light compounds are extracted, condensed (HE-02A/B/C), and stored (V-08/09/10 A/B) over 2.5-3 hours. Afterward, material is heated via Heating Coil 2 to 320-340°C to finalize extraction and produce hard bitumen. Product is extracted via pumps (P-07A/B) at ~320°C, cooled via cooling tower coils, and sent to final tanks (V-18A/B/C). Batch processing takes 6-7 hours daily; continuous operation is possible. • 8-1-2: Supporting Pumps: Vacuum pumps (VP-03A/B) at 5.5 kW / 3000 RPM draw light vapors for condensation. Circulation centrifugal pumps (P-08A/B) at 55 kW move hot material to heating coils; (P-07A/B) circulate material and pump final bitumen product. • 8-1-3: Heating Coils 1 & 2: Carbon steel 4-inch diameter coils heated externally by a Gas Oil burner. Connected in series to heat liquid bitumen in two stages to prevent degradation. • 8-2: Heat Exchangers (HE-02A/B/C): Condense light compound vapors from 240°C to 40°C. Shell & Tube type, carbon steel (600 mm dia, 6m L) with 80 tubes (1-inch dia) in two rows of 40, equipped with baffles. • 8-3: Light Compound Tanks (V-08A/B, V-09A/B, V-10A/B): Six horizontal carbon steel tanks (1.5m dia, 4.5m L, 14mm thick). Receive condensates, linked to heat exchangers and vacuum pumps. Liquids are pumped to the Bleaching Unit via centrifugal pumps (P-06A/B) at 7.5 kW / 1500 RPM. 9. Bleaching Unit Improves the specifications of raw light compounds for local use and marketing. • 9-1: Collection Tank (V-11): Horizontal carbon steel tank (1m dia, 2.5m L, 14mm thick) placed above the system to store and distribute light compounds to the bleaching columns. • 9-2: Bleaching Columns (V-12A/B/C): Three vertical carbon steel vessels (1m dia, 4.5m H, 14mm thick). Contain a 15 cm catalyst layer on trays to bleach raw liquids into high-quality compounds, collected in a bottom horizontal tank. The catalyst is a calcined mixture of Bentonite and Zinc Oxide granules (2-3 mm) homogenized in water, which can be reactivated with steam and 5% HCl. • 9-3: Supporting Pumps: Vacuum pumps (VP-04A/B) at 5.5 kW extract vapors to the scrubber. Centrifugal pumps (P-09A/B) at 7.5 kW push bleached liquids to final tanks. 10. Production Tanks (V-13 A-F & V-18 A-C) • Light Products: Six horizontal carbon steel tanks (2.8m dia, 9m L, 55-ton capacity). V-13A/B for light naphtha, V-13C/D for Gas Oil, V-13E/F for diesel. • Asphalt: Three vertical carbon steel tanks (V-18A/B/C) (5m dia, 9m H). Equipped with thermal oil heating coils to keep asphalt liquid. Fully insulated (90 kg/m³ glass wool, 1.8mm aluminum cover). 11. Supporting Systems • 11-1: Gas Washing (Scrubber) System: Treats non-condensable gases before atmospheric release. Contains V-14 washing tank (1m dia, 2.8m L), a 500mm Flare stack with 3 ignitors, and a 1m x 1m LPG tank (V-15) for ignition. • 11-2: Cooling Tower: Provides cooling water for heat exchangers. Galvanized pressed steel basin (16m L x 2.4m W x 2.8m H), FRP casing, top fans, water distributors, and fill media. Includes Accumulator tank V-20 (1.5m dia, 2m L) and 11 kW pushing pumps (P-14A/B). • 11-3: Thermal Oil Boilers: Includes oil tank, heating boiler, oil pumps, and heating accelerators. • 11-4: Distillation Tower Raw Boilers • 11-5: Power Generation System • 11-6: Production Laboratory • 11-7: Control and Operation Room • 11-8: Catalyst System: Contains a vertical diesel tank (1m dia, 1.5m H) with a 1 kW centrifugal pump (P-11). Two vertical carbon steel tanks (V-17A/B, 1.5m dia, 4.5m H) with an MX-03 hydromotor mixer (7.5 kW, 30 RPM). V-17A is for preparation, V-17B pumps catalyst to the reactor. ________________________________________ Catalyst Chemical Components & Formulations 1. Alumina (Al2O3): Enhances the cracking of chemical bonds in heavy bitumen chains and increases Gas Oil extraction yield. 2. Manganese Dioxide (MnO2): Accelerates the reaction, reduces reaction time, and acts as a gasoline improver. 3. Silicon Dioxide (SiO2): Increases acceleration and reduces reaction time. 4. Iron Oxides (Fe2O): Accelerates the reaction, prevents pipe corrosion, and stops sulfur and wax from sticking to pipes and pumps. Weight Ratios (WT/WT) to Produce One Barrel (200 Liters) of Catalyst: 1. Alumina: Varies by feed: 2-2.5% for Bitumen / 4-5% for Vacuum Residue (VR) / 2-2.5% for Heavy Fuel Oil (HFO). To increase Gas Oil/Diesel (Light fuel) yield, Alumina can be added up to a maximum of 10%. 2. Manganese Dioxide: 2-2.5% for HFO / 4-5% for VR and Bitumen. 3. Iron Oxides: 2-2.5% across all feeds. 4. Silicon Dioxide: 2-2.5% for HFO / 4-5% for Bitumen and VR. 5. Remaining Volume: Filled with C-oil. Note: One barrel (200 Liters) of this mixture is added for every 5 tons of HFO, VR, or Bitumen. Manufacturing Mechanism: All components are placed in a tank, initially mixed with water, and heated to 80-120°C with continuous mixing (20-30 RPM). Once foam is generated, the product is allowed to cool to 80°C. The heating process up to 120°C is repeated 3 or 4 times until foaming ceases. Finally, the temperature is raised to 150°C, and the mixture is topped off to 200 liters using C-oil. To further improve light compound specifications, Zinc Oxide (300 grams) is mixed with 20 kg of Bentonite in C-oil. This is added alongside the catalyst at a ratio of 1/5 barrel of catalyst added to the reactor.
019
Hero
Specialized Bitumen Refining Plant Governorate: Anbar / Hit District Production Capacity: ( ) Tons/Day The city of Hit in the Anbar Governorate is considered one of the most famous areas in the world for its natural "bitumen springs," which have been used for thousands of years (dating back to the Babylonian and Assyrian eras). However, processing this bitumen for modern use requires technical steps to transform it from a raw material into a viable product for construction or industrial applications. Bitumen emerges from these springs as a highly viscous liquid mixed with sulfurous water, salts, and mud impurities. This "Natural Asphalt" differs from petroleum bitumen produced in refineries, and it can also appear in the form of rocky or spongy blocks mixed with mud. To obtain industrially usable products from this bitumen, specifically for: 1. Waterproofing (Felt/Membranes): Considered one of the best coating materials for building foundations to prevent moisture leakage due to its high resistance to hydrolysis. 2. Road Paving: Mixed with gravel and sand to produce asphalt concrete. It is characterized by exceptionally high cohesive strength compared to industrial bitumen. The natural bitumen from these springs must undergo several fundamental processing stages to become industrially viable: 1. Collection and Sedimentation: Bitumen is collected from the springs or quarry sites and left in designated basins to allow the sulfurous water to naturally separate (due to density differences). 2. Primary Heating: The raw bitumen is placed in large boilers to: a. Evaporate the remaining water. b. Reduce viscosity for easier handling. 3. Filtration and Purification: The heated bitumen is screened to remove solid impurities such as gravel, dirt, and suspended organic matter. 4. Secondary Heating and Cooking: The temperature of the bitumen is raised, improving agents are added, and it is prepared for the vacuum distillation process. 5. Vacuum Distillation: The distillation process is conducted under low pressure (vacuum pressure), which allows for: a. The separation of light oils and volatile substances at lower temperatures. b. The production of highly pure "Hard Asphalt," which is highly demanded in the construction industry. ________________________________________ Plant Components and Operational Stages The specialized bitumen plant for processing raw natural bitumen (in both liquid and solid states) consists of a range of specialized equipment designed according to the latest international standards. This equipment aligns with the technical and engineering requirements for bitumen products, complies with Iraqi standard specifications, and adheres to environmental considerations in the Anbar Governorate. 1. Extraction Stage The raw material (solid or liquid) is extracted from quarries designated by the Geological Survey Authority using specialized mechanical equipment. It is stored in stocks or special basins for solid materials, then transported to the refinery site using specialized transport vehicles of various capacities. 2. Storage Stage The raw materials are stored in designated yards to ensure a sufficient inventory for continuous, uninterrupted production for no less than 7 working days. 3. Raw Material Preparation and Primary Heating Stage Raw materials are fed into the plant via hydraulic lifts. This stage includes: • 3-1: Crushing and Digestion: Solid raw materials from the quarries are broken down and digested using a digester (SH-01) equipped with double blades driven by hydraulic motors (22.5 kW capacity). The digester is 5 meters long and 1.80 meters in diameter, made of carbon steel, with Stainless Steel 304 blades. It includes a Stainless Steel piston driven by a 7.5 kW electric motor. • 3-2: Primary Heating: This melts the bitumen and improves pumpability through pipes and pumps. • 3-3: Efficiency Enhancement: To increase melting efficiency, Gas Oil is added to the primary heating basin at a ratio of 1:5 per ton of solid raw material entering the basin (this ratio decreases when using liquid raw bitumen). o 3-2-1: Primary Melting Basin (TK-01): Raw material is heated in a concrete tank (25m L x 5m W x 3m H) with a maximum storage capacity of 300 tons. Heating pipes circulate thermal fluid (oil) at 125°C, with a retention time of 4-6 hours. The tank is internally lined with 6-8 mm carbon steel plates to protect the heating pipes from corrosion. It contains 8 Stainless Steel 304 mixers (MX-01 A/B/C/D/E/F) driven by 7.5 kW electric motors (50 RPM) and gearboxes (1:60 ratio) to mix the material, increase heating efficiency, reduce retention time, and circulate the melted bitumen to eliminate dissolved water, resulting in a homogeneous melt. Covered with a carbon steel roof with service hatches, it connects to an air duct (30x60 cm) linked to 2 air blowers (AB-01A/B) (one operating, one standby) at 22.5 kW / 1500 RPM. These extract water vapor and sulfur fumes, sending them to a scrubber before atmospheric release and water recycling. o 3-2-2: Primary Collection Tank (V-01): A carbon steel tank (12-14 mm thick) with a maximum capacity of 125 tons (10m L x 5m W x 3m H). It connects directly to the primary tank (TK-01) via channels and movable gates to receive only liquid raw material. It contains thermal oil pipes to maintain the liquid raw material at 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum outer cover. Impurities larger than 35 mm are removed and collected in a waste tank. o 3-2-3: Screw Conveyors (SC-01 A/B): Carbon steel screw conveyors with a double-jacketed outer cover filled with thermal oil to maintain the 140°C temperature. Driven by 22.5 kW electric motors (3000 RPM) with 1:40 gearboxes, they transport the liquid raw material to the preliminary filtration unit. 4. Purification Unit Removes suspended impurities from the liquid raw material in two stages: • 4-1: Preliminary Purification Tank (V-02): A carbon steel tank (12-14 mm thick, 125-ton capacity, 5m L x 10m W x 3m H). Receives liquid raw material from the primary collection tank. Contains thermal oil pipes to maintain 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Impurities larger than 15 mm are removed to a waste tank. Material is pumped to the final filtration stage via gear pumps (GP-01 A/B) (one operating, one standby) at 22.5 kW / 1000 RPM. • 4-2: Final Filtration Unit (FT-01): Removes remaining impurities by passing liquids through box filters arranged in 2 trains (8 per train). They feature a two-layer Stainless Steel filter mesh (specified microns) wrapped around square boxes. Liquid enters from the outside, and pure liquid is collected from the inside via a pipe network connected to a manifold. This is driven by two vacuum pumps (VP-01A/B) connected to the raw material tanks. 5. Raw Material Tanks (V-03 A-J) Ten carbon steel tanks (2.5m diameter, 9m length, 14 mm thickness, 45-ton max capacity) equipped with thermal oil heating coils. They receive, store, and prepare the purified raw material for the subsequent cooking reaction. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Connected by a pipe/valve network, the material is pumped via two centrifugal pumps (P-01 A/B) at 22.5 kW / 3000 RPM to the reactor unit. The tanks connect to a pipe network driven by vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM, pushing heating gases and vapors to the gas washing tank (V-14). 6. Reactor (Cooking) Unit (V-04 A/B) Consists of three reactors (55 tons each) that prepare the raw material for vacuum distillation and extract light naphtha compounds. • 6-1: Cooking Process: o 6-1-1: Catalyst System: Consists of two tanks. One prepares the catalyst mixture (1.5m dia, 4m H, 8mm carbon steel) with a mixer (MX-03) driven by a hydromotor and 1:40 gearbox. The second stores Gas Oil added to the preparation unit (1.5m dia, 1m H, 5mm carbon steel) with a 0.5 HP centrifugal pump. o 6-1-2: Reaction Tanks (V-04/05/06A): Three carbon steel tanks (2.8m dia, 9m L, 14mm thick, 55-ton max). Each has 2 Stainless Steel mixers (MX-02 A/B/C/D/E/F) driven by a 7.5 kW motor (1500 RPM) with a 1:40 gearbox. Contains an internal heating system powered by a Gas Oil burner to raise the temperature to 180°C. Catalyst is injected via dosing pumps (DP-01A/B) to increase naphtha extraction efficiency. Material is circulated during cooking by two centrifugal pumps per reactor (P-04A/B/C/D/E/F) (one active, one standby) to reduce retention time to 3-4 hours. After cooking, material is moved to the attached tank (V-04/05/06B) for storage before distillation. Fully insulated. o 6-1-3: Cooked Material Tank (V-04/05/06B): Carbon steel tank (2.8m dia, 9m L, 14mm thick) with thermal oil pipes to maintain 190-200°C. Fully insulated. Material is pumped to the vacuum distillation tower via centrifugal pumps (P-05A/B) (one active, one standby) at 22.5 kW / 3000 RPM. 7. Raw Naphtha Storage Unit Collects and condenses naphtha extracted during cooking. • 7-1-1: Raw Naphtha Tanks (V-07A/B/C): Three vertical Stainless Steel 304 tanks (1.5m dia, 5m H) connected to three heat exchangers and two pump pairs. Equipped internally with water spray nozzles on a ring pipe to wash non-condensable gases. • 7-1-2: Heat Exchangers (HE-01A/B/C): Condense naphtha vapors from 140°C down to 40°C using water from the cooling tower. Connected in series. Shell & Tube type, carbon steel (510 mm dia, 6m L) with 70 tubes (0.75-inch dia) in two rows of 35. Includes internal baffles for efficiency. • 7-1-3: Supporting Pumps: Vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM draw naphtha vapors from reactors to the heat exchangers, pushing non-condensable gases to the scrubber (V-14). Centrifugal pumps (P-02A/B) at 11.5 kW / 1500 RPM transport liquid raw naphtha to the Bleaching Unit. 8. Vacuum Distillation Unit The core of the plant, separating remaining light compounds and producing hard asphalt. • 8-1-1: Vacuum Distillation Tower: A vertical tower (~16m total height, 14mm carbon steel). Bottom section (Reboiler) is 3.5m dia x 1.2m H; top section is 1.5m dia x 12m H. Fully insulated. Fed with cooked material at 190-200°C via pumps (P-05A/B). To start extraction (remaining naphtha, Gas Oil, diesel), temperature is raised to 240-250°C using Heating Coil 1 via pumps (P-08A/B) at 55 kW / 3000 RPM, with continuous circulation via pumps (P-07A/B). Vacuum pumps (VP-03A/B) maintain 0.3-0.5 mbar pressure. Light compounds are extracted, condensed (HE-02A/B/C), and stored (V-08/09/10 A/B) over 2.5-3 hours. Afterward, material is heated via Heating Coil 2 to 320-340°C to finalize extraction and produce hard bitumen. Product is extracted via pumps (P-07A/B) at ~320°C, cooled via cooling tower coils, and sent to final tanks (V-18A/B/C). Batch processing takes 6-7 hours daily; continuous operation is possible. • 8-1-2: Supporting Pumps: Vacuum pumps (VP-03A/B) at 5.5 kW / 3000 RPM draw light vapors for condensation. Circulation centrifugal pumps (P-08A/B) at 55 kW move hot material to heating coils; (P-07A/B) circulate material and pump final bitumen product. • 8-1-3: Heating Coils 1 & 2: Carbon steel 4-inch diameter coils heated externally by a Gas Oil burner. Connected in series to heat liquid bitumen in two stages to prevent degradation. • 8-2: Heat Exchangers (HE-02A/B/C): Condense light compound vapors from 240°C to 40°C. Shell & Tube type, carbon steel (600 mm dia, 6m L) with 80 tubes (1-inch dia) in two rows of 40, equipped with baffles. • 8-3: Light Compound Tanks (V-08A/B, V-09A/B, V-10A/B): Six horizontal carbon steel tanks (1.5m dia, 4.5m L, 14mm thick). Receive condensates, linked to heat exchangers and vacuum pumps. Liquids are pumped to the Bleaching Unit via centrifugal pumps (P-06A/B) at 7.5 kW / 1500 RPM. 9. Bleaching Unit Improves the specifications of raw light compounds for local use and marketing. • 9-1: Collection Tank (V-11): Horizontal carbon steel tank (1m dia, 2.5m L, 14mm thick) placed above the system to store and distribute light compounds to the bleaching columns. • 9-2: Bleaching Columns (V-12A/B/C): Three vertical carbon steel vessels (1m dia, 4.5m H, 14mm thick). Contain a 15 cm catalyst layer on trays to bleach raw liquids into high-quality compounds, collected in a bottom horizontal tank. The catalyst is a calcined mixture of Bentonite and Zinc Oxide granules (2-3 mm) homogenized in water, which can be reactivated with steam and 5% HCl. • 9-3: Supporting Pumps: Vacuum pumps (VP-04A/B) at 5.5 kW extract vapors to the scrubber. Centrifugal pumps (P-09A/B) at 7.5 kW push bleached liquids to final tanks. 10. Production Tanks (V-13 A-F & V-18 A-C) • Light Products: Six horizontal carbon steel tanks (2.8m dia, 9m L, 55-ton capacity). V-13A/B for light naphtha, V-13C/D for Gas Oil, V-13E/F for diesel. • Asphalt: Three vertical carbon steel tanks (V-18A/B/C) (5m dia, 9m H). Equipped with thermal oil heating coils to keep asphalt liquid. Fully insulated (90 kg/m³ glass wool, 1.8mm aluminum cover). 11. Supporting Systems • 11-1: Gas Washing (Scrubber) System: Treats non-condensable gases before atmospheric release. Contains V-14 washing tank (1m dia, 2.8m L), a 500mm Flare stack with 3 ignitors, and a 1m x 1m LPG tank (V-15) for ignition. • 11-2: Cooling Tower: Provides cooling water for heat exchangers. Galvanized pressed steel basin (16m L x 2.4m W x 2.8m H), FRP casing, top fans, water distributors, and fill media. Includes Accumulator tank V-20 (1.5m dia, 2m L) and 11 kW pushing pumps (P-14A/B). • 11-3: Thermal Oil Boilers: Includes oil tank, heating boiler, oil pumps, and heating accelerators. • 11-4: Distillation Tower Raw Boilers • 11-5: Power Generation System • 11-6: Production Laboratory • 11-7: Control and Operation Room • 11-8: Catalyst System: Contains a vertical diesel tank (1m dia, 1.5m H) with a 1 kW centrifugal pump (P-11). Two vertical carbon steel tanks (V-17A/B, 1.5m dia, 4.5m H) with an MX-03 hydromotor mixer (7.5 kW, 30 RPM). V-17A is for preparation, V-17B pumps catalyst to the reactor. ________________________________________ Catalyst Chemical Components & Formulations 1. Alumina (Al2O3): Enhances the cracking of chemical bonds in heavy bitumen chains and increases Gas Oil extraction yield. 2. Manganese Dioxide (MnO2): Accelerates the reaction, reduces reaction time, and acts as a gasoline improver. 3. Silicon Dioxide (SiO2): Increases acceleration and reduces reaction time. 4. Iron Oxides (Fe2O): Accelerates the reaction, prevents pipe corrosion, and stops sulfur and wax from sticking to pipes and pumps. Weight Ratios (WT/WT) to Produce One Barrel (200 Liters) of Catalyst: 1. Alumina: Varies by feed: 2-2.5% for Bitumen / 4-5% for Vacuum Residue (VR) / 2-2.5% for Heavy Fuel Oil (HFO). To increase Gas Oil/Diesel (Light fuel) yield, Alumina can be added up to a maximum of 10%. 2. Manganese Dioxide: 2-2.5% for HFO / 4-5% for VR and Bitumen. 3. Iron Oxides: 2-2.5% across all feeds. 4. Silicon Dioxide: 2-2.5% for HFO / 4-5% for Bitumen and VR. 5. Remaining Volume: Filled with C-oil. Note: One barrel (200 Liters) of this mixture is added for every 5 tons of HFO, VR, or Bitumen. Manufacturing Mechanism: All components are placed in a tank, initially mixed with water, and heated to 80-120°C with continuous mixing (20-30 RPM). Once foam is generated, the product is allowed to cool to 80°C. The heating process up to 120°C is repeated 3 or 4 times until foaming ceases. Finally, the temperature is raised to 150°C, and the mixture is topped off to 200 liters using C-oil. To further improve light compound specifications, Zinc Oxide (300 grams) is mixed with 20 kg of Bentonite in C-oil. This is added alongside the catalyst at a ratio of 1/5 barrel of catalyst added to the reactor.
010
Hero
{ "prompt_type": "descriptive_replication", "reference_adherence": "STRICT_VISUAL_FIDELITY", "aspect_ratio": "4:5", "style": "1990s compact digital camera aesthetic with harsh on‑camera flash, grainy texture, washed‑out colors, high contrast, subtle chromatic aberration and halation. NO HDR, NO tone mapping, NO modern digital processing. The image looks like a raw, unedited flash photograph taken at night in a luxury modern interior (a penthouse or study), using an early digital point‑and‑shoot (e.g., Kodak DC series, Sony Mavica). The flash is the main light source – it creates deep, sharp shadows and overexposed highlights, the classic 'deer‑in‑headlights' effect. Background details are heavily darkened but faintly visible (dark wooden shelves, a leather chair, a window with city lights). Ultra‑realistic skin texture (on hands/arms), visible pores, fabric grain, metal reflections – all rendered with natural grain and no smoothing. The composition is slightly tilted, with a slight vertical banding artifact (CCD readout noise), a micro‑scratch on the lens (barely visible in lower right), and a subtle vignette with a faint greenish‑purple color shift at the edges – all adding authentic 90s digital camera character. The scene is dark, moody, powerful, with a raw, criminal‑luxury atmosphere.", "character": { "identity": "Wealthy mysterious man (Welison), early 30s, athletic build, broad shoulders, dominant posture. Bare chested (or wearing a black fitted t‑shirt?), but from previous descriptions often bare chested to show tattoo. However, holding a MacBook and money might be better with a black tactical top. But we can keep the bare chest / open jacket style. I'll make him wear a black ribbed sleeveless top (or bare chest with tactical trousers) to show the chest tattoo. Let's use a black sleeveless compression top to keep consistent with earlier 'tactical' look, but also allow the tattoo to be visible? Actually, the tattoo is on the upper chest – if he's holding items in both hands, his chest might be exposed. I'll describe him wearing a black tailored jacket (unbuttoned) or just bare chest? To avoid overcomplicating, I'll use a black fitted vest (tactical) that leaves arms and upper chest exposed, so the tattoo can be seen. Or simply bare chested with black trousers. Let's go with bare chested (as in many previous prompts) to show the tattoo.", "face_and_head": { "visibility": "completely obscured by a black ribbed balaclava (full‑face coverage, no openings) with a metallic silver‑grey embroidered Masonic pattern (all‑seeing eye, pyramid, geometric symbols). Over the balaclava, rectangular gold‑frame sunglasses (semi‑rimless, dark grey gradient lenses, Masonic logo on left lens)." }, "torso_and_tattoo": { "description": "Bare chest, slightly sweaty. Large tattoo on center chest in Chicano‑smoke style: dark clouds, swirling smoke, soft waves merging into skin. In the center, the word 'ШРЕДЕР' in a bold calligraphic brushstroke style with a thin white double outline, creating a subtle glow. Below the text, a Masonic pyramid with an all‑seeing eye and geometric symbols." }, "necklace": "Thick, heavy moissanite chain, Cuban link weave, spelling 'SHREDE1RR' with large letters, hanging onto bare chest.", "clothing": { "description": "Bare chested. Black tailored trousers (slim fit, low waist), black leather belt, barefoot or black shoes (not visible)." }, "hands_and_props": { "left_hand": "Holding a silver MacBook laptop (closed or slightly open? Preferably closed, held flat or at an angle). The MacBook screen is dark, the aluminum body reflects the flash with bright specular highlights.", "right_hand": "Holding a very thick stack of 50‑euro banknotes (approx. 10‑12 cm thick, tightly bound with a white or yellow rubber band). The notes are crisp, the flash catches the holograms and the edge details, euro symbol visible on the top note.", "pose": "Standing facing the camera directly, centered, slightly low angle. Arms slightly bent, holding both items at waist or chest level. The MacBook is held horizontally by the left hand (like a tray), the money stack is held vertically or slightly tilted in the right hand, showing the thickness. The pose is dominant, wealthy, controlling." } }, "environment": { "setting": "Luxury modern penthouse study at night. Dark wooden shelves with books and abstract sculptures, a large leather armchair in the background, a window revealing faint city lights (completely darkened by flash). The desk is polished black glass, barely visible. The atmosphere is opulent and secretive.", "background": { "description": "Very dark, almost black, with faint outlines of bookshelves and a window. A single dim light source (overpowered) but not visible. The flash creates a bright circular hotspot directly behind the subject, fading to black edges." } }, "lighting_and_atmosphere": { "source": "ON‑CAMERA FLASH ONLY (early 1990s compact digital camera). No other light sources. This is NOT HDR.", "quality": "extremely harsh, high contrast, overexposed highlights on the MacBook aluminum body, the white rubber band on the money, the gold sunglasses, the moissanite chain, and the specular highlights on the sweaty skin.", "effects": [ "strong, direct flash creating hard highlights on the MacBook casing (silver reflections), on the euro banknotes holograms, and on the glossy surfaces", "the white double outline of the tattoo reflects the flash with a faint glow", "background completely black – no details visible except faint outlines", "grainy texture typical of early digital compacts (heavy grain in shadows, fine grain in highlights)", "washed out colors, skin tones pale with a slight blue/green cast from the flash", "extremely high contrast – bright whites (MacBook, money edge) next to deep blacks", "subtle chromatic aberration (purple/green fringing) on high‑contrast edges (MacBook corners, sunglasses, banknotes edges)", "slight barrel distortion, lens flare (small circular artifacts from the flash)", "vertical banding artifact (CCD readout noise) visible in the dark background", "a micro‑scratch on the lens in the lower right corner", "subtle greenish‑purple vignette at the edges" ], "color_cast": "cool white balance (slightly blue/green), typical of early digital flashes. The MacBook silver appears with a cool tint, the money is pale greenish‑yellow, skin pale.", "contrast": "extremely high (maximum)" }, "camera_and_technical": { "perspective": "Straight‑on, eye level, centered composition. Medium shot (from mid‑chest to above head). Camera distance ~1.5‑2 m.", "camera_position": "handheld, compact digital camera from early 1990s (e.g., Kodak DC series, Sony Mavica), 35mm equivalent, fixed focus or autofocus with slight softness, aperture f/2.8‑f/4, shutter speed 1/60s, ISO 200‑400 with heavy grain.", "framing": "vertical 4:5, medium shot, subject perfectly centered, slight tilt (~2‑3°), a small intruding element (a strap or finger) in the upper left corner, a micro‑scratch on the lens in lower right.", "focus": "slightly soft, typical of flash photography, the face (mask) and the items (MacBook, money) are relatively sharp, background out of focus and black.", "visual_fidelity": "grainy, low resolution aesthetic, harsh flash, no HDR, no tone mapping, ultra high quality real image (realistic because of imperfections), candid snapshot with authentic 1990s compact camera feel." }, "realism_constraints": { "allowed": [ "grain", "washed out colors", "overexposed highlights", "harsh shadows with no detail", "pitch black background", "imperfect composition (slight tilt, intruding element, lens micro‑scratch, vertical banding, vignette)", "natural skin texture on arms and chest (pores, sweat beads, muscle)", "visible carbon fiber weave (mask), aluminum texture (MacBook), paper texture (money)", "chromatic aberration", "barrel distortion", "lens flare" ], "forbidden": [ "HDR", "tone mapping", "dynamic range compression", "lifted shadows", "detail in shadows", "soft lighting", "multiple light sources", "fill light", "ambient light visible (except faint outlines)", "even exposure", "balanced lighting", "modern digital perfection", "sharp focus (clinical)", "perfect composition", "cinematic look", "8k", "masterpiece", "airbrushed skin", "plastic skin", "CGI", "3d render", "stylized", "smartphone HDR", "deep fusion", "smart HDR", "visible brand logos (except Apple on MacBook? that's fine but we can ignore)", "any facial features visible through mask", "skin on face or neck", "matte plastic mask" ] }, "negative_prompt": [ "different character", "face visible", "facial features", "eyes visible", "mouth visible", "skin on face", "skin on neck", "beauty filters", "airbrushed skin", "anime", "cartoon", "over-sharpening", "clean digital look", "perfect exposure", "smooth gradients", "messy appearance", "greasy skin", "overexposed (beyond intended aesthetic)", "HDR", "tone mapping", "dynamic range", "lifted shadows", "detail in shadows", "soft lighting", "fill light", "ambient light", "even exposure", "balanced lighting", "CGI", "3d render", "plastic texture (except carbon fiber mask)", "smooth", "airbrushed", "digital art", "painting", "deformed hands", "extra fingers", "missing fingers", "blurry (beyond intentional soft focus)", "low detail", "unrealistic proportions", "bad anatomy", "watermark", "signature", "professional photography", "studio lighting (modern softbox)", "sharp focus (clinical)", "perfect composition", "cinematic (modern)", "8k", "masterpiece", "stylized", "modern digital", "natural light (flash must dominate)", "golden hour", "teal and orange", "warm tones", "iPhone", "LED flash (only 1990s compact camera flash)", "modern smartphone", "daylight", "no flash look", "bright background", "detailed background", "left hand not holding MacBook", "right hand not holding money", "MacBook open", "money scattered" ] }
09
Nano Banana
"Behold a marvel of design—an egg-shaped tent structure that emanates an ethereal glow, inviting you into its enchanting realm. Crafted from a lightweight aluminum framework, this innovative structure features flexible rods that bend and contour effortlessly. The framework forms a circular base and a smaller circle at the top, seamlessly connected by vertical rods that resemble the ribs of an egg. The entire ovoid structure is cloaked in a resilient fabric, specifically chosen for its suitability in tent and canopy construction. The fabric elegantly envelopes the entire surface of the egg-shaped tent, accentuating the seamless and organic form of the structure. Not a single curve or contour is left untouched, as the fabric adheres flawlessly to every edge and fold. The fabric embraces the tent with a gentle embrace, creating an alluring presence that emphasizes its resemblance to a magnificent hatching egg. Step through the grand entrance, and you will discover a world of tranquility and wonder. Inside, there is only emptiness, illuminated by a soft, ambient light that bathes the interior with a serene glow. The absence of physical objects accentuates the sense of spaciousness and invites a deep sense of introspection. The space becomes a sanctuary for personal reflection and connection with oneself. As you gaze upon this remarkable structure, it seamlessly integrates with the natural surroundings, becoming a harmonious element of the landscape. The fabric-covered egg-shaped tent stands as a testament to human ingenuity, offering a captivating and immersive experience. Its exterior showcases the gentle glow that emanates from within, captivating all who behold its beauty. The size of the tent, with its complete coverage and ovoid structure, is designed for a single occupant, providing an intimate and personal space for solace and reflection. The lightweight aluminum framework, meticulously designed, forms a circular base and a smaller circle at the top, with vertical rods extending from the upper ring to the lower one, connecting them to shape the rib-like structure of the egg. Step through the open entrance, and you will enter a sanctuary of serenity, where the only companions are the soft glow and the empty expanse. Allow the encompassing light and the tranquil haven to embrace you, as you embark on a journey of introspection and connection within the allure of this egg-shaped tent."
095
DreamShaper
generate this business card: Layout 1: Modern Minimalist Colors: Primarily Atlantic Blue and Aluminum Snow. Layout:Left Side: Professional headshot in a circular or square frame. Right Side:Company Name: "SAFETY COMPLIANCE PROS" in bold, sans-serif font. Personal Name in a slightly smaller, sans-serif font. Contact information icons aligned vertically: Email icon Phone icon Location icon Geometric Corner Shape: A geometric shape in Aluminum Snow, placed at the top right corner of the card.
081
FLUX
A massive sheet of aluminum, very thin, wide, and long, is being compressed between two large industrial metal rollers. The rollers apply intense pressure, slightly deforming the sheet to make it perfectly flat. The setting is a modern metal processing factory, with light reflections on the shiny aluminum and detailed mechanical features on the rollers. The scene is shown from a slightly angled side perspective, with industrial lighting.
050
FLUX
Specialized Bitumen Refining Plant Governorate: Anbar / Hit District Production Capacity: ( ) Tons/Day The city of Hit in the Anbar Governorate is considered one of the most famous areas in the world for its natural "bitumen springs," which have been used for thousands of years (dating back to the Babylonian and Assyrian eras). However, processing this bitumen for modern use requires technical steps to transform it from a raw material into a viable product for construction or industrial applications. Bitumen emerges from these springs as a highly viscous liquid mixed with sulfurous water, salts, and mud impurities. This "Natural Asphalt" differs from petroleum bitumen produced in refineries, and it can also appear in the form of rocky or spongy blocks mixed with mud. To obtain industrially usable products from this bitumen, specifically for: 1. Waterproofing (Felt/Membranes): Considered one of the best coating materials for building foundations to prevent moisture leakage due to its high resistance to hydrolysis. 2. Road Paving: Mixed with gravel and sand to produce asphalt concrete. It is characterized by exceptionally high cohesive strength compared to industrial bitumen. The natural bitumen from these springs must undergo several fundamental processing stages to become industrially viable: 1. Collection and Sedimentation: Bitumen is collected from the springs or quarry sites and left in designated basins to allow the sulfurous water to naturally separate (due to density differences). 2. Primary Heating: The raw bitumen is placed in large boilers to: a. Evaporate the remaining water. b. Reduce viscosity for easier handling. 3. Filtration and Purification: The heated bitumen is screened to remove solid impurities such as gravel, dirt, and suspended organic matter. 4. Secondary Heating and Cooking: The temperature of the bitumen is raised, improving agents are added, and it is prepared for the vacuum distillation process. 5. Vacuum Distillation: The distillation process is conducted under low pressure (vacuum pressure), which allows for: a. The separation of light oils and volatile substances at lower temperatures. b. The production of highly pure "Hard Asphalt," which is highly demanded in the construction industry. ________________________________________ Plant Components and Operational Stages The specialized bitumen plant for processing raw natural bitumen (in both liquid and solid states) consists of a range of specialized equipment designed according to the latest international standards. This equipment aligns with the technical and engineering requirements for bitumen products, complies with Iraqi standard specifications, and adheres to environmental considerations in the Anbar Governorate. 1. Extraction Stage The raw material (solid or liquid) is extracted from quarries designated by the Geological Survey Authority using specialized mechanical equipment. It is stored in stocks or special basins for solid materials, then transported to the refinery site using specialized transport vehicles of various capacities. 2. Storage Stage The raw materials are stored in designated yards to ensure a sufficient inventory for continuous, uninterrupted production for no less than 7 working days. 3. Raw Material Preparation and Primary Heating Stage Raw materials are fed into the plant via hydraulic lifts. This stage includes: • 3-1: Crushing and Digestion: Solid raw materials from the quarries are broken down and digested using a digester (SH-01) equipped with double blades driven by hydraulic motors (22.5 kW capacity). The digester is 5 meters long and 1.80 meters in diameter, made of carbon steel, with Stainless Steel 304 blades. It includes a Stainless Steel piston driven by a 7.5 kW electric motor. • 3-2: Primary Heating: This melts the bitumen and improves pumpability through pipes and pumps. • 3-3: Efficiency Enhancement: To increase melting efficiency, Gas Oil is added to the primary heating basin at a ratio of 1:5 per ton of solid raw material entering the basin (this ratio decreases when using liquid raw bitumen). o 3-2-1: Primary Melting Basin (TK-01): Raw material is heated in a concrete tank (25m L x 5m W x 3m H) with a maximum storage capacity of 300 tons. Heating pipes circulate thermal fluid (oil) at 125°C, with a retention time of 4-6 hours. The tank is internally lined with 6-8 mm carbon steel plates to protect the heating pipes from corrosion. It contains 8 Stainless Steel 304 mixers (MX-01 A/B/C/D/E/F) driven by 7.5 kW electric motors (50 RPM) and gearboxes (1:60 ratio) to mix the material, increase heating efficiency, reduce retention time, and circulate the melted bitumen to eliminate dissolved water, resulting in a homogeneous melt. Covered with a carbon steel roof with service hatches, it connects to an air duct (30x60 cm) linked to 2 air blowers (AB-01A/B) (one operating, one standby) at 22.5 kW / 1500 RPM. These extract water vapor and sulfur fumes, sending them to a scrubber before atmospheric release and water recycling. o 3-2-2: Primary Collection Tank (V-01): A carbon steel tank (12-14 mm thick) with a maximum capacity of 125 tons (10m L x 5m W x 3m H). It connects directly to the primary tank (TK-01) via channels and movable gates to receive only liquid raw material. It contains thermal oil pipes to maintain the liquid raw material at 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum outer cover. Impurities larger than 35 mm are removed and collected in a waste tank. o 3-2-3: Screw Conveyors (SC-01 A/B): Carbon steel screw conveyors with a double-jacketed outer cover filled with thermal oil to maintain the 140°C temperature. Driven by 22.5 kW electric motors (3000 RPM) with 1:40 gearboxes, they transport the liquid raw material to the preliminary filtration unit. 4. Purification Unit Removes suspended impurities from the liquid raw material in two stages: • 4-1: Preliminary Purification Tank (V-02): A carbon steel tank (12-14 mm thick, 125-ton capacity, 5m L x 10m W x 3m H). Receives liquid raw material from the primary collection tank. Contains thermal oil pipes to maintain 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Impurities larger than 15 mm are removed to a waste tank. Material is pumped to the final filtration stage via gear pumps (GP-01 A/B) (one operating, one standby) at 22.5 kW / 1000 RPM. • 4-2: Final Filtration Unit (FT-01): Removes remaining impurities by passing liquids through box filters arranged in 2 trains (8 per train). They feature a two-layer Stainless Steel filter mesh (specified microns) wrapped around square boxes. Liquid enters from the outside, and pure liquid is collected from the inside via a pipe network connected to a manifold. This is driven by two vacuum pumps (VP-01A/B) connected to the raw material tanks. 5. Raw Material Tanks (V-03 A-J) Ten carbon steel tanks (2.5m diameter, 9m length, 14 mm thickness, 45-ton max capacity) equipped with thermal oil heating coils. They receive, store, and prepare the purified raw material for the subsequent cooking reaction. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Connected by a pipe/valve network, the material is pumped via two centrifugal pumps (P-01 A/B) at 22.5 kW / 3000 RPM to the reactor unit. The tanks connect to a pipe network driven by vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM, pushing heating gases and vapors to the gas washing tank (V-14). 6. Reactor (Cooking) Unit (V-04 A/B) Consists of three reactors (55 tons each) that prepare the raw material for vacuum distillation and extract light naphtha compounds. • 6-1: Cooking Process: o 6-1-1: Catalyst System: Consists of two tanks. One prepares the catalyst mixture (1.5m dia, 4m H, 8mm carbon steel) with a mixer (MX-03) driven by a hydromotor and 1:40 gearbox. The second stores Gas Oil added to the preparation unit (1.5m dia, 1m H, 5mm carbon steel) with a 0.5 HP centrifugal pump. o 6-1-2: Reaction Tanks (V-04/05/06A): Three carbon steel tanks (2.8m dia, 9m L, 14mm thick, 55-ton max). Each has 2 Stainless Steel mixers (MX-02 A/B/C/D/E/F) driven by a 7.5 kW motor (1500 RPM) with a 1:40 gearbox. Contains an internal heating system powered by a Gas Oil burner to raise the temperature to 180°C. Catalyst is injected via dosing pumps (DP-01A/B) to increase naphtha extraction efficiency. Material is circulated during cooking by two centrifugal pumps per reactor (P-04A/B/C/D/E/F) (one active, one standby) to reduce retention time to 3-4 hours. After cooking, material is moved to the attached tank (V-04/05/06B) for storage before distillation. Fully insulated. o 6-1-3: Cooked Material Tank (V-04/05/06B): Carbon steel tank (2.8m dia, 9m L, 14mm thick) with thermal oil pipes to maintain 190-200°C. Fully insulated. Material is pumped to the vacuum distillation tower via centrifugal pumps (P-05A/B) (one active, one standby) at 22.5 kW / 3000 RPM. 7. Raw Naphtha Storage Unit Collects and condenses naphtha extracted during cooking. • 7-1-1: Raw Naphtha Tanks (V-07A/B/C): Three vertical Stainless Steel 304 tanks (1.5m dia, 5m H) connected to three heat exchangers and two pump pairs. Equipped internally with water spray nozzles on a ring pipe to wash non-condensable gases. • 7-1-2: Heat Exchangers (HE-01A/B/C): Condense naphtha vapors from 140°C down to 40°C using water from the cooling tower. Connected in series. Shell & Tube type, carbon steel (510 mm dia, 6m L) with 70 tubes (0.75-inch dia) in two rows of 35. Includes internal baffles for efficiency. • 7-1-3: Supporting Pumps: Vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM draw naphtha vapors from reactors to the heat exchangers, pushing non-condensable gases to the scrubber (V-14). Centrifugal pumps (P-02A/B) at 11.5 kW / 1500 RPM transport liquid raw naphtha to the Bleaching Unit. 8. Vacuum Distillation Unit The core of the plant, separating remaining light compounds and producing hard asphalt. • 8-1-1: Vacuum Distillation Tower: A vertical tower (~16m total height, 14mm carbon steel). Bottom section (Reboiler) is 3.5m dia x 1.2m H; top section is 1.5m dia x 12m H. Fully insulated. Fed with cooked material at 190-200°C via pumps (P-05A/B). To start extraction (remaining naphtha, Gas Oil, diesel), temperature is raised to 240-250°C using Heating Coil 1 via pumps (P-08A/B) at 55 kW / 3000 RPM, with continuous circulation via pumps (P-07A/B). Vacuum pumps (VP-03A/B) maintain 0.3-0.5 mbar pressure. Light compounds are extracted, condensed (HE-02A/B/C), and stored (V-08/09/10 A/B) over 2.5-3 hours. Afterward, material is heated via Heating Coil 2 to 320-340°C to finalize extraction and produce hard bitumen. Product is extracted via pumps (P-07A/B) at ~320°C, cooled via cooling tower coils, and sent to final tanks (V-18A/B/C). Batch processing takes 6-7 hours daily; continuous operation is possible. • 8-1-2: Supporting Pumps: Vacuum pumps (VP-03A/B) at 5.5 kW / 3000 RPM draw light vapors for condensation. Circulation centrifugal pumps (P-08A/B) at 55 kW move hot material to heating coils; (P-07A/B) circulate material and pump final bitumen product. • 8-1-3: Heating Coils 1 & 2: Carbon steel 4-inch diameter coils heated externally by a Gas Oil burner. Connected in series to heat liquid bitumen in two stages to prevent degradation. • 8-2: Heat Exchangers (HE-02A/B/C): Condense light compound vapors from 240°C to 40°C. Shell & Tube type, carbon steel (600 mm dia, 6m L) with 80 tubes (1-inch dia) in two rows of 40, equipped with baffles. • 8-3: Light Compound Tanks (V-08A/B, V-09A/B, V-10A/B): Six horizontal carbon steel tanks (1.5m dia, 4.5m L, 14mm thick). Receive condensates, linked to heat exchangers and vacuum pumps. Liquids are pumped to the Bleaching Unit via centrifugal pumps (P-06A/B) at 7.5 kW / 1500 RPM. 9. Bleaching Unit Improves the specifications of raw light compounds for local use and marketing. • 9-1: Collection Tank (V-11): Horizontal carbon steel tank (1m dia, 2.5m L, 14mm thick) placed above the system to store and distribute light compounds to the bleaching columns. • 9-2: Bleaching Columns (V-12A/B/C): Three vertical carbon steel vessels (1m dia, 4.5m H, 14mm thick). Contain a 15 cm catalyst layer on trays to bleach raw liquids into high-quality compounds, collected in a bottom horizontal tank. The catalyst is a calcined mixture of Bentonite and Zinc Oxide granules (2-3 mm) homogenized in water, which can be reactivated with steam and 5% HCl. • 9-3: Supporting Pumps: Vacuum pumps (VP-04A/B) at 5.5 kW extract vapors to the scrubber. Centrifugal pumps (P-09A/B) at 7.5 kW push bleached liquids to final tanks. 10. Production Tanks (V-13 A-F & V-18 A-C) • Light Products: Six horizontal carbon steel tanks (2.8m dia, 9m L, 55-ton capacity). V-13A/B for light naphtha, V-13C/D for Gas Oil, V-13E/F for diesel. • Asphalt: Three vertical carbon steel tanks (V-18A/B/C) (5m dia, 9m H). Equipped with thermal oil heating coils to keep asphalt liquid. Fully insulated (90 kg/m³ glass wool, 1.8mm aluminum cover). 11. Supporting Systems • 11-1: Gas Washing (Scrubber) System: Treats non-condensable gases before atmospheric release. Contains V-14 washing tank (1m dia, 2.8m L), a 500mm Flare stack with 3 ignitors, and a 1m x 1m LPG tank (V-15) for ignition. • 11-2: Cooling Tower: Provides cooling water for heat exchangers. Galvanized pressed steel basin (16m L x 2.4m W x 2.8m H), FRP casing, top fans, water distributors, and fill media. Includes Accumulator tank V-20 (1.5m dia, 2m L) and 11 kW pushing pumps (P-14A/B). • 11-3: Thermal Oil Boilers: Includes oil tank, heating boiler, oil pumps, and heating accelerators. • 11-4: Distillation Tower Raw Boilers • 11-5: Power Generation System • 11-6: Production Laboratory • 11-7: Control and Operation Room • 11-8: Catalyst System: Contains a vertical diesel tank (1m dia, 1.5m H) with a 1 kW centrifugal pump (P-11). Two vertical carbon steel tanks (V-17A/B, 1.5m dia, 4.5m H) with an MX-03 hydromotor mixer (7.5 kW, 30 RPM). V-17A is for preparation, V-17B pumps catalyst to the reactor. ________________________________________ Catalyst Chemical Components & Formulations 1. Alumina (Al2O3): Enhances the cracking of chemical bonds in heavy bitumen chains and increases Gas Oil extraction yield. 2. Manganese Dioxide (MnO2): Accelerates the reaction, reduces reaction time, and acts as a gasoline improver. 3. Silicon Dioxide (SiO2): Increases acceleration and reduces reaction time. 4. Iron Oxides (Fe2O): Accelerates the reaction, prevents pipe corrosion, and stops sulfur and wax from sticking to pipes and pumps. Weight Ratios (WT/WT) to Produce One Barrel (200 Liters) of Catalyst: 1. Alumina: Varies by feed: 2-2.5% for Bitumen / 4-5% for Vacuum Residue (VR) / 2-2.5% for Heavy Fuel Oil (HFO). To increase Gas Oil/Diesel (Light fuel) yield, Alumina can be added up to a maximum of 10%. 2. Manganese Dioxide: 2-2.5% for HFO / 4-5% for VR and Bitumen. 3. Iron Oxides: 2-2.5% across all feeds. 4. Silicon Dioxide: 2-2.5% for HFO / 4-5% for Bitumen and VR. 5. Remaining Volume: Filled with C-oil. Note: One barrel (200 Liters) of this mixture is added for every 5 tons of HFO, VR, or Bitumen. Manufacturing Mechanism: All components are placed in a tank, initially mixed with water, and heated to 80-120°C with continuous mixing (20-30 RPM). Once foam is generated, the product is allowed to cool to 80°C. The heating process up to 120°C is repeated 3 or 4 times until foaming ceases. Finally, the temperature is raised to 150°C, and the mixture is topped off to 200 liters using C-oil. To further improve light compound specifications, Zinc Oxide (300 grams) is mixed with 20 kg of Bentonite in C-oil. This is added alongside the catalyst at a ratio of 1/5 barrel of catalyst added to the reactor.
015
Hero
Specialized Bitumen Refining Plant Governorate: Anbar / Hit District Production Capacity: ( ) Tons/Day The city of Hit in the Anbar Governorate is considered one of the most famous areas in the world for its natural "bitumen springs," which have been used for thousands of years (dating back to the Babylonian and Assyrian eras). However, processing this bitumen for modern use requires technical steps to transform it from a raw material into a viable product for construction or industrial applications. Bitumen emerges from these springs as a highly viscous liquid mixed with sulfurous water, salts, and mud impurities. This "Natural Asphalt" differs from petroleum bitumen produced in refineries, and it can also appear in the form of rocky or spongy blocks mixed with mud. To obtain industrially usable products from this bitumen, specifically for: 1. Waterproofing (Felt/Membranes): Considered one of the best coating materials for building foundations to prevent moisture leakage due to its high resistance to hydrolysis. 2. Road Paving: Mixed with gravel and sand to produce asphalt concrete. It is characterized by exceptionally high cohesive strength compared to industrial bitumen. The natural bitumen from these springs must undergo several fundamental processing stages to become industrially viable: 1. Collection and Sedimentation: Bitumen is collected from the springs or quarry sites and left in designated basins to allow the sulfurous water to naturally separate (due to density differences). 2. Primary Heating: The raw bitumen is placed in large boilers to: a. Evaporate the remaining water. b. Reduce viscosity for easier handling. 3. Filtration and Purification: The heated bitumen is screened to remove solid impurities such as gravel, dirt, and suspended organic matter. 4. Secondary Heating and Cooking: The temperature of the bitumen is raised, improving agents are added, and it is prepared for the vacuum distillation process. 5. Vacuum Distillation: The distillation process is conducted under low pressure (vacuum pressure), which allows for: a. The separation of light oils and volatile substances at lower temperatures. b. The production of highly pure "Hard Asphalt," which is highly demanded in the construction industry. ________________________________________ Plant Components and Operational Stages The specialized bitumen plant for processing raw natural bitumen (in both liquid and solid states) consists of a range of specialized equipment designed according to the latest international standards. This equipment aligns with the technical and engineering requirements for bitumen products, complies with Iraqi standard specifications, and adheres to environmental considerations in the Anbar Governorate. 1. Extraction Stage The raw material (solid or liquid) is extracted from quarries designated by the Geological Survey Authority using specialized mechanical equipment. It is stored in stocks or special basins for solid materials, then transported to the refinery site using specialized transport vehicles of various capacities. 2. Storage Stage The raw materials are stored in designated yards to ensure a sufficient inventory for continuous, uninterrupted production for no less than 7 working days. 3. Raw Material Preparation and Primary Heating Stage Raw materials are fed into the plant via hydraulic lifts. This stage includes: • 3-1: Crushing and Digestion: Solid raw materials from the quarries are broken down and digested using a digester (SH-01) equipped with double blades driven by hydraulic motors (22.5 kW capacity). The digester is 5 meters long and 1.80 meters in diameter, made of carbon steel, with Stainless Steel 304 blades. It includes a Stainless Steel piston driven by a 7.5 kW electric motor. • 3-2: Primary Heating: This melts the bitumen and improves pumpability through pipes and pumps. • 3-3: Efficiency Enhancement: To increase melting efficiency, Gas Oil is added to the primary heating basin at a ratio of 1:5 per ton of solid raw material entering the basin (this ratio decreases when using liquid raw bitumen). o 3-2-1: Primary Melting Basin (TK-01): Raw material is heated in a concrete tank (25m L x 5m W x 3m H) with a maximum storage capacity of 300 tons. Heating pipes circulate thermal fluid (oil) at 125°C, with a retention time of 4-6 hours. The tank is internally lined with 6-8 mm carbon steel plates to protect the heating pipes from corrosion. It contains 8 Stainless Steel 304 mixers (MX-01 A/B/C/D/E/F) driven by 7.5 kW electric motors (50 RPM) and gearboxes (1:60 ratio) to mix the material, increase heating efficiency, reduce retention time, and circulate the melted bitumen to eliminate dissolved water, resulting in a homogeneous melt. Covered with a carbon steel roof with service hatches, it connects to an air duct (30x60 cm) linked to 2 air blowers (AB-01A/B) (one operating, one standby) at 22.5 kW / 1500 RPM. These extract water vapor and sulfur fumes, sending them to a scrubber before atmospheric release and water recycling. o 3-2-2: Primary Collection Tank (V-01): A carbon steel tank (12-14 mm thick) with a maximum capacity of 125 tons (10m L x 5m W x 3m H). It connects directly to the primary tank (TK-01) via channels and movable gates to receive only liquid raw material. It contains thermal oil pipes to maintain the liquid raw material at 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum outer cover. Impurities larger than 35 mm are removed and collected in a waste tank. o 3-2-3: Screw Conveyors (SC-01 A/B): Carbon steel screw conveyors with a double-jacketed outer cover filled with thermal oil to maintain the 140°C temperature. Driven by 22.5 kW electric motors (3000 RPM) with 1:40 gearboxes, they transport the liquid raw material to the preliminary filtration unit. 4. Purification Unit Removes suspended impurities from the liquid raw material in two stages: • 4-1: Preliminary Purification Tank (V-02): A carbon steel tank (12-14 mm thick, 125-ton capacity, 5m L x 10m W x 3m H). Receives liquid raw material from the primary collection tank. Contains thermal oil pipes to maintain 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Impurities larger than 15 mm are removed to a waste tank. Material is pumped to the final filtration stage via gear pumps (GP-01 A/B) (one operating, one standby) at 22.5 kW / 1000 RPM. • 4-2: Final Filtration Unit (FT-01): Removes remaining impurities by passing liquids through box filters arranged in 2 trains (8 per train). They feature a two-layer Stainless Steel filter mesh (specified microns) wrapped around square boxes. Liquid enters from the outside, and pure liquid is collected from the inside via a pipe network connected to a manifold. This is driven by two vacuum pumps (VP-01A/B) connected to the raw material tanks. 5. Raw Material Tanks (V-03 A-J) Ten carbon steel tanks (2.5m diameter, 9m length, 14 mm thickness, 45-ton max capacity) equipped with thermal oil heating coils. They receive, store, and prepare the purified raw material for the subsequent cooking reaction. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Connected by a pipe/valve network, the material is pumped via two centrifugal pumps (P-01 A/B) at 22.5 kW / 3000 RPM to the reactor unit. The tanks connect to a pipe network driven by vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM, pushing heating gases and vapors to the gas washing tank (V-14). 6. Reactor (Cooking) Unit (V-04 A/B) Consists of three reactors (55 tons each) that prepare the raw material for vacuum distillation and extract light naphtha compounds. • 6-1: Cooking Process: o 6-1-1: Catalyst System: Consists of two tanks. One prepares the catalyst mixture (1.5m dia, 4m H, 8mm carbon steel) with a mixer (MX-03) driven by a hydromotor and 1:40 gearbox. The second stores Gas Oil added to the preparation unit (1.5m dia, 1m H, 5mm carbon steel) with a 0.5 HP centrifugal pump. o 6-1-2: Reaction Tanks (V-04/05/06A): Three carbon steel tanks (2.8m dia, 9m L, 14mm thick, 55-ton max). Each has 2 Stainless Steel mixers (MX-02 A/B/C/D/E/F) driven by a 7.5 kW motor (1500 RPM) with a 1:40 gearbox. Contains an internal heating system powered by a Gas Oil burner to raise the temperature to 180°C. Catalyst is injected via dosing pumps (DP-01A/B) to increase naphtha extraction efficiency. Material is circulated during cooking by two centrifugal pumps per reactor (P-04A/B/C/D/E/F) (one active, one standby) to reduce retention time to 3-4 hours. After cooking, material is moved to the attached tank (V-04/05/06B) for storage before distillation. Fully insulated. o 6-1-3: Cooked Material Tank (V-04/05/06B): Carbon steel tank (2.8m dia, 9m L, 14mm thick) with thermal oil pipes to maintain 190-200°C. Fully insulated. Material is pumped to the vacuum distillation tower via centrifugal pumps (P-05A/B) (one active, one standby) at 22.5 kW / 3000 RPM. 7. Raw Naphtha Storage Unit Collects and condenses naphtha extracted during cooking. • 7-1-1: Raw Naphtha Tanks (V-07A/B/C): Three vertical Stainless Steel 304 tanks (1.5m dia, 5m H) connected to three heat exchangers and two pump pairs. Equipped internally with water spray nozzles on a ring pipe to wash non-condensable gases. • 7-1-2: Heat Exchangers (HE-01A/B/C): Condense naphtha vapors from 140°C down to 40°C using water from the cooling tower. Connected in series. Shell & Tube type, carbon steel (510 mm dia, 6m L) with 70 tubes (0.75-inch dia) in two rows of 35. Includes internal baffles for efficiency. • 7-1-3: Supporting Pumps: Vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM draw naphtha vapors from reactors to the heat exchangers, pushing non-condensable gases to the scrubber (V-14). Centrifugal pumps (P-02A/B) at 11.5 kW / 1500 RPM transport liquid raw naphtha to the Bleaching Unit. 8. Vacuum Distillation Unit The core of the plant, separating remaining light compounds and producing hard asphalt. • 8-1-1: Vacuum Distillation Tower: A vertical tower (~16m total height, 14mm carbon steel). Bottom section (Reboiler) is 3.5m dia x 1.2m H; top section is 1.5m dia x 12m H. Fully insulated. Fed with cooked material at 190-200°C via pumps (P-05A/B). To start extraction (remaining naphtha, Gas Oil, diesel), temperature is raised to 240-250°C using Heating Coil 1 via pumps (P-08A/B) at 55 kW / 3000 RPM, with continuous circulation via pumps (P-07A/B). Vacuum pumps (VP-03A/B) maintain 0.3-0.5 mbar pressure. Light compounds are extracted, condensed (HE-02A/B/C), and stored (V-08/09/10 A/B) over 2.5-3 hours. Afterward, material is heated via Heating Coil 2 to 320-340°C to finalize extraction and produce hard bitumen. Product is extracted via pumps (P-07A/B) at ~320°C, cooled via cooling tower coils, and sent to final tanks (V-18A/B/C). Batch processing takes 6-7 hours daily; continuous operation is possible. • 8-1-2: Supporting Pumps: Vacuum pumps (VP-03A/B) at 5.5 kW / 3000 RPM draw light vapors for condensation. Circulation centrifugal pumps (P-08A/B) at 55 kW move hot material to heating coils; (P-07A/B) circulate material and pump final bitumen product. • 8-1-3: Heating Coils 1 & 2: Carbon steel 4-inch diameter coils heated externally by a Gas Oil burner. Connected in series to heat liquid bitumen in two stages to prevent degradation. • 8-2: Heat Exchangers (HE-02A/B/C): Condense light compound vapors from 240°C to 40°C. Shell & Tube type, carbon steel (600 mm dia, 6m L) with 80 tubes (1-inch dia) in two rows of 40, equipped with baffles. • 8-3: Light Compound Tanks (V-08A/B, V-09A/B, V-10A/B): Six horizontal carbon steel tanks (1.5m dia, 4.5m L, 14mm thick). Receive condensates, linked to heat exchangers and vacuum pumps. Liquids are pumped to the Bleaching Unit via centrifugal pumps (P-06A/B) at 7.5 kW / 1500 RPM. 9. Bleaching Unit Improves the specifications of raw light compounds for local use and marketing. • 9-1: Collection Tank (V-11): Horizontal carbon steel tank (1m dia, 2.5m L, 14mm thick) placed above the system to store and distribute light compounds to the bleaching columns. • 9-2: Bleaching Columns (V-12A/B/C): Three vertical carbon steel vessels (1m dia, 4.5m H, 14mm thick). Contain a 15 cm catalyst layer on trays to bleach raw liquids into high-quality compounds, collected in a bottom horizontal tank. The catalyst is a calcined mixture of Bentonite and Zinc Oxide granules (2-3 mm) homogenized in water, which can be reactivated with steam and 5% HCl. • 9-3: Supporting Pumps: Vacuum pumps (VP-04A/B) at 5.5 kW extract vapors to the scrubber. Centrifugal pumps (P-09A/B) at 7.5 kW push bleached liquids to final tanks. 10. Production Tanks (V-13 A-F & V-18 A-C) • Light Products: Six horizontal carbon steel tanks (2.8m dia, 9m L, 55-ton capacity). V-13A/B for light naphtha, V-13C/D for Gas Oil, V-13E/F for diesel. • Asphalt: Three vertical carbon steel tanks (V-18A/B/C) (5m dia, 9m H). Equipped with thermal oil heating coils to keep asphalt liquid. Fully insulated (90 kg/m³ glass wool, 1.8mm aluminum cover). 11. Supporting Systems • 11-1: Gas Washing (Scrubber) System: Treats non-condensable gases before atmospheric release. Contains V-14 washing tank (1m dia, 2.8m L), a 500mm Flare stack with 3 ignitors, and a 1m x 1m LPG tank (V-15) for ignition. • 11-2: Cooling Tower: Provides cooling water for heat exchangers. Galvanized pressed steel basin (16m L x 2.4m W x 2.8m H), FRP casing, top fans, water distributors, and fill media. Includes Accumulator tank V-20 (1.5m dia, 2m L) and 11 kW pushing pumps (P-14A/B). • 11-3: Thermal Oil Boilers: Includes oil tank, heating boiler, oil pumps, and heating accelerators. • 11-4: Distillation Tower Raw Boilers • 11-5: Power Generation System • 11-6: Production Laboratory • 11-7: Control and Operation Room • 11-8: Catalyst System: Contains a vertical diesel tank (1m dia, 1.5m H) with a 1 kW centrifugal pump (P-11). Two vertical carbon steel tanks (V-17A/B, 1.5m dia, 4.5m H) with an MX-03 hydromotor mixer (7.5 kW, 30 RPM). V-17A is for preparation, V-17B pumps catalyst to the reactor. ________________________________________ Catalyst Chemical Components & Formulations 1. Alumina (Al2O3): Enhances the cracking of chemical bonds in heavy bitumen chains and increases Gas Oil extraction yield. 2. Manganese Dioxide (MnO2): Accelerates the reaction, reduces reaction time, and acts as a gasoline improver. 3. Silicon Dioxide (SiO2): Increases acceleration and reduces reaction time. 4. Iron Oxides (Fe2O): Accelerates the reaction, prevents pipe corrosion, and stops sulfur and wax from sticking to pipes and pumps. Weight Ratios (WT/WT) to Produce One Barrel (200 Liters) of Catalyst: 1. Alumina: Varies by feed: 2-2.5% for Bitumen / 4-5% for Vacuum Residue (VR) / 2-2.5% for Heavy Fuel Oil (HFO). To increase Gas Oil/Diesel (Light fuel) yield, Alumina can be added up to a maximum of 10%. 2. Manganese Dioxide: 2-2.5% for HFO / 4-5% for VR and Bitumen. 3. Iron Oxides: 2-2.5% across all feeds. 4. Silicon Dioxide: 2-2.5% for HFO / 4-5% for Bitumen and VR. 5. Remaining Volume: Filled with C-oil. Note: One barrel (200 Liters) of this mixture is added for every 5 tons of HFO, VR, or Bitumen. Manufacturing Mechanism: All components are placed in a tank, initially mixed with water, and heated to 80-120°C with continuous mixing (20-30 RPM). Once foam is generated, the product is allowed to cool to 80°C. The heating process up to 120°C is repeated 3 or 4 times until foaming ceases. Finally, the temperature is raised to 150°C, and the mixture is topped off to 200 liters using C-oil. To further improve light compound specifications, Zinc Oxide (300 grams) is mixed with 20 kg of Bentonite in C-oil. This is added alongside the catalyst at a ratio of 1/5 barrel of catalyst added to the reactor.
010
Hero
"Behold a marvel of design—an egg-shaped tent structure that emanates an ethereal glow, inviting you into its enchanting realm. Crafted from a lightweight aluminum framework, this innovative structure features flexible rods that bend and contour effortlessly. The framework forms a circular base and a smaller circle at the top, seamlessly connected by vertical rods that resemble the ribs of an egg. The entire ovoid structure is cloaked in a resilient fabric, specifically chosen for its suitability in tent and canopy construction. The fabric elegantly envelopes the entire surface of the egg-shaped tent, accentuating the seamless and organic form of the structure. Not a single curve or contour is left untouched, as the fabric adheres flawlessly to every edge and fold. The fabric embraces the tent with a gentle embrace, creating an alluring presence that emphasizes its resemblance to a magnificent hatching egg. Step through the grand entrance, and you will discover a world of tranquility and wonder. Inside, there is only emptiness, illuminated by a soft, ambient light that bathes the interior with a serene glow. The absence of physical objects accentuates the sense of spaciousness and invites a deep sense of introspection. The space becomes a sanctuary for personal reflection and connection with oneself. As you gaze upon this remarkable structure, it seamlessly integrates with the natural surroundings, becoming a harmonious element of the landscape. The fabric-covered egg-shaped tent stands as a testament to human ingenuity, offering a captivating and immersive experience. Its exterior showcases the gentle glow that emanates from within, captivating all who behold its beauty. The size of the tent, with its complete coverage and ovoid structure, is designed for a single occupant, providing an intimate and personal space for solace and reflection. The lightweight aluminum framework, meticulously designed, forms a circular base and a smaller circle at the top, with vertical rods extending from the upper ring to the lower one, connecting them to shape the rib-like structure of the egg. Step through the open entrance, and you will enter a sanctuary of serenity, where the only companions are the soft glow and the empty expanse. Allow the encompassing light and the tranquil haven to embrace you, as you embark on a journey of introspection and connection within the allure of this egg-shaped tent."
1127
DreamShaper
"Behold a marvel of design—an egg-shaped tent structure that emanates an ethereal glow, inviting you into its enchanting realm. Crafted from a lightweight aluminum framework, this innovative structure features flexible rods that bend and contour effortlessly. The framework forms a circular base and a smaller circle at the top, seamlessly connected by vertical rods that resemble the ribs of an egg. The entire ovoid structure is cloaked in a resilient fabric, specifically chosen for its suitability in tent and canopy construction. The fabric elegantly envelopes the entire surface of the egg-shaped tent, accentuating the seamless and organic form of the structure. Not a single curve or contour is left untouched, as the fabric adheres flawlessly to every edge and fold. The fabric embraces the tent with a gentle embrace, creating an alluring presence that emphasizes its resemblance to a magnificent hatching egg. Step through the grand entrance, and you will discover a world of tranquility and wonder. Inside, there is only emptiness, illuminated by a soft, ambient light that bathes the interior with a serene glow. The absence of physical objects accentuates the sense of spaciousness and invites a deep sense of introspection. The space becomes a sanctuary for personal reflection and connection with oneself. As you gaze upon this remarkable structure, it seamlessly integrates with the natural surroundings, becoming a harmonious element of the landscape. The fabric-covered egg-shaped tent stands as a testament to human ingenuity, offering a captivating and immersive experience. Its exterior showcases the gentle glow that emanates from within, captivating all who behold its beauty. The size of the tent, with its complete coverage and ovoid structure, is designed for a single occupant, providing an intimate and personal space for solace and reflection. The lightweight aluminum framework, meticulously designed, forms a circular base and a smaller circle at the top, with vertical rods extending from the upper ring to the lower one, connecting them to shape the rib-like structure of the egg. Step through the open entrance, and you will enter a sanctuary of serenity, where the only companions are the soft glow and the empty expanse. Allow the encompassing light and the tranquil haven to embrace you, as you embark on a journey of introspection and connection within the allure of this egg-shaped tent."
089
DreamShaper
generate this business card: Layout 1: Modern Minimalist Colors: Primarily Atlantic Blue and Aluminum Snow. Layout:Left Side: Professional headshot in a circular or square frame. Right Side:Company Name: "SAFETY COMPLIANCE PROS" in bold, sans-serif font. Personal Name in a slightly smaller, sans-serif font. Contact information icons aligned vertically:Email icon Phone icon Location icon Geometric Corner Shape: A subtle, minimalist geometric shape in Aluminum Snow, placed at the top right corner of the card.
057
FLUX
generate this business card: Layout 1: Modern Minimalist Colors: Primarily Atlantic Blue and Aluminum Snow. Layout:Left Side: Professional headshot in a circular or square frame. Right Side:Company Name: "SAFETY COMPLIANCE PROS" in bold, sans-serif font. Personal Name in a slightly smaller, sans-serif font. Contact information icons aligned vertically:Email icon Phone icon Location icon Geometric Corner Shape: A subtle, minimalist geometric shape in Aluminum Snow, placed at the top right corner of the card.
044
FLUX
A massive sheet of aluminum, very thin, wide, and long, is being compressed between two large industrial metal rollers. The rollers apply intense pressure, slightly deforming the sheet to make it perfectly flat. The setting is a modern metal processing factory, with light reflections on the shiny aluminum and detailed mechanical features on the rollers. The scene is shown from a slightly angled side perspective, with industrial lighting.
027
FLUX
Specialized Bitumen Refining Plant Governorate: Anbar / Hit District Production Capacity: ( ) Tons/Day The city of Hit in the Anbar Governorate is considered one of the most famous areas in the world for its natural "bitumen springs," which have been used for thousands of years (dating back to the Babylonian and Assyrian eras). However, processing this bitumen for modern use requires technical steps to transform it from a raw material into a viable product for construction or industrial applications. Bitumen emerges from these springs as a highly viscous liquid mixed with sulfurous water, salts, and mud impurities. This "Natural Asphalt" differs from petroleum bitumen produced in refineries, and it can also appear in the form of rocky or spongy blocks mixed with mud. To obtain industrially usable products from this bitumen, specifically for: 1. Waterproofing (Felt/Membranes): Considered one of the best coating materials for building foundations to prevent moisture leakage due to its high resistance to hydrolysis. 2. Road Paving: Mixed with gravel and sand to produce asphalt concrete. It is characterized by exceptionally high cohesive strength compared to industrial bitumen. The natural bitumen from these springs must undergo several fundamental processing stages to become industrially viable: 1. Collection and Sedimentation: Bitumen is collected from the springs or quarry sites and left in designated basins to allow the sulfurous water to naturally separate (due to density differences). 2. Primary Heating: The raw bitumen is placed in large boilers to: a. Evaporate the remaining water. b. Reduce viscosity for easier handling. 3. Filtration and Purification: The heated bitumen is screened to remove solid impurities such as gravel, dirt, and suspended organic matter. 4. Secondary Heating and Cooking: The temperature of the bitumen is raised, improving agents are added, and it is prepared for the vacuum distillation process. 5. Vacuum Distillation: The distillation process is conducted under low pressure (vacuum pressure), which allows for: a. The separation of light oils and volatile substances at lower temperatures. b. The production of highly pure "Hard Asphalt," which is highly demanded in the construction industry. ________________________________________ Plant Components and Operational Stages The specialized bitumen plant for processing raw natural bitumen (in both liquid and solid states) consists of a range of specialized equipment designed according to the latest international standards. This equipment aligns with the technical and engineering requirements for bitumen products, complies with Iraqi standard specifications, and adheres to environmental considerations in the Anbar Governorate. 1. Extraction Stage The raw material (solid or liquid) is extracted from quarries designated by the Geological Survey Authority using specialized mechanical equipment. It is stored in stocks or special basins for solid materials, then transported to the refinery site using specialized transport vehicles of various capacities. 2. Storage Stage The raw materials are stored in designated yards to ensure a sufficient inventory for continuous, uninterrupted production for no less than 7 working days. 3. Raw Material Preparation and Primary Heating Stage Raw materials are fed into the plant via hydraulic lifts. This stage includes: • 3-1: Crushing and Digestion: Solid raw materials from the quarries are broken down and digested using a digester (SH-01) equipped with double blades driven by hydraulic motors (22.5 kW capacity). The digester is 5 meters long and 1.80 meters in diameter, made of carbon steel, with Stainless Steel 304 blades. It includes a Stainless Steel piston driven by a 7.5 kW electric motor. • 3-2: Primary Heating: This melts the bitumen and improves pumpability through pipes and pumps. • 3-3: Efficiency Enhancement: To increase melting efficiency, Gas Oil is added to the primary heating basin at a ratio of 1:5 per ton of solid raw material entering the basin (this ratio decreases when using liquid raw bitumen). o 3-2-1: Primary Melting Basin (TK-01): Raw material is heated in a concrete tank (25m L x 5m W x 3m H) with a maximum storage capacity of 300 tons. Heating pipes circulate thermal fluid (oil) at 125°C, with a retention time of 4-6 hours. The tank is internally lined with 6-8 mm carbon steel plates to protect the heating pipes from corrosion. It contains 8 Stainless Steel 304 mixers (MX-01 A/B/C/D/E/F) driven by 7.5 kW electric motors (50 RPM) and gearboxes (1:60 ratio) to mix the material, increase heating efficiency, reduce retention time, and circulate the melted bitumen to eliminate dissolved water, resulting in a homogeneous melt. Covered with a carbon steel roof with service hatches, it connects to an air duct (30x60 cm) linked to 2 air blowers (AB-01A/B) (one operating, one standby) at 22.5 kW / 1500 RPM. These extract water vapor and sulfur fumes, sending them to a scrubber before atmospheric release and water recycling. o 3-2-2: Primary Collection Tank (V-01): A carbon steel tank (12-14 mm thick) with a maximum capacity of 125 tons (10m L x 5m W x 3m H). It connects directly to the primary tank (TK-01) via channels and movable gates to receive only liquid raw material. It contains thermal oil pipes to maintain the liquid raw material at 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum outer cover. Impurities larger than 35 mm are removed and collected in a waste tank. o 3-2-3: Screw Conveyors (SC-01 A/B): Carbon steel screw conveyors with a double-jacketed outer cover filled with thermal oil to maintain the 140°C temperature. Driven by 22.5 kW electric motors (3000 RPM) with 1:40 gearboxes, they transport the liquid raw material to the preliminary filtration unit. 4. Purification Unit Removes suspended impurities from the liquid raw material in two stages: • 4-1: Preliminary Purification Tank (V-02): A carbon steel tank (12-14 mm thick, 125-ton capacity, 5m L x 10m W x 3m H). Receives liquid raw material from the primary collection tank. Contains thermal oil pipes to maintain 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Impurities larger than 15 mm are removed to a waste tank. Material is pumped to the final filtration stage via gear pumps (GP-01 A/B) (one operating, one standby) at 22.5 kW / 1000 RPM. • 4-2: Final Filtration Unit (FT-01): Removes remaining impurities by passing liquids through box filters arranged in 2 trains (8 per train). They feature a two-layer Stainless Steel filter mesh (specified microns) wrapped around square boxes. Liquid enters from the outside, and pure liquid is collected from the inside via a pipe network connected to a manifold. This is driven by two vacuum pumps (VP-01A/B) connected to the raw material tanks. 5. Raw Material Tanks (V-03 A-J) Ten carbon steel tanks (2.5m diameter, 9m length, 14 mm thickness, 45-ton max capacity) equipped with thermal oil heating coils. They receive, store, and prepare the purified raw material for the subsequent cooking reaction. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Connected by a pipe/valve network, the material is pumped via two centrifugal pumps (P-01 A/B) at 22.5 kW / 3000 RPM to the reactor unit. The tanks connect to a pipe network driven by vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM, pushing heating gases and vapors to the gas washing tank (V-14). 6. Reactor (Cooking) Unit (V-04 A/B) Consists of three reactors (55 tons each) that prepare the raw material for vacuum distillation and extract light naphtha compounds. • 6-1: Cooking Process: o 6-1-1: Catalyst System: Consists of two tanks. One prepares the catalyst mixture (1.5m dia, 4m H, 8mm carbon steel) with a mixer (MX-03) driven by a hydromotor and 1:40 gearbox. The second stores Gas Oil added to the preparation unit (1.5m dia, 1m H, 5mm carbon steel) with a 0.5 HP centrifugal pump. o 6-1-2: Reaction Tanks (V-04/05/06A): Three carbon steel tanks (2.8m dia, 9m L, 14mm thick, 55-ton max). Each has 2 Stainless Steel mixers (MX-02 A/B/C/D/E/F) driven by a 7.5 kW motor (1500 RPM) with a 1:40 gearbox. Contains an internal heating system powered by a Gas Oil burner to raise the temperature to 180°C. Catalyst is injected via dosing pumps (DP-01A/B) to increase naphtha extraction efficiency. Material is circulated during cooking by two centrifugal pumps per reactor (P-04A/B/C/D/E/F) (one active, one standby) to reduce retention time to 3-4 hours. After cooking, material is moved to the attached tank (V-04/05/06B) for storage before distillation. Fully insulated. o 6-1-3: Cooked Material Tank (V-04/05/06B): Carbon steel tank (2.8m dia, 9m L, 14mm thick) with thermal oil pipes to maintain 190-200°C. Fully insulated. Material is pumped to the vacuum distillation tower via centrifugal pumps (P-05A/B) (one active, one standby) at 22.5 kW / 3000 RPM. 7. Raw Naphtha Storage Unit Collects and condenses naphtha extracted during cooking. • 7-1-1: Raw Naphtha Tanks (V-07A/B/C): Three vertical Stainless Steel 304 tanks (1.5m dia, 5m H) connected to three heat exchangers and two pump pairs. Equipped internally with water spray nozzles on a ring pipe to wash non-condensable gases. • 7-1-2: Heat Exchangers (HE-01A/B/C): Condense naphtha vapors from 140°C down to 40°C using water from the cooling tower. Connected in series. Shell & Tube type, carbon steel (510 mm dia, 6m L) with 70 tubes (0.75-inch dia) in two rows of 35. Includes internal baffles for efficiency. • 7-1-3: Supporting Pumps: Vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM draw naphtha vapors from reactors to the heat exchangers, pushing non-condensable gases to the scrubber (V-14). Centrifugal pumps (P-02A/B) at 11.5 kW / 1500 RPM transport liquid raw naphtha to the Bleaching Unit. 8. Vacuum Distillation Unit The core of the plant, separating remaining light compounds and producing hard asphalt. • 8-1-1: Vacuum Distillation Tower: A vertical tower (~16m total height, 14mm carbon steel). Bottom section (Reboiler) is 3.5m dia x 1.2m H; top section is 1.5m dia x 12m H. Fully insulated. Fed with cooked material at 190-200°C via pumps (P-05A/B). To start extraction (remaining naphtha, Gas Oil, diesel), temperature is raised to 240-250°C using Heating Coil 1 via pumps (P-08A/B) at 55 kW / 3000 RPM, with continuous circulation via pumps (P-07A/B). Vacuum pumps (VP-03A/B) maintain 0.3-0.5 mbar pressure. Light compounds are extracted, condensed (HE-02A/B/C), and stored (V-08/09/10 A/B) over 2.5-3 hours. Afterward, material is heated via Heating Coil 2 to 320-340°C to finalize extraction and produce hard bitumen. Product is extracted via pumps (P-07A/B) at ~320°C, cooled via cooling tower coils, and sent to final tanks (V-18A/B/C). Batch processing takes 6-7 hours daily; continuous operation is possible. • 8-1-2: Supporting Pumps: Vacuum pumps (VP-03A/B) at 5.5 kW / 3000 RPM draw light vapors for condensation. Circulation centrifugal pumps (P-08A/B) at 55 kW move hot material to heating coils; (P-07A/B) circulate material and pump final bitumen product. • 8-1-3: Heating Coils 1 & 2: Carbon steel 4-inch diameter coils heated externally by a Gas Oil burner. Connected in series to heat liquid bitumen in two stages to prevent degradation. • 8-2: Heat Exchangers (HE-02A/B/C): Condense light compound vapors from 240°C to 40°C. Shell & Tube type, carbon steel (600 mm dia, 6m L) with 80 tubes (1-inch dia) in two rows of 40, equipped with baffles. • 8-3: Light Compound Tanks (V-08A/B, V-09A/B, V-10A/B): Six horizontal carbon steel tanks (1.5m dia, 4.5m L, 14mm thick). Receive condensates, linked to heat exchangers and vacuum pumps. Liquids are pumped to the Bleaching Unit via centrifugal pumps (P-06A/B) at 7.5 kW / 1500 RPM. 9. Bleaching Unit Improves the specifications of raw light compounds for local use and marketing. • 9-1: Collection Tank (V-11): Horizontal carbon steel tank (1m dia, 2.5m L, 14mm thick) placed above the system to store and distribute light compounds to the bleaching columns. • 9-2: Bleaching Columns (V-12A/B/C): Three vertical carbon steel vessels (1m dia, 4.5m H, 14mm thick). Contain a 15 cm catalyst layer on trays to bleach raw liquids into high-quality compounds, collected in a bottom horizontal tank. The catalyst is a calcined mixture of Bentonite and Zinc Oxide granules (2-3 mm) homogenized in water, which can be reactivated with steam and 5% HCl. • 9-3: Supporting Pumps: Vacuum pumps (VP-04A/B) at 5.5 kW extract vapors to the scrubber. Centrifugal pumps (P-09A/B) at 7.5 kW push bleached liquids to final tanks. 10. Production Tanks (V-13 A-F & V-18 A-C) • Light Products: Six horizontal carbon steel tanks (2.8m dia, 9m L, 55-ton capacity). V-13A/B for light naphtha, V-13C/D for Gas Oil, V-13E/F for diesel. • Asphalt: Three vertical carbon steel tanks (V-18A/B/C) (5m dia, 9m H). Equipped with thermal oil heating coils to keep asphalt liquid. Fully insulated (90 kg/m³ glass wool, 1.8mm aluminum cover). 11. Supporting Systems • 11-1: Gas Washing (Scrubber) System: Treats non-condensable gases before atmospheric release. Contains V-14 washing tank (1m dia, 2.8m L), a 500mm Flare stack with 3 ignitors, and a 1m x 1m LPG tank (V-15) for ignition. • 11-2: Cooling Tower: Provides cooling water for heat exchangers. Galvanized pressed steel basin (16m L x 2.4m W x 2.8m H), FRP casing, top fans, water distributors, and fill media. Includes Accumulator tank V-20 (1.5m dia, 2m L) and 11 kW pushing pumps (P-14A/B). • 11-3: Thermal Oil Boilers: Includes oil tank, heating boiler, oil pumps, and heating accelerators. • 11-4: Distillation Tower Raw Boilers • 11-5: Power Generation System • 11-6: Production Laboratory • 11-7: Control and Operation Room • 11-8: Catalyst System: Contains a vertical diesel tank (1m dia, 1.5m H) with a 1 kW centrifugal pump (P-11). Two vertical carbon steel tanks (V-17A/B, 1.5m dia, 4.5m H) with an MX-03 hydromotor mixer (7.5 kW, 30 RPM). V-17A is for preparation, V-17B pumps catalyst to the reactor. ________________________________________ Catalyst Chemical Components & Formulations 1. Alumina (Al2O3): Enhances the cracking of chemical bonds in heavy bitumen chains and increases Gas Oil extraction yield. 2. Manganese Dioxide (MnO2): Accelerates the reaction, reduces reaction time, and acts as a gasoline improver. 3. Silicon Dioxide (SiO2): Increases acceleration and reduces reaction time. 4. Iron Oxides (Fe2O): Accelerates the reaction, prevents pipe corrosion, and stops sulfur and wax from sticking to pipes and pumps. Weight Ratios (WT/WT) to Produce One Barrel (200 Liters) of Catalyst: 1. Alumina: Varies by feed: 2-2.5% for Bitumen / 4-5% for Vacuum Residue (VR) / 2-2.5% for Heavy Fuel Oil (HFO). To increase Gas Oil/Diesel (Light fuel) yield, Alumina can be added up to a maximum of 10%. 2. Manganese Dioxide: 2-2.5% for HFO / 4-5% for VR and Bitumen. 3. Iron Oxides: 2-2.5% across all feeds. 4. Silicon Dioxide: 2-2.5% for HFO / 4-5% for Bitumen and VR. 5. Remaining Volume: Filled with C-oil. Note: One barrel (200 Liters) of this mixture is added for every 5 tons of HFO, VR, or Bitumen. Manufacturing Mechanism: All components are placed in a tank, initially mixed with water, and heated to 80-120°C with continuous mixing (20-30 RPM). Once foam is generated, the product is allowed to cool to 80°C. The heating process up to 120°C is repeated 3 or 4 times until foaming ceases. Finally, the temperature is raised to 150°C, and the mixture is topped off to 200 liters using C-oil. To further improve light compound specifications, Zinc Oxide (300 grams) is mixed with 20 kg of Bentonite in C-oil. This is added alongside the catalyst at a ratio of 1/5 barrel of catalyst added to the reactor.
010
Hero
{ "prompt_type": "descriptive_replication", "reference_adherence": "STRICT_VISUAL_FIDELITY", "aspect_ratio": "4:5", "style": "1990s compact digital camera aesthetic with harsh on‑camera flash, grainy texture, washed‑out colors, high contrast, subtle chromatic aberration and halation. NO HDR, NO tone mapping, NO modern digital processing. The image looks like a raw, unedited flash photograph taken at night in a luxury modern interior (a penthouse or study), using an early digital point‑and‑shoot (e.g., Kodak DC series, Sony Mavica). The flash is the main light source – it creates deep, sharp shadows and overexposed highlights, the classic 'deer‑in‑headlights' effect. Background details are heavily darkened but faintly visible (dark wooden shelves, a leather chair, a window with city lights). Ultra‑realistic skin texture (on hands/arms), visible pores, fabric grain, metal reflections – all rendered with natural grain and no smoothing. The composition is slightly tilted, with a slight vertical banding artifact (CCD readout noise), a micro‑scratch on the lens (barely visible in lower right), and a subtle vignette with a faint greenish‑purple color shift at the edges – all adding authentic 90s digital camera character. The scene is dark, moody, powerful, with a raw, criminal‑luxury atmosphere.", "character": { "identity": "Wealthy mysterious man (Welison), early 30s, athletic build, broad shoulders, dominant posture. Bare chested (or wearing a black fitted t‑shirt?), but from previous descriptions often bare chested to show tattoo. However, holding a MacBook and money might be better with a black tactical top. But we can keep the bare chest / open jacket style. I'll make him wear a black ribbed sleeveless top (or bare chest with tactical trousers) to show the chest tattoo. Let's use a black sleeveless compression top to keep consistent with earlier 'tactical' look, but also allow the tattoo to be visible? Actually, the tattoo is on the upper chest – if he's holding items in both hands, his chest might be exposed. I'll describe him wearing a black tailored jacket (unbuttoned) or just bare chest? To avoid overcomplicating, I'll use a black fitted vest (tactical) that leaves arms and upper chest exposed, so the tattoo can be seen. Or simply bare chested with black trousers. Let's go with bare chested (as in many previous prompts) to show the tattoo.", "face_and_head": { "visibility": "completely obscured by a black ribbed balaclava (full‑face coverage, no openings) with a metallic silver‑grey embroidered Masonic pattern (all‑seeing eye, pyramid, geometric symbols). Over the balaclava, rectangular gold‑frame sunglasses (semi‑rimless, dark grey gradient lenses, Masonic logo on left lens)." }, "torso_and_tattoo": { "description": "Bare chest, slightly sweaty. Large tattoo on center chest in Chicano‑smoke style: dark clouds, swirling smoke, soft waves merging into skin. In the center, the word 'ШРЕДЕР' in a bold calligraphic brushstroke style with a thin white double outline, creating a subtle glow. Below the text, a Masonic pyramid with an all‑seeing eye and geometric symbols." }, "necklace": "Thick, heavy moissanite chain, Cuban link weave, spelling 'SHREDE1RR' with large letters, hanging onto bare chest.", "clothing": { "description": "Bare chested. Black tailored trousers (slim fit, low waist), black leather belt, barefoot or black shoes (not visible)." }, "hands_and_props": { "left_hand": "Holding a silver MacBook laptop (closed or slightly open? Preferably closed, held flat or at an angle). The MacBook screen is dark, the aluminum body reflects the flash with bright specular highlights.", "right_hand": "Holding a very thick stack of 50‑euro banknotes (approx. 10‑12 cm thick, tightly bound with a white or yellow rubber band). The notes are crisp, the flash catches the holograms and the edge details, euro symbol visible on the top note.", "pose": "Standing facing the camera directly, centered, slightly low angle. Arms slightly bent, holding both items at waist or chest level. The MacBook is held horizontally by the left hand (like a tray), the money stack is held vertically or slightly tilted in the right hand, showing the thickness. The pose is dominant, wealthy, controlling." } }, "environment": { "setting": "Luxury modern penthouse study at night. Dark wooden shelves with books and abstract sculptures, a large leather armchair in the background, a window revealing faint city lights (completely darkened by flash). The desk is polished black glass, barely visible. The atmosphere is opulent and secretive.", "background": { "description": "Very dark, almost black, with faint outlines of bookshelves and a window. A single dim light source (overpowered) but not visible. The flash creates a bright circular hotspot directly behind the subject, fading to black edges." } }, "lighting_and_atmosphere": { "source": "ON‑CAMERA FLASH ONLY (early 1990s compact digital camera). No other light sources. This is NOT HDR.", "quality": "extremely harsh, high contrast, overexposed highlights on the MacBook aluminum body, the white rubber band on the money, the gold sunglasses, the moissanite chain, and the specular highlights on the sweaty skin.", "effects": [ "strong, direct flash creating hard highlights on the MacBook casing (silver reflections), on the euro banknotes holograms, and on the glossy surfaces", "the white double outline of the tattoo reflects the flash with a faint glow", "background completely black – no details visible except faint outlines", "grainy texture typical of early digital compacts (heavy grain in shadows, fine grain in highlights)", "washed out colors, skin tones pale with a slight blue/green cast from the flash", "extremely high contrast – bright whites (MacBook, money edge) next to deep blacks", "subtle chromatic aberration (purple/green fringing) on high‑contrast edges (MacBook corners, sunglasses, banknotes edges)", "slight barrel distortion, lens flare (small circular artifacts from the flash)", "vertical banding artifact (CCD readout noise) visible in the dark background", "a micro‑scratch on the lens in the lower right corner", "subtle greenish‑purple vignette at the edges" ], "color_cast": "cool white balance (slightly blue/green), typical of early digital flashes. The MacBook silver appears with a cool tint, the money is pale greenish‑yellow, skin pale.", "contrast": "extremely high (maximum)" }, "camera_and_technical": { "perspective": "Straight‑on, eye level, centered composition. Medium shot (from mid‑chest to above head). Camera distance ~1.5‑2 m.", "camera_position": "handheld, compact digital camera from early 1990s (e.g., Kodak DC series, Sony Mavica), 35mm equivalent, fixed focus or autofocus with slight softness, aperture f/2.8‑f/4, shutter speed 1/60s, ISO 200‑400 with heavy grain.", "framing": "vertical 4:5, medium shot, subject perfectly centered, slight tilt (~2‑3°), a small intruding element (a strap or finger) in the upper left corner, a micro‑scratch on the lens in lower right.", "focus": "slightly soft, typical of flash photography, the face (mask) and the items (MacBook, money) are relatively sharp, background out of focus and black.", "visual_fidelity": "grainy, low resolution aesthetic, harsh flash, no HDR, no tone mapping, ultra high quality real image (realistic because of imperfections), candid snapshot with authentic 1990s compact camera feel." }, "realism_constraints": { "allowed": [ "grain", "washed out colors", "overexposed highlights", "harsh shadows with no detail", "pitch black background", "imperfect composition (slight tilt, intruding element, lens micro‑scratch, vertical banding, vignette)", "natural skin texture on arms and chest (pores, sweat beads, muscle)", "visible carbon fiber weave (mask), aluminum texture (MacBook), paper texture (money)", "chromatic aberration", "barrel distortion", "lens flare" ], "forbidden": [ "HDR", "tone mapping", "dynamic range compression", "lifted shadows", "detail in shadows", "soft lighting", "multiple light sources", "fill light", "ambient light visible (except faint outlines)", "even exposure", "balanced lighting", "modern digital perfection", "sharp focus (clinical)", "perfect composition", "cinematic look", "8k", "masterpiece", "airbrushed skin", "plastic skin", "CGI", "3d render", "stylized", "smartphone HDR", "deep fusion", "smart HDR", "visible brand logos (except Apple on MacBook? that's fine but we can ignore)", "any facial features visible through mask", "skin on face or neck", "matte plastic mask" ] }, "negative_prompt": [ "different character", "face visible", "facial features", "eyes visible", "mouth visible", "skin on face", "skin on neck", "beauty filters", "airbrushed skin", "anime", "cartoon", "over-sharpening", "clean digital look", "perfect exposure", "smooth gradients", "messy appearance", "greasy skin", "overexposed (beyond intended aesthetic)", "HDR", "tone mapping", "dynamic range", "lifted shadows", "detail in shadows", "soft lighting", "fill light", "ambient light", "even exposure", "balanced lighting", "CGI", "3d render", "plastic texture (except carbon fiber mask)", "smooth", "airbrushed", "digital art", "painting", "deformed hands", "extra fingers", "missing fingers", "blurry (beyond intentional soft focus)", "low detail", "unrealistic proportions", "bad anatomy", "watermark", "signature", "professional photography", "studio lighting (modern softbox)", "sharp focus (clinical)", "perfect composition", "cinematic (modern)", "8k", "masterpiece", "stylized", "modern digital", "natural light (flash must dominate)", "golden hour", "teal and orange", "warm tones", "iPhone", "LED flash (only 1990s compact camera flash)", "modern smartphone", "daylight", "no flash look", "bright background", "detailed background", "left hand not holding MacBook", "right hand not holding money", "MacBook open", "money scattered" ] }
09
Nano Banana
"Behold a marvel of design—an egg-shaped tent structure that emanates an ethereal glow, inviting you into its enchanting realm. Crafted from a lightweight aluminum framework, this innovative structure features flexible rods that bend and contour effortlessly. The framework forms a circular base and a smaller circle at the top, seamlessly connected by vertical rods that resemble the ribs of an egg. The entire ovoid structure is cloaked in a resilient fabric, specifically chosen for its suitability in tent and canopy construction. The fabric elegantly envelopes the entire surface of the egg-shaped tent, accentuating the seamless and organic form of the structure. Not a single curve or contour is left untouched, as the fabric adheres flawlessly to every edge and fold. The fabric embraces the tent with a gentle embrace, creating an alluring presence that emphasizes its resemblance to a magnificent hatching egg. Step through the grand entrance, and you will discover a world of tranquility and wonder. Inside, there is only emptiness, illuminated by a soft, ambient light that bathes the interior with a serene glow. The absence of physical objects accentuates the sense of spaciousness and invites a deep sense of introspection. The space becomes a sanctuary for personal reflection and connection with oneself. As you gaze upon this remarkable structure, it seamlessly integrates with the natural surroundings, becoming a harmonious element of the landscape. The fabric-covered egg-shaped tent stands as a testament to human ingenuity, offering a captivating and immersive experience. Its exterior showcases the gentle glow that emanates from within, captivating all who behold its beauty. The size of the tent, with its complete coverage and ovoid structure, is designed for a single occupant, providing an intimate and personal space for solace and reflection. The lightweight aluminum framework, meticulously designed, forms a circular base and a smaller circle at the top, with vertical rods extending from the upper ring to the lower one, connecting them to shape the rib-like structure of the egg. Step through the open entrance, and you will enter a sanctuary of serenity, where the only companions are the soft glow and the empty expanse. Allow the encompassing light and the tranquil haven to embrace you, as you embark on a journey of introspection and connection within the allure of this egg-shaped tent."
0117
DreamShaper
"Behold a marvel of design—an egg-shaped tent structure that emanates an ethereal glow, inviting you into its enchanting realm. Crafted from a lightweight aluminum framework, this innovative structure features flexible rods that bend and contour effortlessly. The framework forms a circular base and a smaller circle at the top, seamlessly connected by vertical rods that resemble the ribs of an egg. The entire ovoid structure is cloaked in a resilient fabric, specifically chosen for its suitability in tent and canopy construction. The fabric elegantly envelopes the entire surface of the egg-shaped tent, accentuating the seamless and organic form of the structure. Not a single curve or contour is left untouched, as the fabric adheres flawlessly to every edge and fold. The fabric embraces the tent with a gentle embrace, creating an alluring presence that emphasizes its resemblance to a magnificent hatching egg. Step through the grand entrance, and you will discover a world of tranquility and wonder. Inside, there is only emptiness, illuminated by a soft, ambient light that bathes the interior with a serene glow. The absence of physical objects accentuates the sense of spaciousness and invites a deep sense of introspection. The space becomes a sanctuary for personal reflection and connection with oneself. As you gaze upon this remarkable structure, it seamlessly integrates with the natural surroundings, becoming a harmonious element of the landscape. The fabric-covered egg-shaped tent stands as a testament to human ingenuity, offering a captivating and immersive experience. Its exterior showcases the gentle glow that emanates from within, captivating all who behold its beauty. The size of the tent, with its complete coverage and ovoid structure, is designed for a single occupant, providing an intimate and personal space for solace and reflection. The lightweight aluminum framework, meticulously designed, forms a circular base and a smaller circle at the top, with vertical rods extending from the upper ring to the lower one, connecting them to shape the rib-like structure of the egg. Step through the open entrance, and you will enter a sanctuary of serenity, where the only companions are the soft glow and the empty expanse. Allow the encompassing light and the tranquil haven to embrace you, as you embark on a journey of introspection and connection within the allure of this egg-shaped tent."
0104
DreamShaper
generate this business card: Layout 1: Modern Minimalist Colors: Primarily Atlantic Blue and Aluminum Snow. Layout:Left Side: Professional headshot in a circular or square frame. Right Side:Company Name: "SAFETY COMPLIANCE PROS" in bold, sans-serif font. Personal Name in a slightly smaller, sans-serif font. Contact information icons aligned vertically: Email icon Phone icon Location icon Geometric Corner Shape: A geometric shape in Aluminum Snow, placed at the top right corner of the card.
081
FLUX
Specialized Bitumen Refining Plant Governorate: Anbar / Hit District Production Capacity: ( ) Tons/Day The city of Hit in the Anbar Governorate is considered one of the most famous areas in the world for its natural "bitumen springs," which have been used for thousands of years (dating back to the Babylonian and Assyrian eras). However, processing this bitumen for modern use requires technical steps to transform it from a raw material into a viable product for construction or industrial applications. Bitumen emerges from these springs as a highly viscous liquid mixed with sulfurous water, salts, and mud impurities. This "Natural Asphalt" differs from petroleum bitumen produced in refineries, and it can also appear in the form of rocky or spongy blocks mixed with mud. To obtain industrially usable products from this bitumen, specifically for: 1. Waterproofing (Felt/Membranes): Considered one of the best coating materials for building foundations to prevent moisture leakage due to its high resistance to hydrolysis. 2. Road Paving: Mixed with gravel and sand to produce asphalt concrete. It is characterized by exceptionally high cohesive strength compared to industrial bitumen. The natural bitumen from these springs must undergo several fundamental processing stages to become industrially viable: 1. Collection and Sedimentation: Bitumen is collected from the springs or quarry sites and left in designated basins to allow the sulfurous water to naturally separate (due to density differences). 2. Primary Heating: The raw bitumen is placed in large boilers to: a. Evaporate the remaining water. b. Reduce viscosity for easier handling. 3. Filtration and Purification: The heated bitumen is screened to remove solid impurities such as gravel, dirt, and suspended organic matter. 4. Secondary Heating and Cooking: The temperature of the bitumen is raised, improving agents are added, and it is prepared for the vacuum distillation process. 5. Vacuum Distillation: The distillation process is conducted under low pressure (vacuum pressure), which allows for: a. The separation of light oils and volatile substances at lower temperatures. b. The production of highly pure "Hard Asphalt," which is highly demanded in the construction industry. ________________________________________ Plant Components and Operational Stages The specialized bitumen plant for processing raw natural bitumen (in both liquid and solid states) consists of a range of specialized equipment designed according to the latest international standards. This equipment aligns with the technical and engineering requirements for bitumen products, complies with Iraqi standard specifications, and adheres to environmental considerations in the Anbar Governorate. 1. Extraction Stage The raw material (solid or liquid) is extracted from quarries designated by the Geological Survey Authority using specialized mechanical equipment. It is stored in stocks or special basins for solid materials, then transported to the refinery site using specialized transport vehicles of various capacities. 2. Storage Stage The raw materials are stored in designated yards to ensure a sufficient inventory for continuous, uninterrupted production for no less than 7 working days. 3. Raw Material Preparation and Primary Heating Stage Raw materials are fed into the plant via hydraulic lifts. This stage includes: • 3-1: Crushing and Digestion: Solid raw materials from the quarries are broken down and digested using a digester (SH-01) equipped with double blades driven by hydraulic motors (22.5 kW capacity). The digester is 5 meters long and 1.80 meters in diameter, made of carbon steel, with Stainless Steel 304 blades. It includes a Stainless Steel piston driven by a 7.5 kW electric motor. • 3-2: Primary Heating: This melts the bitumen and improves pumpability through pipes and pumps. • 3-3: Efficiency Enhancement: To increase melting efficiency, Gas Oil is added to the primary heating basin at a ratio of 1:5 per ton of solid raw material entering the basin (this ratio decreases when using liquid raw bitumen). o 3-2-1: Primary Melting Basin (TK-01): Raw material is heated in a concrete tank (25m L x 5m W x 3m H) with a maximum storage capacity of 300 tons. Heating pipes circulate thermal fluid (oil) at 125°C, with a retention time of 4-6 hours. The tank is internally lined with 6-8 mm carbon steel plates to protect the heating pipes from corrosion. It contains 8 Stainless Steel 304 mixers (MX-01 A/B/C/D/E/F) driven by 7.5 kW electric motors (50 RPM) and gearboxes (1:60 ratio) to mix the material, increase heating efficiency, reduce retention time, and circulate the melted bitumen to eliminate dissolved water, resulting in a homogeneous melt. Covered with a carbon steel roof with service hatches, it connects to an air duct (30x60 cm) linked to 2 air blowers (AB-01A/B) (one operating, one standby) at 22.5 kW / 1500 RPM. These extract water vapor and sulfur fumes, sending them to a scrubber before atmospheric release and water recycling. o 3-2-2: Primary Collection Tank (V-01): A carbon steel tank (12-14 mm thick) with a maximum capacity of 125 tons (10m L x 5m W x 3m H). It connects directly to the primary tank (TK-01) via channels and movable gates to receive only liquid raw material. It contains thermal oil pipes to maintain the liquid raw material at 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum outer cover. Impurities larger than 35 mm are removed and collected in a waste tank. o 3-2-3: Screw Conveyors (SC-01 A/B): Carbon steel screw conveyors with a double-jacketed outer cover filled with thermal oil to maintain the 140°C temperature. Driven by 22.5 kW electric motors (3000 RPM) with 1:40 gearboxes, they transport the liquid raw material to the preliminary filtration unit. 4. Purification Unit Removes suspended impurities from the liquid raw material in two stages: • 4-1: Preliminary Purification Tank (V-02): A carbon steel tank (12-14 mm thick, 125-ton capacity, 5m L x 10m W x 3m H). Receives liquid raw material from the primary collection tank. Contains thermal oil pipes to maintain 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Impurities larger than 15 mm are removed to a waste tank. Material is pumped to the final filtration stage via gear pumps (GP-01 A/B) (one operating, one standby) at 22.5 kW / 1000 RPM. • 4-2: Final Filtration Unit (FT-01): Removes remaining impurities by passing liquids through box filters arranged in 2 trains (8 per train). They feature a two-layer Stainless Steel filter mesh (specified microns) wrapped around square boxes. Liquid enters from the outside, and pure liquid is collected from the inside via a pipe network connected to a manifold. This is driven by two vacuum pumps (VP-01A/B) connected to the raw material tanks. 5. Raw Material Tanks (V-03 A-J) Ten carbon steel tanks (2.5m diameter, 9m length, 14 mm thickness, 45-ton max capacity) equipped with thermal oil heating coils. They receive, store, and prepare the purified raw material for the subsequent cooking reaction. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Connected by a pipe/valve network, the material is pumped via two centrifugal pumps (P-01 A/B) at 22.5 kW / 3000 RPM to the reactor unit. The tanks connect to a pipe network driven by vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM, pushing heating gases and vapors to the gas washing tank (V-14). 6. Reactor (Cooking) Unit (V-04 A/B) Consists of three reactors (55 tons each) that prepare the raw material for vacuum distillation and extract light naphtha compounds. • 6-1: Cooking Process: o 6-1-1: Catalyst System: Consists of two tanks. One prepares the catalyst mixture (1.5m dia, 4m H, 8mm carbon steel) with a mixer (MX-03) driven by a hydromotor and 1:40 gearbox. The second stores Gas Oil added to the preparation unit (1.5m dia, 1m H, 5mm carbon steel) with a 0.5 HP centrifugal pump. o 6-1-2: Reaction Tanks (V-04/05/06A): Three carbon steel tanks (2.8m dia, 9m L, 14mm thick, 55-ton max). Each has 2 Stainless Steel mixers (MX-02 A/B/C/D/E/F) driven by a 7.5 kW motor (1500 RPM) with a 1:40 gearbox. Contains an internal heating system powered by a Gas Oil burner to raise the temperature to 180°C. Catalyst is injected via dosing pumps (DP-01A/B) to increase naphtha extraction efficiency. Material is circulated during cooking by two centrifugal pumps per reactor (P-04A/B/C/D/E/F) (one active, one standby) to reduce retention time to 3-4 hours. After cooking, material is moved to the attached tank (V-04/05/06B) for storage before distillation. Fully insulated. o 6-1-3: Cooked Material Tank (V-04/05/06B): Carbon steel tank (2.8m dia, 9m L, 14mm thick) with thermal oil pipes to maintain 190-200°C. Fully insulated. Material is pumped to the vacuum distillation tower via centrifugal pumps (P-05A/B) (one active, one standby) at 22.5 kW / 3000 RPM. 7. Raw Naphtha Storage Unit Collects and condenses naphtha extracted during cooking. • 7-1-1: Raw Naphtha Tanks (V-07A/B/C): Three vertical Stainless Steel 304 tanks (1.5m dia, 5m H) connected to three heat exchangers and two pump pairs. Equipped internally with water spray nozzles on a ring pipe to wash non-condensable gases. • 7-1-2: Heat Exchangers (HE-01A/B/C): Condense naphtha vapors from 140°C down to 40°C using water from the cooling tower. Connected in series. Shell & Tube type, carbon steel (510 mm dia, 6m L) with 70 tubes (0.75-inch dia) in two rows of 35. Includes internal baffles for efficiency. • 7-1-3: Supporting Pumps: Vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM draw naphtha vapors from reactors to the heat exchangers, pushing non-condensable gases to the scrubber (V-14). Centrifugal pumps (P-02A/B) at 11.5 kW / 1500 RPM transport liquid raw naphtha to the Bleaching Unit. 8. Vacuum Distillation Unit The core of the plant, separating remaining light compounds and producing hard asphalt. • 8-1-1: Vacuum Distillation Tower: A vertical tower (~16m total height, 14mm carbon steel). Bottom section (Reboiler) is 3.5m dia x 1.2m H; top section is 1.5m dia x 12m H. Fully insulated. Fed with cooked material at 190-200°C via pumps (P-05A/B). To start extraction (remaining naphtha, Gas Oil, diesel), temperature is raised to 240-250°C using Heating Coil 1 via pumps (P-08A/B) at 55 kW / 3000 RPM, with continuous circulation via pumps (P-07A/B). Vacuum pumps (VP-03A/B) maintain 0.3-0.5 mbar pressure. Light compounds are extracted, condensed (HE-02A/B/C), and stored (V-08/09/10 A/B) over 2.5-3 hours. Afterward, material is heated via Heating Coil 2 to 320-340°C to finalize extraction and produce hard bitumen. Product is extracted via pumps (P-07A/B) at ~320°C, cooled via cooling tower coils, and sent to final tanks (V-18A/B/C). Batch processing takes 6-7 hours daily; continuous operation is possible. • 8-1-2: Supporting Pumps: Vacuum pumps (VP-03A/B) at 5.5 kW / 3000 RPM draw light vapors for condensation. Circulation centrifugal pumps (P-08A/B) at 55 kW move hot material to heating coils; (P-07A/B) circulate material and pump final bitumen product. • 8-1-3: Heating Coils 1 & 2: Carbon steel 4-inch diameter coils heated externally by a Gas Oil burner. Connected in series to heat liquid bitumen in two stages to prevent degradation. • 8-2: Heat Exchangers (HE-02A/B/C): Condense light compound vapors from 240°C to 40°C. Shell & Tube type, carbon steel (600 mm dia, 6m L) with 80 tubes (1-inch dia) in two rows of 40, equipped with baffles. • 8-3: Light Compound Tanks (V-08A/B, V-09A/B, V-10A/B): Six horizontal carbon steel tanks (1.5m dia, 4.5m L, 14mm thick). Receive condensates, linked to heat exchangers and vacuum pumps. Liquids are pumped to the Bleaching Unit via centrifugal pumps (P-06A/B) at 7.5 kW / 1500 RPM. 9. Bleaching Unit Improves the specifications of raw light compounds for local use and marketing. • 9-1: Collection Tank (V-11): Horizontal carbon steel tank (1m dia, 2.5m L, 14mm thick) placed above the system to store and distribute light compounds to the bleaching columns. • 9-2: Bleaching Columns (V-12A/B/C): Three vertical carbon steel vessels (1m dia, 4.5m H, 14mm thick). Contain a 15 cm catalyst layer on trays to bleach raw liquids into high-quality compounds, collected in a bottom horizontal tank. The catalyst is a calcined mixture of Bentonite and Zinc Oxide granules (2-3 mm) homogenized in water, which can be reactivated with steam and 5% HCl. • 9-3: Supporting Pumps: Vacuum pumps (VP-04A/B) at 5.5 kW extract vapors to the scrubber. Centrifugal pumps (P-09A/B) at 7.5 kW push bleached liquids to final tanks. 10. Production Tanks (V-13 A-F & V-18 A-C) • Light Products: Six horizontal carbon steel tanks (2.8m dia, 9m L, 55-ton capacity). V-13A/B for light naphtha, V-13C/D for Gas Oil, V-13E/F for diesel. • Asphalt: Three vertical carbon steel tanks (V-18A/B/C) (5m dia, 9m H). Equipped with thermal oil heating coils to keep asphalt liquid. Fully insulated (90 kg/m³ glass wool, 1.8mm aluminum cover). 11. Supporting Systems • 11-1: Gas Washing (Scrubber) System: Treats non-condensable gases before atmospheric release. Contains V-14 washing tank (1m dia, 2.8m L), a 500mm Flare stack with 3 ignitors, and a 1m x 1m LPG tank (V-15) for ignition. • 11-2: Cooling Tower: Provides cooling water for heat exchangers. Galvanized pressed steel basin (16m L x 2.4m W x 2.8m H), FRP casing, top fans, water distributors, and fill media. Includes Accumulator tank V-20 (1.5m dia, 2m L) and 11 kW pushing pumps (P-14A/B). • 11-3: Thermal Oil Boilers: Includes oil tank, heating boiler, oil pumps, and heating accelerators. • 11-4: Distillation Tower Raw Boilers • 11-5: Power Generation System • 11-6: Production Laboratory • 11-7: Control and Operation Room • 11-8: Catalyst System: Contains a vertical diesel tank (1m dia, 1.5m H) with a 1 kW centrifugal pump (P-11). Two vertical carbon steel tanks (V-17A/B, 1.5m dia, 4.5m H) with an MX-03 hydromotor mixer (7.5 kW, 30 RPM). V-17A is for preparation, V-17B pumps catalyst to the reactor. ________________________________________ Catalyst Chemical Components & Formulations 1. Alumina (Al2O3): Enhances the cracking of chemical bonds in heavy bitumen chains and increases Gas Oil extraction yield. 2. Manganese Dioxide (MnO2): Accelerates the reaction, reduces reaction time, and acts as a gasoline improver. 3. Silicon Dioxide (SiO2): Increases acceleration and reduces reaction time. 4. Iron Oxides (Fe2O): Accelerates the reaction, prevents pipe corrosion, and stops sulfur and wax from sticking to pipes and pumps. Weight Ratios (WT/WT) to Produce One Barrel (200 Liters) of Catalyst: 1. Alumina: Varies by feed: 2-2.5% for Bitumen / 4-5% for Vacuum Residue (VR) / 2-2.5% for Heavy Fuel Oil (HFO). To increase Gas Oil/Diesel (Light fuel) yield, Alumina can be added up to a maximum of 10%. 2. Manganese Dioxide: 2-2.5% for HFO / 4-5% for VR and Bitumen. 3. Iron Oxides: 2-2.5% across all feeds. 4. Silicon Dioxide: 2-2.5% for HFO / 4-5% for Bitumen and VR. 5. Remaining Volume: Filled with C-oil. Note: One barrel (200 Liters) of this mixture is added for every 5 tons of HFO, VR, or Bitumen. Manufacturing Mechanism: All components are placed in a tank, initially mixed with water, and heated to 80-120°C with continuous mixing (20-30 RPM). Once foam is generated, the product is allowed to cool to 80°C. The heating process up to 120°C is repeated 3 or 4 times until foaming ceases. Finally, the temperature is raised to 150°C, and the mixture is topped off to 200 liters using C-oil. To further improve light compound specifications, Zinc Oxide (300 grams) is mixed with 20 kg of Bentonite in C-oil. This is added alongside the catalyst at a ratio of 1/5 barrel of catalyst added to the reactor.
019
Hero
Specialized Bitumen Refining Plant Governorate: Anbar / Hit District Production Capacity: ( ) Tons/Day The city of Hit in the Anbar Governorate is considered one of the most famous areas in the world for its natural "bitumen springs," which have been used for thousands of years (dating back to the Babylonian and Assyrian eras). However, processing this bitumen for modern use requires technical steps to transform it from a raw material into a viable product for construction or industrial applications. Bitumen emerges from these springs as a highly viscous liquid mixed with sulfurous water, salts, and mud impurities. This "Natural Asphalt" differs from petroleum bitumen produced in refineries, and it can also appear in the form of rocky or spongy blocks mixed with mud. To obtain industrially usable products from this bitumen, specifically for: 1. Waterproofing (Felt/Membranes): Considered one of the best coating materials for building foundations to prevent moisture leakage due to its high resistance to hydrolysis. 2. Road Paving: Mixed with gravel and sand to produce asphalt concrete. It is characterized by exceptionally high cohesive strength compared to industrial bitumen. The natural bitumen from these springs must undergo several fundamental processing stages to become industrially viable: 1. Collection and Sedimentation: Bitumen is collected from the springs or quarry sites and left in designated basins to allow the sulfurous water to naturally separate (due to density differences). 2. Primary Heating: The raw bitumen is placed in large boilers to: a. Evaporate the remaining water. b. Reduce viscosity for easier handling. 3. Filtration and Purification: The heated bitumen is screened to remove solid impurities such as gravel, dirt, and suspended organic matter. 4. Secondary Heating and Cooking: The temperature of the bitumen is raised, improving agents are added, and it is prepared for the vacuum distillation process. 5. Vacuum Distillation: The distillation process is conducted under low pressure (vacuum pressure), which allows for: a. The separation of light oils and volatile substances at lower temperatures. b. The production of highly pure "Hard Asphalt," which is highly demanded in the construction industry. ________________________________________ Plant Components and Operational Stages The specialized bitumen plant for processing raw natural bitumen (in both liquid and solid states) consists of a range of specialized equipment designed according to the latest international standards. This equipment aligns with the technical and engineering requirements for bitumen products, complies with Iraqi standard specifications, and adheres to environmental considerations in the Anbar Governorate. 1. Extraction Stage The raw material (solid or liquid) is extracted from quarries designated by the Geological Survey Authority using specialized mechanical equipment. It is stored in stocks or special basins for solid materials, then transported to the refinery site using specialized transport vehicles of various capacities. 2. Storage Stage The raw materials are stored in designated yards to ensure a sufficient inventory for continuous, uninterrupted production for no less than 7 working days. 3. Raw Material Preparation and Primary Heating Stage Raw materials are fed into the plant via hydraulic lifts. This stage includes: • 3-1: Crushing and Digestion: Solid raw materials from the quarries are broken down and digested using a digester (SH-01) equipped with double blades driven by hydraulic motors (22.5 kW capacity). The digester is 5 meters long and 1.80 meters in diameter, made of carbon steel, with Stainless Steel 304 blades. It includes a Stainless Steel piston driven by a 7.5 kW electric motor. • 3-2: Primary Heating: This melts the bitumen and improves pumpability through pipes and pumps. • 3-3: Efficiency Enhancement: To increase melting efficiency, Gas Oil is added to the primary heating basin at a ratio of 1:5 per ton of solid raw material entering the basin (this ratio decreases when using liquid raw bitumen). o 3-2-1: Primary Melting Basin (TK-01): Raw material is heated in a concrete tank (25m L x 5m W x 3m H) with a maximum storage capacity of 300 tons. Heating pipes circulate thermal fluid (oil) at 125°C, with a retention time of 4-6 hours. The tank is internally lined with 6-8 mm carbon steel plates to protect the heating pipes from corrosion. It contains 8 Stainless Steel 304 mixers (MX-01 A/B/C/D/E/F) driven by 7.5 kW electric motors (50 RPM) and gearboxes (1:60 ratio) to mix the material, increase heating efficiency, reduce retention time, and circulate the melted bitumen to eliminate dissolved water, resulting in a homogeneous melt. Covered with a carbon steel roof with service hatches, it connects to an air duct (30x60 cm) linked to 2 air blowers (AB-01A/B) (one operating, one standby) at 22.5 kW / 1500 RPM. These extract water vapor and sulfur fumes, sending them to a scrubber before atmospheric release and water recycling. o 3-2-2: Primary Collection Tank (V-01): A carbon steel tank (12-14 mm thick) with a maximum capacity of 125 tons (10m L x 5m W x 3m H). It connects directly to the primary tank (TK-01) via channels and movable gates to receive only liquid raw material. It contains thermal oil pipes to maintain the liquid raw material at 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum outer cover. Impurities larger than 35 mm are removed and collected in a waste tank. o 3-2-3: Screw Conveyors (SC-01 A/B): Carbon steel screw conveyors with a double-jacketed outer cover filled with thermal oil to maintain the 140°C temperature. Driven by 22.5 kW electric motors (3000 RPM) with 1:40 gearboxes, they transport the liquid raw material to the preliminary filtration unit. 4. Purification Unit Removes suspended impurities from the liquid raw material in two stages: • 4-1: Preliminary Purification Tank (V-02): A carbon steel tank (12-14 mm thick, 125-ton capacity, 5m L x 10m W x 3m H). Receives liquid raw material from the primary collection tank. Contains thermal oil pipes to maintain 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Impurities larger than 15 mm are removed to a waste tank. Material is pumped to the final filtration stage via gear pumps (GP-01 A/B) (one operating, one standby) at 22.5 kW / 1000 RPM. • 4-2: Final Filtration Unit (FT-01): Removes remaining impurities by passing liquids through box filters arranged in 2 trains (8 per train). They feature a two-layer Stainless Steel filter mesh (specified microns) wrapped around square boxes. Liquid enters from the outside, and pure liquid is collected from the inside via a pipe network connected to a manifold. This is driven by two vacuum pumps (VP-01A/B) connected to the raw material tanks. 5. Raw Material Tanks (V-03 A-J) Ten carbon steel tanks (2.5m diameter, 9m length, 14 mm thickness, 45-ton max capacity) equipped with thermal oil heating coils. They receive, store, and prepare the purified raw material for the subsequent cooking reaction. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Connected by a pipe/valve network, the material is pumped via two centrifugal pumps (P-01 A/B) at 22.5 kW / 3000 RPM to the reactor unit. The tanks connect to a pipe network driven by vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM, pushing heating gases and vapors to the gas washing tank (V-14). 6. Reactor (Cooking) Unit (V-04 A/B) Consists of three reactors (55 tons each) that prepare the raw material for vacuum distillation and extract light naphtha compounds. • 6-1: Cooking Process: o 6-1-1: Catalyst System: Consists of two tanks. One prepares the catalyst mixture (1.5m dia, 4m H, 8mm carbon steel) with a mixer (MX-03) driven by a hydromotor and 1:40 gearbox. The second stores Gas Oil added to the preparation unit (1.5m dia, 1m H, 5mm carbon steel) with a 0.5 HP centrifugal pump. o 6-1-2: Reaction Tanks (V-04/05/06A): Three carbon steel tanks (2.8m dia, 9m L, 14mm thick, 55-ton max). Each has 2 Stainless Steel mixers (MX-02 A/B/C/D/E/F) driven by a 7.5 kW motor (1500 RPM) with a 1:40 gearbox. Contains an internal heating system powered by a Gas Oil burner to raise the temperature to 180°C. Catalyst is injected via dosing pumps (DP-01A/B) to increase naphtha extraction efficiency. Material is circulated during cooking by two centrifugal pumps per reactor (P-04A/B/C/D/E/F) (one active, one standby) to reduce retention time to 3-4 hours. After cooking, material is moved to the attached tank (V-04/05/06B) for storage before distillation. Fully insulated. o 6-1-3: Cooked Material Tank (V-04/05/06B): Carbon steel tank (2.8m dia, 9m L, 14mm thick) with thermal oil pipes to maintain 190-200°C. Fully insulated. Material is pumped to the vacuum distillation tower via centrifugal pumps (P-05A/B) (one active, one standby) at 22.5 kW / 3000 RPM. 7. Raw Naphtha Storage Unit Collects and condenses naphtha extracted during cooking. • 7-1-1: Raw Naphtha Tanks (V-07A/B/C): Three vertical Stainless Steel 304 tanks (1.5m dia, 5m H) connected to three heat exchangers and two pump pairs. Equipped internally with water spray nozzles on a ring pipe to wash non-condensable gases. • 7-1-2: Heat Exchangers (HE-01A/B/C): Condense naphtha vapors from 140°C down to 40°C using water from the cooling tower. Connected in series. Shell & Tube type, carbon steel (510 mm dia, 6m L) with 70 tubes (0.75-inch dia) in two rows of 35. Includes internal baffles for efficiency. • 7-1-3: Supporting Pumps: Vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM draw naphtha vapors from reactors to the heat exchangers, pushing non-condensable gases to the scrubber (V-14). Centrifugal pumps (P-02A/B) at 11.5 kW / 1500 RPM transport liquid raw naphtha to the Bleaching Unit. 8. Vacuum Distillation Unit The core of the plant, separating remaining light compounds and producing hard asphalt. • 8-1-1: Vacuum Distillation Tower: A vertical tower (~16m total height, 14mm carbon steel). Bottom section (Reboiler) is 3.5m dia x 1.2m H; top section is 1.5m dia x 12m H. Fully insulated. Fed with cooked material at 190-200°C via pumps (P-05A/B). To start extraction (remaining naphtha, Gas Oil, diesel), temperature is raised to 240-250°C using Heating Coil 1 via pumps (P-08A/B) at 55 kW / 3000 RPM, with continuous circulation via pumps (P-07A/B). Vacuum pumps (VP-03A/B) maintain 0.3-0.5 mbar pressure. Light compounds are extracted, condensed (HE-02A/B/C), and stored (V-08/09/10 A/B) over 2.5-3 hours. Afterward, material is heated via Heating Coil 2 to 320-340°C to finalize extraction and produce hard bitumen. Product is extracted via pumps (P-07A/B) at ~320°C, cooled via cooling tower coils, and sent to final tanks (V-18A/B/C). Batch processing takes 6-7 hours daily; continuous operation is possible. • 8-1-2: Supporting Pumps: Vacuum pumps (VP-03A/B) at 5.5 kW / 3000 RPM draw light vapors for condensation. Circulation centrifugal pumps (P-08A/B) at 55 kW move hot material to heating coils; (P-07A/B) circulate material and pump final bitumen product. • 8-1-3: Heating Coils 1 & 2: Carbon steel 4-inch diameter coils heated externally by a Gas Oil burner. Connected in series to heat liquid bitumen in two stages to prevent degradation. • 8-2: Heat Exchangers (HE-02A/B/C): Condense light compound vapors from 240°C to 40°C. Shell & Tube type, carbon steel (600 mm dia, 6m L) with 80 tubes (1-inch dia) in two rows of 40, equipped with baffles. • 8-3: Light Compound Tanks (V-08A/B, V-09A/B, V-10A/B): Six horizontal carbon steel tanks (1.5m dia, 4.5m L, 14mm thick). Receive condensates, linked to heat exchangers and vacuum pumps. Liquids are pumped to the Bleaching Unit via centrifugal pumps (P-06A/B) at 7.5 kW / 1500 RPM. 9. Bleaching Unit Improves the specifications of raw light compounds for local use and marketing. • 9-1: Collection Tank (V-11): Horizontal carbon steel tank (1m dia, 2.5m L, 14mm thick) placed above the system to store and distribute light compounds to the bleaching columns. • 9-2: Bleaching Columns (V-12A/B/C): Three vertical carbon steel vessels (1m dia, 4.5m H, 14mm thick). Contain a 15 cm catalyst layer on trays to bleach raw liquids into high-quality compounds, collected in a bottom horizontal tank. The catalyst is a calcined mixture of Bentonite and Zinc Oxide granules (2-3 mm) homogenized in water, which can be reactivated with steam and 5% HCl. • 9-3: Supporting Pumps: Vacuum pumps (VP-04A/B) at 5.5 kW extract vapors to the scrubber. Centrifugal pumps (P-09A/B) at 7.5 kW push bleached liquids to final tanks. 10. Production Tanks (V-13 A-F & V-18 A-C) • Light Products: Six horizontal carbon steel tanks (2.8m dia, 9m L, 55-ton capacity). V-13A/B for light naphtha, V-13C/D for Gas Oil, V-13E/F for diesel. • Asphalt: Three vertical carbon steel tanks (V-18A/B/C) (5m dia, 9m H). Equipped with thermal oil heating coils to keep asphalt liquid. Fully insulated (90 kg/m³ glass wool, 1.8mm aluminum cover). 11. Supporting Systems • 11-1: Gas Washing (Scrubber) System: Treats non-condensable gases before atmospheric release. Contains V-14 washing tank (1m dia, 2.8m L), a 500mm Flare stack with 3 ignitors, and a 1m x 1m LPG tank (V-15) for ignition. • 11-2: Cooling Tower: Provides cooling water for heat exchangers. Galvanized pressed steel basin (16m L x 2.4m W x 2.8m H), FRP casing, top fans, water distributors, and fill media. Includes Accumulator tank V-20 (1.5m dia, 2m L) and 11 kW pushing pumps (P-14A/B). • 11-3: Thermal Oil Boilers: Includes oil tank, heating boiler, oil pumps, and heating accelerators. • 11-4: Distillation Tower Raw Boilers • 11-5: Power Generation System • 11-6: Production Laboratory • 11-7: Control and Operation Room • 11-8: Catalyst System: Contains a vertical diesel tank (1m dia, 1.5m H) with a 1 kW centrifugal pump (P-11). Two vertical carbon steel tanks (V-17A/B, 1.5m dia, 4.5m H) with an MX-03 hydromotor mixer (7.5 kW, 30 RPM). V-17A is for preparation, V-17B pumps catalyst to the reactor. ________________________________________ Catalyst Chemical Components & Formulations 1. Alumina (Al2O3): Enhances the cracking of chemical bonds in heavy bitumen chains and increases Gas Oil extraction yield. 2. Manganese Dioxide (MnO2): Accelerates the reaction, reduces reaction time, and acts as a gasoline improver. 3. Silicon Dioxide (SiO2): Increases acceleration and reduces reaction time. 4. Iron Oxides (Fe2O): Accelerates the reaction, prevents pipe corrosion, and stops sulfur and wax from sticking to pipes and pumps. Weight Ratios (WT/WT) to Produce One Barrel (200 Liters) of Catalyst: 1. Alumina: Varies by feed: 2-2.5% for Bitumen / 4-5% for Vacuum Residue (VR) / 2-2.5% for Heavy Fuel Oil (HFO). To increase Gas Oil/Diesel (Light fuel) yield, Alumina can be added up to a maximum of 10%. 2. Manganese Dioxide: 2-2.5% for HFO / 4-5% for VR and Bitumen. 3. Iron Oxides: 2-2.5% across all feeds. 4. Silicon Dioxide: 2-2.5% for HFO / 4-5% for Bitumen and VR. 5. Remaining Volume: Filled with C-oil. Note: One barrel (200 Liters) of this mixture is added for every 5 tons of HFO, VR, or Bitumen. Manufacturing Mechanism: All components are placed in a tank, initially mixed with water, and heated to 80-120°C with continuous mixing (20-30 RPM). Once foam is generated, the product is allowed to cool to 80°C. The heating process up to 120°C is repeated 3 or 4 times until foaming ceases. Finally, the temperature is raised to 150°C, and the mixture is topped off to 200 liters using C-oil. To further improve light compound specifications, Zinc Oxide (300 grams) is mixed with 20 kg of Bentonite in C-oil. This is added alongside the catalyst at a ratio of 1/5 barrel of catalyst added to the reactor.
012
Hero
"Behold a marvel of design—an egg-shaped tent structure that emanates an ethereal glow, inviting you into its enchanting realm. Crafted from a lightweight aluminum framework, this innovative structure features flexible rods that bend and contour effortlessly. The framework forms a circular base and a smaller circle at the top, seamlessly connected by vertical rods that resemble the ribs of an egg. The entire ovoid structure is cloaked in a resilient fabric, specifically chosen for its suitability in tent and canopy construction. The fabric elegantly envelopes the entire surface of the egg-shaped tent, accentuating the seamless and organic form of the structure. Not a single curve or contour is left untouched, as the fabric adheres flawlessly to every edge and fold. The fabric embraces the tent with a gentle embrace, creating an alluring presence that emphasizes its resemblance to a magnificent hatching egg. Step through the grand entrance, and you will discover a world of tranquility and wonder. Inside, there is only emptiness, illuminated by a soft, ambient light that bathes the interior with a serene glow. The absence of physical objects accentuates the sense of spaciousness and invites a deep sense of introspection. The space becomes a sanctuary for personal reflection and connection with oneself. As you gaze upon this remarkable structure, it seamlessly integrates with the natural surroundings, becoming a harmonious element of the landscape. The fabric-covered egg-shaped tent stands as a testament to human ingenuity, offering a captivating and immersive experience. Its exterior showcases the gentle glow that emanates from within, captivating all who behold its beauty. The size of the tent, with its complete coverage and ovoid structure, is designed for a single occupant, providing an intimate and personal space for solace and reflection. The lightweight aluminum framework, meticulously designed, forms a circular base and a smaller circle at the top, with vertical rods extending from the upper ring to the lower one, connecting them to shape the rib-like structure of the egg. Step through the open entrance, and you will enter a sanctuary of serenity, where the only companions are the soft glow and the empty expanse. Allow the encompassing light and the tranquil haven to embrace you, as you embark on a journey of introspection and connection within the allure of this egg-shaped tent."
095
DreamShaper
A massive sheet of aluminum, very thin, wide, and long, is being compressed between two large industrial metal rollers. The rollers apply intense pressure, slightly deforming the sheet to make it perfectly flat. The setting is a modern metal processing factory, with light reflections on the shiny aluminum and detailed mechanical features on the rollers. The scene is shown from a slightly angled side perspective, with industrial lighting.
050
FLUX
Specialized Bitumen Refining Plant Governorate: Anbar / Hit District Production Capacity: ( ) Tons/Day The city of Hit in the Anbar Governorate is considered one of the most famous areas in the world for its natural "bitumen springs," which have been used for thousands of years (dating back to the Babylonian and Assyrian eras). However, processing this bitumen for modern use requires technical steps to transform it from a raw material into a viable product for construction or industrial applications. Bitumen emerges from these springs as a highly viscous liquid mixed with sulfurous water, salts, and mud impurities. This "Natural Asphalt" differs from petroleum bitumen produced in refineries, and it can also appear in the form of rocky or spongy blocks mixed with mud. To obtain industrially usable products from this bitumen, specifically for: 1. Waterproofing (Felt/Membranes): Considered one of the best coating materials for building foundations to prevent moisture leakage due to its high resistance to hydrolysis. 2. Road Paving: Mixed with gravel and sand to produce asphalt concrete. It is characterized by exceptionally high cohesive strength compared to industrial bitumen. The natural bitumen from these springs must undergo several fundamental processing stages to become industrially viable: 1. Collection and Sedimentation: Bitumen is collected from the springs or quarry sites and left in designated basins to allow the sulfurous water to naturally separate (due to density differences). 2. Primary Heating: The raw bitumen is placed in large boilers to: a. Evaporate the remaining water. b. Reduce viscosity for easier handling. 3. Filtration and Purification: The heated bitumen is screened to remove solid impurities such as gravel, dirt, and suspended organic matter. 4. Secondary Heating and Cooking: The temperature of the bitumen is raised, improving agents are added, and it is prepared for the vacuum distillation process. 5. Vacuum Distillation: The distillation process is conducted under low pressure (vacuum pressure), which allows for: a. The separation of light oils and volatile substances at lower temperatures. b. The production of highly pure "Hard Asphalt," which is highly demanded in the construction industry. ________________________________________ Plant Components and Operational Stages The specialized bitumen plant for processing raw natural bitumen (in both liquid and solid states) consists of a range of specialized equipment designed according to the latest international standards. This equipment aligns with the technical and engineering requirements for bitumen products, complies with Iraqi standard specifications, and adheres to environmental considerations in the Anbar Governorate. 1. Extraction Stage The raw material (solid or liquid) is extracted from quarries designated by the Geological Survey Authority using specialized mechanical equipment. It is stored in stocks or special basins for solid materials, then transported to the refinery site using specialized transport vehicles of various capacities. 2. Storage Stage The raw materials are stored in designated yards to ensure a sufficient inventory for continuous, uninterrupted production for no less than 7 working days. 3. Raw Material Preparation and Primary Heating Stage Raw materials are fed into the plant via hydraulic lifts. This stage includes: • 3-1: Crushing and Digestion: Solid raw materials from the quarries are broken down and digested using a digester (SH-01) equipped with double blades driven by hydraulic motors (22.5 kW capacity). The digester is 5 meters long and 1.80 meters in diameter, made of carbon steel, with Stainless Steel 304 blades. It includes a Stainless Steel piston driven by a 7.5 kW electric motor. • 3-2: Primary Heating: This melts the bitumen and improves pumpability through pipes and pumps. • 3-3: Efficiency Enhancement: To increase melting efficiency, Gas Oil is added to the primary heating basin at a ratio of 1:5 per ton of solid raw material entering the basin (this ratio decreases when using liquid raw bitumen). o 3-2-1: Primary Melting Basin (TK-01): Raw material is heated in a concrete tank (25m L x 5m W x 3m H) with a maximum storage capacity of 300 tons. Heating pipes circulate thermal fluid (oil) at 125°C, with a retention time of 4-6 hours. The tank is internally lined with 6-8 mm carbon steel plates to protect the heating pipes from corrosion. It contains 8 Stainless Steel 304 mixers (MX-01 A/B/C/D/E/F) driven by 7.5 kW electric motors (50 RPM) and gearboxes (1:60 ratio) to mix the material, increase heating efficiency, reduce retention time, and circulate the melted bitumen to eliminate dissolved water, resulting in a homogeneous melt. Covered with a carbon steel roof with service hatches, it connects to an air duct (30x60 cm) linked to 2 air blowers (AB-01A/B) (one operating, one standby) at 22.5 kW / 1500 RPM. These extract water vapor and sulfur fumes, sending them to a scrubber before atmospheric release and water recycling. o 3-2-2: Primary Collection Tank (V-01): A carbon steel tank (12-14 mm thick) with a maximum capacity of 125 tons (10m L x 5m W x 3m H). It connects directly to the primary tank (TK-01) via channels and movable gates to receive only liquid raw material. It contains thermal oil pipes to maintain the liquid raw material at 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum outer cover. Impurities larger than 35 mm are removed and collected in a waste tank. o 3-2-3: Screw Conveyors (SC-01 A/B): Carbon steel screw conveyors with a double-jacketed outer cover filled with thermal oil to maintain the 140°C temperature. Driven by 22.5 kW electric motors (3000 RPM) with 1:40 gearboxes, they transport the liquid raw material to the preliminary filtration unit. 4. Purification Unit Removes suspended impurities from the liquid raw material in two stages: • 4-1: Preliminary Purification Tank (V-02): A carbon steel tank (12-14 mm thick, 125-ton capacity, 5m L x 10m W x 3m H). Receives liquid raw material from the primary collection tank. Contains thermal oil pipes to maintain 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Impurities larger than 15 mm are removed to a waste tank. Material is pumped to the final filtration stage via gear pumps (GP-01 A/B) (one operating, one standby) at 22.5 kW / 1000 RPM. • 4-2: Final Filtration Unit (FT-01): Removes remaining impurities by passing liquids through box filters arranged in 2 trains (8 per train). They feature a two-layer Stainless Steel filter mesh (specified microns) wrapped around square boxes. Liquid enters from the outside, and pure liquid is collected from the inside via a pipe network connected to a manifold. This is driven by two vacuum pumps (VP-01A/B) connected to the raw material tanks. 5. Raw Material Tanks (V-03 A-J) Ten carbon steel tanks (2.5m diameter, 9m length, 14 mm thickness, 45-ton max capacity) equipped with thermal oil heating coils. They receive, store, and prepare the purified raw material for the subsequent cooking reaction. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Connected by a pipe/valve network, the material is pumped via two centrifugal pumps (P-01 A/B) at 22.5 kW / 3000 RPM to the reactor unit. The tanks connect to a pipe network driven by vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM, pushing heating gases and vapors to the gas washing tank (V-14). 6. Reactor (Cooking) Unit (V-04 A/B) Consists of three reactors (55 tons each) that prepare the raw material for vacuum distillation and extract light naphtha compounds. • 6-1: Cooking Process: o 6-1-1: Catalyst System: Consists of two tanks. One prepares the catalyst mixture (1.5m dia, 4m H, 8mm carbon steel) with a mixer (MX-03) driven by a hydromotor and 1:40 gearbox. The second stores Gas Oil added to the preparation unit (1.5m dia, 1m H, 5mm carbon steel) with a 0.5 HP centrifugal pump. o 6-1-2: Reaction Tanks (V-04/05/06A): Three carbon steel tanks (2.8m dia, 9m L, 14mm thick, 55-ton max). Each has 2 Stainless Steel mixers (MX-02 A/B/C/D/E/F) driven by a 7.5 kW motor (1500 RPM) with a 1:40 gearbox. Contains an internal heating system powered by a Gas Oil burner to raise the temperature to 180°C. Catalyst is injected via dosing pumps (DP-01A/B) to increase naphtha extraction efficiency. Material is circulated during cooking by two centrifugal pumps per reactor (P-04A/B/C/D/E/F) (one active, one standby) to reduce retention time to 3-4 hours. After cooking, material is moved to the attached tank (V-04/05/06B) for storage before distillation. Fully insulated. o 6-1-3: Cooked Material Tank (V-04/05/06B): Carbon steel tank (2.8m dia, 9m L, 14mm thick) with thermal oil pipes to maintain 190-200°C. Fully insulated. Material is pumped to the vacuum distillation tower via centrifugal pumps (P-05A/B) (one active, one standby) at 22.5 kW / 3000 RPM. 7. Raw Naphtha Storage Unit Collects and condenses naphtha extracted during cooking. • 7-1-1: Raw Naphtha Tanks (V-07A/B/C): Three vertical Stainless Steel 304 tanks (1.5m dia, 5m H) connected to three heat exchangers and two pump pairs. Equipped internally with water spray nozzles on a ring pipe to wash non-condensable gases. • 7-1-2: Heat Exchangers (HE-01A/B/C): Condense naphtha vapors from 140°C down to 40°C using water from the cooling tower. Connected in series. Shell & Tube type, carbon steel (510 mm dia, 6m L) with 70 tubes (0.75-inch dia) in two rows of 35. Includes internal baffles for efficiency. • 7-1-3: Supporting Pumps: Vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM draw naphtha vapors from reactors to the heat exchangers, pushing non-condensable gases to the scrubber (V-14). Centrifugal pumps (P-02A/B) at 11.5 kW / 1500 RPM transport liquid raw naphtha to the Bleaching Unit. 8. Vacuum Distillation Unit The core of the plant, separating remaining light compounds and producing hard asphalt. • 8-1-1: Vacuum Distillation Tower: A vertical tower (~16m total height, 14mm carbon steel). Bottom section (Reboiler) is 3.5m dia x 1.2m H; top section is 1.5m dia x 12m H. Fully insulated. Fed with cooked material at 190-200°C via pumps (P-05A/B). To start extraction (remaining naphtha, Gas Oil, diesel), temperature is raised to 240-250°C using Heating Coil 1 via pumps (P-08A/B) at 55 kW / 3000 RPM, with continuous circulation via pumps (P-07A/B). Vacuum pumps (VP-03A/B) maintain 0.3-0.5 mbar pressure. Light compounds are extracted, condensed (HE-02A/B/C), and stored (V-08/09/10 A/B) over 2.5-3 hours. Afterward, material is heated via Heating Coil 2 to 320-340°C to finalize extraction and produce hard bitumen. Product is extracted via pumps (P-07A/B) at ~320°C, cooled via cooling tower coils, and sent to final tanks (V-18A/B/C). Batch processing takes 6-7 hours daily; continuous operation is possible. • 8-1-2: Supporting Pumps: Vacuum pumps (VP-03A/B) at 5.5 kW / 3000 RPM draw light vapors for condensation. Circulation centrifugal pumps (P-08A/B) at 55 kW move hot material to heating coils; (P-07A/B) circulate material and pump final bitumen product. • 8-1-3: Heating Coils 1 & 2: Carbon steel 4-inch diameter coils heated externally by a Gas Oil burner. Connected in series to heat liquid bitumen in two stages to prevent degradation. • 8-2: Heat Exchangers (HE-02A/B/C): Condense light compound vapors from 240°C to 40°C. Shell & Tube type, carbon steel (600 mm dia, 6m L) with 80 tubes (1-inch dia) in two rows of 40, equipped with baffles. • 8-3: Light Compound Tanks (V-08A/B, V-09A/B, V-10A/B): Six horizontal carbon steel tanks (1.5m dia, 4.5m L, 14mm thick). Receive condensates, linked to heat exchangers and vacuum pumps. Liquids are pumped to the Bleaching Unit via centrifugal pumps (P-06A/B) at 7.5 kW / 1500 RPM. 9. Bleaching Unit Improves the specifications of raw light compounds for local use and marketing. • 9-1: Collection Tank (V-11): Horizontal carbon steel tank (1m dia, 2.5m L, 14mm thick) placed above the system to store and distribute light compounds to the bleaching columns. • 9-2: Bleaching Columns (V-12A/B/C): Three vertical carbon steel vessels (1m dia, 4.5m H, 14mm thick). Contain a 15 cm catalyst layer on trays to bleach raw liquids into high-quality compounds, collected in a bottom horizontal tank. The catalyst is a calcined mixture of Bentonite and Zinc Oxide granules (2-3 mm) homogenized in water, which can be reactivated with steam and 5% HCl. • 9-3: Supporting Pumps: Vacuum pumps (VP-04A/B) at 5.5 kW extract vapors to the scrubber. Centrifugal pumps (P-09A/B) at 7.5 kW push bleached liquids to final tanks. 10. Production Tanks (V-13 A-F & V-18 A-C) • Light Products: Six horizontal carbon steel tanks (2.8m dia, 9m L, 55-ton capacity). V-13A/B for light naphtha, V-13C/D for Gas Oil, V-13E/F for diesel. • Asphalt: Three vertical carbon steel tanks (V-18A/B/C) (5m dia, 9m H). Equipped with thermal oil heating coils to keep asphalt liquid. Fully insulated (90 kg/m³ glass wool, 1.8mm aluminum cover). 11. Supporting Systems • 11-1: Gas Washing (Scrubber) System: Treats non-condensable gases before atmospheric release. Contains V-14 washing tank (1m dia, 2.8m L), a 500mm Flare stack with 3 ignitors, and a 1m x 1m LPG tank (V-15) for ignition. • 11-2: Cooling Tower: Provides cooling water for heat exchangers. Galvanized pressed steel basin (16m L x 2.4m W x 2.8m H), FRP casing, top fans, water distributors, and fill media. Includes Accumulator tank V-20 (1.5m dia, 2m L) and 11 kW pushing pumps (P-14A/B). • 11-3: Thermal Oil Boilers: Includes oil tank, heating boiler, oil pumps, and heating accelerators. • 11-4: Distillation Tower Raw Boilers • 11-5: Power Generation System • 11-6: Production Laboratory • 11-7: Control and Operation Room • 11-8: Catalyst System: Contains a vertical diesel tank (1m dia, 1.5m H) with a 1 kW centrifugal pump (P-11). Two vertical carbon steel tanks (V-17A/B, 1.5m dia, 4.5m H) with an MX-03 hydromotor mixer (7.5 kW, 30 RPM). V-17A is for preparation, V-17B pumps catalyst to the reactor. ________________________________________ Catalyst Chemical Components & Formulations 1. Alumina (Al2O3): Enhances the cracking of chemical bonds in heavy bitumen chains and increases Gas Oil extraction yield. 2. Manganese Dioxide (MnO2): Accelerates the reaction, reduces reaction time, and acts as a gasoline improver. 3. Silicon Dioxide (SiO2): Increases acceleration and reduces reaction time. 4. Iron Oxides (Fe2O): Accelerates the reaction, prevents pipe corrosion, and stops sulfur and wax from sticking to pipes and pumps. Weight Ratios (WT/WT) to Produce One Barrel (200 Liters) of Catalyst: 1. Alumina: Varies by feed: 2-2.5% for Bitumen / 4-5% for Vacuum Residue (VR) / 2-2.5% for Heavy Fuel Oil (HFO). To increase Gas Oil/Diesel (Light fuel) yield, Alumina can be added up to a maximum of 10%. 2. Manganese Dioxide: 2-2.5% for HFO / 4-5% for VR and Bitumen. 3. Iron Oxides: 2-2.5% across all feeds. 4. Silicon Dioxide: 2-2.5% for HFO / 4-5% for Bitumen and VR. 5. Remaining Volume: Filled with C-oil. Note: One barrel (200 Liters) of this mixture is added for every 5 tons of HFO, VR, or Bitumen. Manufacturing Mechanism: All components are placed in a tank, initially mixed with water, and heated to 80-120°C with continuous mixing (20-30 RPM). Once foam is generated, the product is allowed to cool to 80°C. The heating process up to 120°C is repeated 3 or 4 times until foaming ceases. Finally, the temperature is raised to 150°C, and the mixture is topped off to 200 liters using C-oil. To further improve light compound specifications, Zinc Oxide (300 grams) is mixed with 20 kg of Bentonite in C-oil. This is added alongside the catalyst at a ratio of 1/5 barrel of catalyst added to the reactor.
012
Hero
"Behold a marvel of design—an egg-shaped tent structure that emanates an ethereal glow, inviting you into its enchanting realm. Crafted from a lightweight aluminum framework, this innovative structure features flexible rods that bend and contour effortlessly. The framework forms a circular base and a smaller circle at the top, seamlessly connected by vertical rods that resemble the ribs of an egg. The entire ovoid structure is cloaked in a resilient fabric, specifically chosen for its suitability in tent and canopy construction. The fabric elegantly envelopes the entire surface of the egg-shaped tent, accentuating the seamless and organic form of the structure. Not a single curve or contour is left untouched, as the fabric adheres flawlessly to every edge and fold. The fabric embraces the tent with a gentle embrace, creating an alluring presence that emphasizes its resemblance to a magnificent hatching egg. Step through the grand entrance, and you will discover a world of tranquility and wonder. Inside, there is only emptiness, illuminated by a soft, ambient light that bathes the interior with a serene glow. The absence of physical objects accentuates the sense of spaciousness and invites a deep sense of introspection. The space becomes a sanctuary for personal reflection and connection with oneself. As you gaze upon this remarkable structure, it seamlessly integrates with the natural surroundings, becoming a harmonious element of the landscape. The fabric-covered egg-shaped tent stands as a testament to human ingenuity, offering a captivating and immersive experience. Its exterior showcases the gentle glow that emanates from within, captivating all who behold its beauty. The size of the tent, with its complete coverage and ovoid structure, is designed for a single occupant, providing an intimate and personal space for solace and reflection. The lightweight aluminum framework, meticulously designed, forms a circular base and a smaller circle at the top, with vertical rods extending from the upper ring to the lower one, connecting them to shape the rib-like structure of the egg. Step through the open entrance, and you will enter a sanctuary of serenity, where the only companions are the soft glow and the empty expanse. Allow the encompassing light and the tranquil haven to embrace you, as you embark on a journey of introspection and connection within the allure of this egg-shaped tent."
1127
DreamShaper
generate this business card: Layout 1: Modern Minimalist Colors: Primarily Atlantic Blue and Aluminum Snow. Layout:Left Side: Professional headshot in a circular or square frame. Right Side:Company Name: "SAFETY COMPLIANCE PROS" in bold, sans-serif font. Personal Name in a slightly smaller, sans-serif font. Contact information icons aligned vertically: Email icon Phone icon Location icon Geometric Corner Shape: A geometric shape in Aluminum Snow, placed at the top right corner of the card.
081
FLUX
A massive sheet of aluminum, very thin, wide, and long, is being compressed between two large industrial metal rollers. The rollers apply intense pressure, slightly deforming the sheet to make it perfectly flat. The setting is a modern metal processing factory, with light reflections on the shiny aluminum and detailed mechanical features on the rollers. The scene is shown from a slightly angled side perspective, with industrial lighting.
027
FLUX
Specialized Bitumen Refining Plant Governorate: Anbar / Hit District Production Capacity: ( ) Tons/Day The city of Hit in the Anbar Governorate is considered one of the most famous areas in the world for its natural "bitumen springs," which have been used for thousands of years (dating back to the Babylonian and Assyrian eras). However, processing this bitumen for modern use requires technical steps to transform it from a raw material into a viable product for construction or industrial applications. Bitumen emerges from these springs as a highly viscous liquid mixed with sulfurous water, salts, and mud impurities. This "Natural Asphalt" differs from petroleum bitumen produced in refineries, and it can also appear in the form of rocky or spongy blocks mixed with mud. To obtain industrially usable products from this bitumen, specifically for: 1. Waterproofing (Felt/Membranes): Considered one of the best coating materials for building foundations to prevent moisture leakage due to its high resistance to hydrolysis. 2. Road Paving: Mixed with gravel and sand to produce asphalt concrete. It is characterized by exceptionally high cohesive strength compared to industrial bitumen. The natural bitumen from these springs must undergo several fundamental processing stages to become industrially viable: 1. Collection and Sedimentation: Bitumen is collected from the springs or quarry sites and left in designated basins to allow the sulfurous water to naturally separate (due to density differences). 2. Primary Heating: The raw bitumen is placed in large boilers to: a. Evaporate the remaining water. b. Reduce viscosity for easier handling. 3. Filtration and Purification: The heated bitumen is screened to remove solid impurities such as gravel, dirt, and suspended organic matter. 4. Secondary Heating and Cooking: The temperature of the bitumen is raised, improving agents are added, and it is prepared for the vacuum distillation process. 5. Vacuum Distillation: The distillation process is conducted under low pressure (vacuum pressure), which allows for: a. The separation of light oils and volatile substances at lower temperatures. b. The production of highly pure "Hard Asphalt," which is highly demanded in the construction industry. ________________________________________ Plant Components and Operational Stages The specialized bitumen plant for processing raw natural bitumen (in both liquid and solid states) consists of a range of specialized equipment designed according to the latest international standards. This equipment aligns with the technical and engineering requirements for bitumen products, complies with Iraqi standard specifications, and adheres to environmental considerations in the Anbar Governorate. 1. Extraction Stage The raw material (solid or liquid) is extracted from quarries designated by the Geological Survey Authority using specialized mechanical equipment. It is stored in stocks or special basins for solid materials, then transported to the refinery site using specialized transport vehicles of various capacities. 2. Storage Stage The raw materials are stored in designated yards to ensure a sufficient inventory for continuous, uninterrupted production for no less than 7 working days. 3. Raw Material Preparation and Primary Heating Stage Raw materials are fed into the plant via hydraulic lifts. This stage includes: • 3-1: Crushing and Digestion: Solid raw materials from the quarries are broken down and digested using a digester (SH-01) equipped with double blades driven by hydraulic motors (22.5 kW capacity). The digester is 5 meters long and 1.80 meters in diameter, made of carbon steel, with Stainless Steel 304 blades. It includes a Stainless Steel piston driven by a 7.5 kW electric motor. • 3-2: Primary Heating: This melts the bitumen and improves pumpability through pipes and pumps. • 3-3: Efficiency Enhancement: To increase melting efficiency, Gas Oil is added to the primary heating basin at a ratio of 1:5 per ton of solid raw material entering the basin (this ratio decreases when using liquid raw bitumen). o 3-2-1: Primary Melting Basin (TK-01): Raw material is heated in a concrete tank (25m L x 5m W x 3m H) with a maximum storage capacity of 300 tons. Heating pipes circulate thermal fluid (oil) at 125°C, with a retention time of 4-6 hours. The tank is internally lined with 6-8 mm carbon steel plates to protect the heating pipes from corrosion. It contains 8 Stainless Steel 304 mixers (MX-01 A/B/C/D/E/F) driven by 7.5 kW electric motors (50 RPM) and gearboxes (1:60 ratio) to mix the material, increase heating efficiency, reduce retention time, and circulate the melted bitumen to eliminate dissolved water, resulting in a homogeneous melt. Covered with a carbon steel roof with service hatches, it connects to an air duct (30x60 cm) linked to 2 air blowers (AB-01A/B) (one operating, one standby) at 22.5 kW / 1500 RPM. These extract water vapor and sulfur fumes, sending them to a scrubber before atmospheric release and water recycling. o 3-2-2: Primary Collection Tank (V-01): A carbon steel tank (12-14 mm thick) with a maximum capacity of 125 tons (10m L x 5m W x 3m H). It connects directly to the primary tank (TK-01) via channels and movable gates to receive only liquid raw material. It contains thermal oil pipes to maintain the liquid raw material at 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum outer cover. Impurities larger than 35 mm are removed and collected in a waste tank. o 3-2-3: Screw Conveyors (SC-01 A/B): Carbon steel screw conveyors with a double-jacketed outer cover filled with thermal oil to maintain the 140°C temperature. Driven by 22.5 kW electric motors (3000 RPM) with 1:40 gearboxes, they transport the liquid raw material to the preliminary filtration unit. 4. Purification Unit Removes suspended impurities from the liquid raw material in two stages: • 4-1: Preliminary Purification Tank (V-02): A carbon steel tank (12-14 mm thick, 125-ton capacity, 5m L x 10m W x 3m H). Receives liquid raw material from the primary collection tank. Contains thermal oil pipes to maintain 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Impurities larger than 15 mm are removed to a waste tank. Material is pumped to the final filtration stage via gear pumps (GP-01 A/B) (one operating, one standby) at 22.5 kW / 1000 RPM. • 4-2: Final Filtration Unit (FT-01): Removes remaining impurities by passing liquids through box filters arranged in 2 trains (8 per train). They feature a two-layer Stainless Steel filter mesh (specified microns) wrapped around square boxes. Liquid enters from the outside, and pure liquid is collected from the inside via a pipe network connected to a manifold. This is driven by two vacuum pumps (VP-01A/B) connected to the raw material tanks. 5. Raw Material Tanks (V-03 A-J) Ten carbon steel tanks (2.5m diameter, 9m length, 14 mm thickness, 45-ton max capacity) equipped with thermal oil heating coils. They receive, store, and prepare the purified raw material for the subsequent cooking reaction. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Connected by a pipe/valve network, the material is pumped via two centrifugal pumps (P-01 A/B) at 22.5 kW / 3000 RPM to the reactor unit. The tanks connect to a pipe network driven by vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM, pushing heating gases and vapors to the gas washing tank (V-14). 6. Reactor (Cooking) Unit (V-04 A/B) Consists of three reactors (55 tons each) that prepare the raw material for vacuum distillation and extract light naphtha compounds. • 6-1: Cooking Process: o 6-1-1: Catalyst System: Consists of two tanks. One prepares the catalyst mixture (1.5m dia, 4m H, 8mm carbon steel) with a mixer (MX-03) driven by a hydromotor and 1:40 gearbox. The second stores Gas Oil added to the preparation unit (1.5m dia, 1m H, 5mm carbon steel) with a 0.5 HP centrifugal pump. o 6-1-2: Reaction Tanks (V-04/05/06A): Three carbon steel tanks (2.8m dia, 9m L, 14mm thick, 55-ton max). Each has 2 Stainless Steel mixers (MX-02 A/B/C/D/E/F) driven by a 7.5 kW motor (1500 RPM) with a 1:40 gearbox. Contains an internal heating system powered by a Gas Oil burner to raise the temperature to 180°C. Catalyst is injected via dosing pumps (DP-01A/B) to increase naphtha extraction efficiency. Material is circulated during cooking by two centrifugal pumps per reactor (P-04A/B/C/D/E/F) (one active, one standby) to reduce retention time to 3-4 hours. After cooking, material is moved to the attached tank (V-04/05/06B) for storage before distillation. Fully insulated. o 6-1-3: Cooked Material Tank (V-04/05/06B): Carbon steel tank (2.8m dia, 9m L, 14mm thick) with thermal oil pipes to maintain 190-200°C. Fully insulated. Material is pumped to the vacuum distillation tower via centrifugal pumps (P-05A/B) (one active, one standby) at 22.5 kW / 3000 RPM. 7. Raw Naphtha Storage Unit Collects and condenses naphtha extracted during cooking. • 7-1-1: Raw Naphtha Tanks (V-07A/B/C): Three vertical Stainless Steel 304 tanks (1.5m dia, 5m H) connected to three heat exchangers and two pump pairs. Equipped internally with water spray nozzles on a ring pipe to wash non-condensable gases. • 7-1-2: Heat Exchangers (HE-01A/B/C): Condense naphtha vapors from 140°C down to 40°C using water from the cooling tower. Connected in series. Shell & Tube type, carbon steel (510 mm dia, 6m L) with 70 tubes (0.75-inch dia) in two rows of 35. Includes internal baffles for efficiency. • 7-1-3: Supporting Pumps: Vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM draw naphtha vapors from reactors to the heat exchangers, pushing non-condensable gases to the scrubber (V-14). Centrifugal pumps (P-02A/B) at 11.5 kW / 1500 RPM transport liquid raw naphtha to the Bleaching Unit. 8. Vacuum Distillation Unit The core of the plant, separating remaining light compounds and producing hard asphalt. • 8-1-1: Vacuum Distillation Tower: A vertical tower (~16m total height, 14mm carbon steel). Bottom section (Reboiler) is 3.5m dia x 1.2m H; top section is 1.5m dia x 12m H. Fully insulated. Fed with cooked material at 190-200°C via pumps (P-05A/B). To start extraction (remaining naphtha, Gas Oil, diesel), temperature is raised to 240-250°C using Heating Coil 1 via pumps (P-08A/B) at 55 kW / 3000 RPM, with continuous circulation via pumps (P-07A/B). Vacuum pumps (VP-03A/B) maintain 0.3-0.5 mbar pressure. Light compounds are extracted, condensed (HE-02A/B/C), and stored (V-08/09/10 A/B) over 2.5-3 hours. Afterward, material is heated via Heating Coil 2 to 320-340°C to finalize extraction and produce hard bitumen. Product is extracted via pumps (P-07A/B) at ~320°C, cooled via cooling tower coils, and sent to final tanks (V-18A/B/C). Batch processing takes 6-7 hours daily; continuous operation is possible. • 8-1-2: Supporting Pumps: Vacuum pumps (VP-03A/B) at 5.5 kW / 3000 RPM draw light vapors for condensation. Circulation centrifugal pumps (P-08A/B) at 55 kW move hot material to heating coils; (P-07A/B) circulate material and pump final bitumen product. • 8-1-3: Heating Coils 1 & 2: Carbon steel 4-inch diameter coils heated externally by a Gas Oil burner. Connected in series to heat liquid bitumen in two stages to prevent degradation. • 8-2: Heat Exchangers (HE-02A/B/C): Condense light compound vapors from 240°C to 40°C. Shell & Tube type, carbon steel (600 mm dia, 6m L) with 80 tubes (1-inch dia) in two rows of 40, equipped with baffles. • 8-3: Light Compound Tanks (V-08A/B, V-09A/B, V-10A/B): Six horizontal carbon steel tanks (1.5m dia, 4.5m L, 14mm thick). Receive condensates, linked to heat exchangers and vacuum pumps. Liquids are pumped to the Bleaching Unit via centrifugal pumps (P-06A/B) at 7.5 kW / 1500 RPM. 9. Bleaching Unit Improves the specifications of raw light compounds for local use and marketing. • 9-1: Collection Tank (V-11): Horizontal carbon steel tank (1m dia, 2.5m L, 14mm thick) placed above the system to store and distribute light compounds to the bleaching columns. • 9-2: Bleaching Columns (V-12A/B/C): Three vertical carbon steel vessels (1m dia, 4.5m H, 14mm thick). Contain a 15 cm catalyst layer on trays to bleach raw liquids into high-quality compounds, collected in a bottom horizontal tank. The catalyst is a calcined mixture of Bentonite and Zinc Oxide granules (2-3 mm) homogenized in water, which can be reactivated with steam and 5% HCl. • 9-3: Supporting Pumps: Vacuum pumps (VP-04A/B) at 5.5 kW extract vapors to the scrubber. Centrifugal pumps (P-09A/B) at 7.5 kW push bleached liquids to final tanks. 10. Production Tanks (V-13 A-F & V-18 A-C) • Light Products: Six horizontal carbon steel tanks (2.8m dia, 9m L, 55-ton capacity). V-13A/B for light naphtha, V-13C/D for Gas Oil, V-13E/F for diesel. • Asphalt: Three vertical carbon steel tanks (V-18A/B/C) (5m dia, 9m H). Equipped with thermal oil heating coils to keep asphalt liquid. Fully insulated (90 kg/m³ glass wool, 1.8mm aluminum cover). 11. Supporting Systems • 11-1: Gas Washing (Scrubber) System: Treats non-condensable gases before atmospheric release. Contains V-14 washing tank (1m dia, 2.8m L), a 500mm Flare stack with 3 ignitors, and a 1m x 1m LPG tank (V-15) for ignition. • 11-2: Cooling Tower: Provides cooling water for heat exchangers. Galvanized pressed steel basin (16m L x 2.4m W x 2.8m H), FRP casing, top fans, water distributors, and fill media. Includes Accumulator tank V-20 (1.5m dia, 2m L) and 11 kW pushing pumps (P-14A/B). • 11-3: Thermal Oil Boilers: Includes oil tank, heating boiler, oil pumps, and heating accelerators. • 11-4: Distillation Tower Raw Boilers • 11-5: Power Generation System • 11-6: Production Laboratory • 11-7: Control and Operation Room • 11-8: Catalyst System: Contains a vertical diesel tank (1m dia, 1.5m H) with a 1 kW centrifugal pump (P-11). Two vertical carbon steel tanks (V-17A/B, 1.5m dia, 4.5m H) with an MX-03 hydromotor mixer (7.5 kW, 30 RPM). V-17A is for preparation, V-17B pumps catalyst to the reactor. ________________________________________ Catalyst Chemical Components & Formulations 1. Alumina (Al2O3): Enhances the cracking of chemical bonds in heavy bitumen chains and increases Gas Oil extraction yield. 2. Manganese Dioxide (MnO2): Accelerates the reaction, reduces reaction time, and acts as a gasoline improver. 3. Silicon Dioxide (SiO2): Increases acceleration and reduces reaction time. 4. Iron Oxides (Fe2O): Accelerates the reaction, prevents pipe corrosion, and stops sulfur and wax from sticking to pipes and pumps. Weight Ratios (WT/WT) to Produce One Barrel (200 Liters) of Catalyst: 1. Alumina: Varies by feed: 2-2.5% for Bitumen / 4-5% for Vacuum Residue (VR) / 2-2.5% for Heavy Fuel Oil (HFO). To increase Gas Oil/Diesel (Light fuel) yield, Alumina can be added up to a maximum of 10%. 2. Manganese Dioxide: 2-2.5% for HFO / 4-5% for VR and Bitumen. 3. Iron Oxides: 2-2.5% across all feeds. 4. Silicon Dioxide: 2-2.5% for HFO / 4-5% for Bitumen and VR. 5. Remaining Volume: Filled with C-oil. Note: One barrel (200 Liters) of this mixture is added for every 5 tons of HFO, VR, or Bitumen. Manufacturing Mechanism: All components are placed in a tank, initially mixed with water, and heated to 80-120°C with continuous mixing (20-30 RPM). Once foam is generated, the product is allowed to cool to 80°C. The heating process up to 120°C is repeated 3 or 4 times until foaming ceases. Finally, the temperature is raised to 150°C, and the mixture is topped off to 200 liters using C-oil. To further improve light compound specifications, Zinc Oxide (300 grams) is mixed with 20 kg of Bentonite in C-oil. This is added alongside the catalyst at a ratio of 1/5 barrel of catalyst added to the reactor.
010
Hero
{ "prompt_type": "descriptive_replication", "reference_adherence": "STRICT_VISUAL_FIDELITY", "aspect_ratio": "4:5", "style": "1990s compact digital camera aesthetic with harsh on‑camera flash, grainy texture, washed‑out colors, high contrast, subtle chromatic aberration and halation. NO HDR, NO tone mapping, NO modern digital processing. The image looks like a raw, unedited flash photograph taken at night in a luxury modern interior (a penthouse or study), using an early digital point‑and‑shoot (e.g., Kodak DC series, Sony Mavica). The flash is the main light source – it creates deep, sharp shadows and overexposed highlights, the classic 'deer‑in‑headlights' effect. Background details are heavily darkened but faintly visible (dark wooden shelves, a leather chair, a window with city lights). Ultra‑realistic skin texture (on hands/arms), visible pores, fabric grain, metal reflections – all rendered with natural grain and no smoothing. The composition is slightly tilted, with a slight vertical banding artifact (CCD readout noise), a micro‑scratch on the lens (barely visible in lower right), and a subtle vignette with a faint greenish‑purple color shift at the edges – all adding authentic 90s digital camera character. The scene is dark, moody, powerful, with a raw, criminal‑luxury atmosphere.", "character": { "identity": "Wealthy mysterious man (Welison), early 30s, athletic build, broad shoulders, dominant posture. Bare chested (or wearing a black fitted t‑shirt?), but from previous descriptions often bare chested to show tattoo. However, holding a MacBook and money might be better with a black tactical top. But we can keep the bare chest / open jacket style. I'll make him wear a black ribbed sleeveless top (or bare chest with tactical trousers) to show the chest tattoo. Let's use a black sleeveless compression top to keep consistent with earlier 'tactical' look, but also allow the tattoo to be visible? Actually, the tattoo is on the upper chest – if he's holding items in both hands, his chest might be exposed. I'll describe him wearing a black tailored jacket (unbuttoned) or just bare chest? To avoid overcomplicating, I'll use a black fitted vest (tactical) that leaves arms and upper chest exposed, so the tattoo can be seen. Or simply bare chested with black trousers. Let's go with bare chested (as in many previous prompts) to show the tattoo.", "face_and_head": { "visibility": "completely obscured by a black ribbed balaclava (full‑face coverage, no openings) with a metallic silver‑grey embroidered Masonic pattern (all‑seeing eye, pyramid, geometric symbols). Over the balaclava, rectangular gold‑frame sunglasses (semi‑rimless, dark grey gradient lenses, Masonic logo on left lens)." }, "torso_and_tattoo": { "description": "Bare chest, slightly sweaty. Large tattoo on center chest in Chicano‑smoke style: dark clouds, swirling smoke, soft waves merging into skin. In the center, the word 'ШРЕДЕР' in a bold calligraphic brushstroke style with a thin white double outline, creating a subtle glow. Below the text, a Masonic pyramid with an all‑seeing eye and geometric symbols." }, "necklace": "Thick, heavy moissanite chain, Cuban link weave, spelling 'SHREDE1RR' with large letters, hanging onto bare chest.", "clothing": { "description": "Bare chested. Black tailored trousers (slim fit, low waist), black leather belt, barefoot or black shoes (not visible)." }, "hands_and_props": { "left_hand": "Holding a silver MacBook laptop (closed or slightly open? Preferably closed, held flat or at an angle). The MacBook screen is dark, the aluminum body reflects the flash with bright specular highlights.", "right_hand": "Holding a very thick stack of 50‑euro banknotes (approx. 10‑12 cm thick, tightly bound with a white or yellow rubber band). The notes are crisp, the flash catches the holograms and the edge details, euro symbol visible on the top note.", "pose": "Standing facing the camera directly, centered, slightly low angle. Arms slightly bent, holding both items at waist or chest level. The MacBook is held horizontally by the left hand (like a tray), the money stack is held vertically or slightly tilted in the right hand, showing the thickness. The pose is dominant, wealthy, controlling." } }, "environment": { "setting": "Luxury modern penthouse study at night. Dark wooden shelves with books and abstract sculptures, a large leather armchair in the background, a window revealing faint city lights (completely darkened by flash). The desk is polished black glass, barely visible. The atmosphere is opulent and secretive.", "background": { "description": "Very dark, almost black, with faint outlines of bookshelves and a window. A single dim light source (overpowered) but not visible. The flash creates a bright circular hotspot directly behind the subject, fading to black edges." } }, "lighting_and_atmosphere": { "source": "ON‑CAMERA FLASH ONLY (early 1990s compact digital camera). No other light sources. This is NOT HDR.", "quality": "extremely harsh, high contrast, overexposed highlights on the MacBook aluminum body, the white rubber band on the money, the gold sunglasses, the moissanite chain, and the specular highlights on the sweaty skin.", "effects": [ "strong, direct flash creating hard highlights on the MacBook casing (silver reflections), on the euro banknotes holograms, and on the glossy surfaces", "the white double outline of the tattoo reflects the flash with a faint glow", "background completely black – no details visible except faint outlines", "grainy texture typical of early digital compacts (heavy grain in shadows, fine grain in highlights)", "washed out colors, skin tones pale with a slight blue/green cast from the flash", "extremely high contrast – bright whites (MacBook, money edge) next to deep blacks", "subtle chromatic aberration (purple/green fringing) on high‑contrast edges (MacBook corners, sunglasses, banknotes edges)", "slight barrel distortion, lens flare (small circular artifacts from the flash)", "vertical banding artifact (CCD readout noise) visible in the dark background", "a micro‑scratch on the lens in the lower right corner", "subtle greenish‑purple vignette at the edges" ], "color_cast": "cool white balance (slightly blue/green), typical of early digital flashes. The MacBook silver appears with a cool tint, the money is pale greenish‑yellow, skin pale.", "contrast": "extremely high (maximum)" }, "camera_and_technical": { "perspective": "Straight‑on, eye level, centered composition. Medium shot (from mid‑chest to above head). Camera distance ~1.5‑2 m.", "camera_position": "handheld, compact digital camera from early 1990s (e.g., Kodak DC series, Sony Mavica), 35mm equivalent, fixed focus or autofocus with slight softness, aperture f/2.8‑f/4, shutter speed 1/60s, ISO 200‑400 with heavy grain.", "framing": "vertical 4:5, medium shot, subject perfectly centered, slight tilt (~2‑3°), a small intruding element (a strap or finger) in the upper left corner, a micro‑scratch on the lens in lower right.", "focus": "slightly soft, typical of flash photography, the face (mask) and the items (MacBook, money) are relatively sharp, background out of focus and black.", "visual_fidelity": "grainy, low resolution aesthetic, harsh flash, no HDR, no tone mapping, ultra high quality real image (realistic because of imperfections), candid snapshot with authentic 1990s compact camera feel." }, "realism_constraints": { "allowed": [ "grain", "washed out colors", "overexposed highlights", "harsh shadows with no detail", "pitch black background", "imperfect composition (slight tilt, intruding element, lens micro‑scratch, vertical banding, vignette)", "natural skin texture on arms and chest (pores, sweat beads, muscle)", "visible carbon fiber weave (mask), aluminum texture (MacBook), paper texture (money)", "chromatic aberration", "barrel distortion", "lens flare" ], "forbidden": [ "HDR", "tone mapping", "dynamic range compression", "lifted shadows", "detail in shadows", "soft lighting", "multiple light sources", "fill light", "ambient light visible (except faint outlines)", "even exposure", "balanced lighting", "modern digital perfection", "sharp focus (clinical)", "perfect composition", "cinematic look", "8k", "masterpiece", "airbrushed skin", "plastic skin", "CGI", "3d render", "stylized", "smartphone HDR", "deep fusion", "smart HDR", "visible brand logos (except Apple on MacBook? that's fine but we can ignore)", "any facial features visible through mask", "skin on face or neck", "matte plastic mask" ] }, "negative_prompt": [ "different character", "face visible", "facial features", "eyes visible", "mouth visible", "skin on face", "skin on neck", "beauty filters", "airbrushed skin", "anime", "cartoon", "over-sharpening", "clean digital look", "perfect exposure", "smooth gradients", "messy appearance", "greasy skin", "overexposed (beyond intended aesthetic)", "HDR", "tone mapping", "dynamic range", "lifted shadows", "detail in shadows", "soft lighting", "fill light", "ambient light", "even exposure", "balanced lighting", "CGI", "3d render", "plastic texture (except carbon fiber mask)", "smooth", "airbrushed", "digital art", "painting", "deformed hands", "extra fingers", "missing fingers", "blurry (beyond intentional soft focus)", "low detail", "unrealistic proportions", "bad anatomy", "watermark", "signature", "professional photography", "studio lighting (modern softbox)", "sharp focus (clinical)", "perfect composition", "cinematic (modern)", "8k", "masterpiece", "stylized", "modern digital", "natural light (flash must dominate)", "golden hour", "teal and orange", "warm tones", "iPhone", "LED flash (only 1990s compact camera flash)", "modern smartphone", "daylight", "no flash look", "bright background", "detailed background", "left hand not holding MacBook", "right hand not holding money", "MacBook open", "money scattered" ] }
09
Nano Banana
"Behold a marvel of design—an egg-shaped tent structure that emanates an ethereal glow, inviting you into its enchanting realm. Crafted from a lightweight aluminum framework, this innovative structure features flexible rods that bend and contour effortlessly. The framework forms a circular base and a smaller circle at the top, seamlessly connected by vertical rods that resemble the ribs of an egg. The entire ovoid structure is cloaked in a resilient fabric, specifically chosen for its suitability in tent and canopy construction. The fabric elegantly envelopes the entire surface of the egg-shaped tent, accentuating the seamless and organic form of the structure. Not a single curve or contour is left untouched, as the fabric adheres flawlessly to every edge and fold. The fabric embraces the tent with a gentle embrace, creating an alluring presence that emphasizes its resemblance to a magnificent hatching egg. Step through the grand entrance, and you will discover a world of tranquility and wonder. Inside, there is only emptiness, illuminated by a soft, ambient light that bathes the interior with a serene glow. The absence of physical objects accentuates the sense of spaciousness and invites a deep sense of introspection. The space becomes a sanctuary for personal reflection and connection with oneself. As you gaze upon this remarkable structure, it seamlessly integrates with the natural surroundings, becoming a harmonious element of the landscape. The fabric-covered egg-shaped tent stands as a testament to human ingenuity, offering a captivating and immersive experience. Its exterior showcases the gentle glow that emanates from within, captivating all who behold its beauty. The size of the tent, with its complete coverage and ovoid structure, is designed for a single occupant, providing an intimate and personal space for solace and reflection. The lightweight aluminum framework, meticulously designed, forms a circular base and a smaller circle at the top, with vertical rods extending from the upper ring to the lower one, connecting them to shape the rib-like structure of the egg. Step through the open entrance, and you will enter a sanctuary of serenity, where the only companions are the soft glow and the empty expanse. Allow the encompassing light and the tranquil haven to embrace you, as you embark on a journey of introspection and connection within the allure of this egg-shaped tent."
0104
DreamShaper
Specialized Bitumen Refining Plant Governorate: Anbar / Hit District Production Capacity: ( ) Tons/Day The city of Hit in the Anbar Governorate is considered one of the most famous areas in the world for its natural "bitumen springs," which have been used for thousands of years (dating back to the Babylonian and Assyrian eras). However, processing this bitumen for modern use requires technical steps to transform it from a raw material into a viable product for construction or industrial applications. Bitumen emerges from these springs as a highly viscous liquid mixed with sulfurous water, salts, and mud impurities. This "Natural Asphalt" differs from petroleum bitumen produced in refineries, and it can also appear in the form of rocky or spongy blocks mixed with mud. To obtain industrially usable products from this bitumen, specifically for: 1. Waterproofing (Felt/Membranes): Considered one of the best coating materials for building foundations to prevent moisture leakage due to its high resistance to hydrolysis. 2. Road Paving: Mixed with gravel and sand to produce asphalt concrete. It is characterized by exceptionally high cohesive strength compared to industrial bitumen. The natural bitumen from these springs must undergo several fundamental processing stages to become industrially viable: 1. Collection and Sedimentation: Bitumen is collected from the springs or quarry sites and left in designated basins to allow the sulfurous water to naturally separate (due to density differences). 2. Primary Heating: The raw bitumen is placed in large boilers to: a. Evaporate the remaining water. b. Reduce viscosity for easier handling. 3. Filtration and Purification: The heated bitumen is screened to remove solid impurities such as gravel, dirt, and suspended organic matter. 4. Secondary Heating and Cooking: The temperature of the bitumen is raised, improving agents are added, and it is prepared for the vacuum distillation process. 5. Vacuum Distillation: The distillation process is conducted under low pressure (vacuum pressure), which allows for: a. The separation of light oils and volatile substances at lower temperatures. b. The production of highly pure "Hard Asphalt," which is highly demanded in the construction industry. ________________________________________ Plant Components and Operational Stages The specialized bitumen plant for processing raw natural bitumen (in both liquid and solid states) consists of a range of specialized equipment designed according to the latest international standards. This equipment aligns with the technical and engineering requirements for bitumen products, complies with Iraqi standard specifications, and adheres to environmental considerations in the Anbar Governorate. 1. Extraction Stage The raw material (solid or liquid) is extracted from quarries designated by the Geological Survey Authority using specialized mechanical equipment. It is stored in stocks or special basins for solid materials, then transported to the refinery site using specialized transport vehicles of various capacities. 2. Storage Stage The raw materials are stored in designated yards to ensure a sufficient inventory for continuous, uninterrupted production for no less than 7 working days. 3. Raw Material Preparation and Primary Heating Stage Raw materials are fed into the plant via hydraulic lifts. This stage includes: • 3-1: Crushing and Digestion: Solid raw materials from the quarries are broken down and digested using a digester (SH-01) equipped with double blades driven by hydraulic motors (22.5 kW capacity). The digester is 5 meters long and 1.80 meters in diameter, made of carbon steel, with Stainless Steel 304 blades. It includes a Stainless Steel piston driven by a 7.5 kW electric motor. • 3-2: Primary Heating: This melts the bitumen and improves pumpability through pipes and pumps. • 3-3: Efficiency Enhancement: To increase melting efficiency, Gas Oil is added to the primary heating basin at a ratio of 1:5 per ton of solid raw material entering the basin (this ratio decreases when using liquid raw bitumen). o 3-2-1: Primary Melting Basin (TK-01): Raw material is heated in a concrete tank (25m L x 5m W x 3m H) with a maximum storage capacity of 300 tons. Heating pipes circulate thermal fluid (oil) at 125°C, with a retention time of 4-6 hours. The tank is internally lined with 6-8 mm carbon steel plates to protect the heating pipes from corrosion. It contains 8 Stainless Steel 304 mixers (MX-01 A/B/C/D/E/F) driven by 7.5 kW electric motors (50 RPM) and gearboxes (1:60 ratio) to mix the material, increase heating efficiency, reduce retention time, and circulate the melted bitumen to eliminate dissolved water, resulting in a homogeneous melt. Covered with a carbon steel roof with service hatches, it connects to an air duct (30x60 cm) linked to 2 air blowers (AB-01A/B) (one operating, one standby) at 22.5 kW / 1500 RPM. These extract water vapor and sulfur fumes, sending them to a scrubber before atmospheric release and water recycling. o 3-2-2: Primary Collection Tank (V-01): A carbon steel tank (12-14 mm thick) with a maximum capacity of 125 tons (10m L x 5m W x 3m H). It connects directly to the primary tank (TK-01) via channels and movable gates to receive only liquid raw material. It contains thermal oil pipes to maintain the liquid raw material at 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum outer cover. Impurities larger than 35 mm are removed and collected in a waste tank. o 3-2-3: Screw Conveyors (SC-01 A/B): Carbon steel screw conveyors with a double-jacketed outer cover filled with thermal oil to maintain the 140°C temperature. Driven by 22.5 kW electric motors (3000 RPM) with 1:40 gearboxes, they transport the liquid raw material to the preliminary filtration unit. 4. Purification Unit Removes suspended impurities from the liquid raw material in two stages: • 4-1: Preliminary Purification Tank (V-02): A carbon steel tank (12-14 mm thick, 125-ton capacity, 5m L x 10m W x 3m H). Receives liquid raw material from the primary collection tank. Contains thermal oil pipes to maintain 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Impurities larger than 15 mm are removed to a waste tank. Material is pumped to the final filtration stage via gear pumps (GP-01 A/B) (one operating, one standby) at 22.5 kW / 1000 RPM. • 4-2: Final Filtration Unit (FT-01): Removes remaining impurities by passing liquids through box filters arranged in 2 trains (8 per train). They feature a two-layer Stainless Steel filter mesh (specified microns) wrapped around square boxes. Liquid enters from the outside, and pure liquid is collected from the inside via a pipe network connected to a manifold. This is driven by two vacuum pumps (VP-01A/B) connected to the raw material tanks. 5. Raw Material Tanks (V-03 A-J) Ten carbon steel tanks (2.5m diameter, 9m length, 14 mm thickness, 45-ton max capacity) equipped with thermal oil heating coils. They receive, store, and prepare the purified raw material for the subsequent cooking reaction. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Connected by a pipe/valve network, the material is pumped via two centrifugal pumps (P-01 A/B) at 22.5 kW / 3000 RPM to the reactor unit. The tanks connect to a pipe network driven by vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM, pushing heating gases and vapors to the gas washing tank (V-14). 6. Reactor (Cooking) Unit (V-04 A/B) Consists of three reactors (55 tons each) that prepare the raw material for vacuum distillation and extract light naphtha compounds. • 6-1: Cooking Process: o 6-1-1: Catalyst System: Consists of two tanks. One prepares the catalyst mixture (1.5m dia, 4m H, 8mm carbon steel) with a mixer (MX-03) driven by a hydromotor and 1:40 gearbox. The second stores Gas Oil added to the preparation unit (1.5m dia, 1m H, 5mm carbon steel) with a 0.5 HP centrifugal pump. o 6-1-2: Reaction Tanks (V-04/05/06A): Three carbon steel tanks (2.8m dia, 9m L, 14mm thick, 55-ton max). Each has 2 Stainless Steel mixers (MX-02 A/B/C/D/E/F) driven by a 7.5 kW motor (1500 RPM) with a 1:40 gearbox. Contains an internal heating system powered by a Gas Oil burner to raise the temperature to 180°C. Catalyst is injected via dosing pumps (DP-01A/B) to increase naphtha extraction efficiency. Material is circulated during cooking by two centrifugal pumps per reactor (P-04A/B/C/D/E/F) (one active, one standby) to reduce retention time to 3-4 hours. After cooking, material is moved to the attached tank (V-04/05/06B) for storage before distillation. Fully insulated. o 6-1-3: Cooked Material Tank (V-04/05/06B): Carbon steel tank (2.8m dia, 9m L, 14mm thick) with thermal oil pipes to maintain 190-200°C. Fully insulated. Material is pumped to the vacuum distillation tower via centrifugal pumps (P-05A/B) (one active, one standby) at 22.5 kW / 3000 RPM. 7. Raw Naphtha Storage Unit Collects and condenses naphtha extracted during cooking. • 7-1-1: Raw Naphtha Tanks (V-07A/B/C): Three vertical Stainless Steel 304 tanks (1.5m dia, 5m H) connected to three heat exchangers and two pump pairs. Equipped internally with water spray nozzles on a ring pipe to wash non-condensable gases. • 7-1-2: Heat Exchangers (HE-01A/B/C): Condense naphtha vapors from 140°C down to 40°C using water from the cooling tower. Connected in series. Shell & Tube type, carbon steel (510 mm dia, 6m L) with 70 tubes (0.75-inch dia) in two rows of 35. Includes internal baffles for efficiency. • 7-1-3: Supporting Pumps: Vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM draw naphtha vapors from reactors to the heat exchangers, pushing non-condensable gases to the scrubber (V-14). Centrifugal pumps (P-02A/B) at 11.5 kW / 1500 RPM transport liquid raw naphtha to the Bleaching Unit. 8. Vacuum Distillation Unit The core of the plant, separating remaining light compounds and producing hard asphalt. • 8-1-1: Vacuum Distillation Tower: A vertical tower (~16m total height, 14mm carbon steel). Bottom section (Reboiler) is 3.5m dia x 1.2m H; top section is 1.5m dia x 12m H. Fully insulated. Fed with cooked material at 190-200°C via pumps (P-05A/B). To start extraction (remaining naphtha, Gas Oil, diesel), temperature is raised to 240-250°C using Heating Coil 1 via pumps (P-08A/B) at 55 kW / 3000 RPM, with continuous circulation via pumps (P-07A/B). Vacuum pumps (VP-03A/B) maintain 0.3-0.5 mbar pressure. Light compounds are extracted, condensed (HE-02A/B/C), and stored (V-08/09/10 A/B) over 2.5-3 hours. Afterward, material is heated via Heating Coil 2 to 320-340°C to finalize extraction and produce hard bitumen. Product is extracted via pumps (P-07A/B) at ~320°C, cooled via cooling tower coils, and sent to final tanks (V-18A/B/C). Batch processing takes 6-7 hours daily; continuous operation is possible. • 8-1-2: Supporting Pumps: Vacuum pumps (VP-03A/B) at 5.5 kW / 3000 RPM draw light vapors for condensation. Circulation centrifugal pumps (P-08A/B) at 55 kW move hot material to heating coils; (P-07A/B) circulate material and pump final bitumen product. • 8-1-3: Heating Coils 1 & 2: Carbon steel 4-inch diameter coils heated externally by a Gas Oil burner. Connected in series to heat liquid bitumen in two stages to prevent degradation. • 8-2: Heat Exchangers (HE-02A/B/C): Condense light compound vapors from 240°C to 40°C. Shell & Tube type, carbon steel (600 mm dia, 6m L) with 80 tubes (1-inch dia) in two rows of 40, equipped with baffles. • 8-3: Light Compound Tanks (V-08A/B, V-09A/B, V-10A/B): Six horizontal carbon steel tanks (1.5m dia, 4.5m L, 14mm thick). Receive condensates, linked to heat exchangers and vacuum pumps. Liquids are pumped to the Bleaching Unit via centrifugal pumps (P-06A/B) at 7.5 kW / 1500 RPM. 9. Bleaching Unit Improves the specifications of raw light compounds for local use and marketing. • 9-1: Collection Tank (V-11): Horizontal carbon steel tank (1m dia, 2.5m L, 14mm thick) placed above the system to store and distribute light compounds to the bleaching columns. • 9-2: Bleaching Columns (V-12A/B/C): Three vertical carbon steel vessels (1m dia, 4.5m H, 14mm thick). Contain a 15 cm catalyst layer on trays to bleach raw liquids into high-quality compounds, collected in a bottom horizontal tank. The catalyst is a calcined mixture of Bentonite and Zinc Oxide granules (2-3 mm) homogenized in water, which can be reactivated with steam and 5% HCl. • 9-3: Supporting Pumps: Vacuum pumps (VP-04A/B) at 5.5 kW extract vapors to the scrubber. Centrifugal pumps (P-09A/B) at 7.5 kW push bleached liquids to final tanks. 10. Production Tanks (V-13 A-F & V-18 A-C) • Light Products: Six horizontal carbon steel tanks (2.8m dia, 9m L, 55-ton capacity). V-13A/B for light naphtha, V-13C/D for Gas Oil, V-13E/F for diesel. • Asphalt: Three vertical carbon steel tanks (V-18A/B/C) (5m dia, 9m H). Equipped with thermal oil heating coils to keep asphalt liquid. Fully insulated (90 kg/m³ glass wool, 1.8mm aluminum cover). 11. Supporting Systems • 11-1: Gas Washing (Scrubber) System: Treats non-condensable gases before atmospheric release. Contains V-14 washing tank (1m dia, 2.8m L), a 500mm Flare stack with 3 ignitors, and a 1m x 1m LPG tank (V-15) for ignition. • 11-2: Cooling Tower: Provides cooling water for heat exchangers. Galvanized pressed steel basin (16m L x 2.4m W x 2.8m H), FRP casing, top fans, water distributors, and fill media. Includes Accumulator tank V-20 (1.5m dia, 2m L) and 11 kW pushing pumps (P-14A/B). • 11-3: Thermal Oil Boilers: Includes oil tank, heating boiler, oil pumps, and heating accelerators. • 11-4: Distillation Tower Raw Boilers • 11-5: Power Generation System • 11-6: Production Laboratory • 11-7: Control and Operation Room • 11-8: Catalyst System: Contains a vertical diesel tank (1m dia, 1.5m H) with a 1 kW centrifugal pump (P-11). Two vertical carbon steel tanks (V-17A/B, 1.5m dia, 4.5m H) with an MX-03 hydromotor mixer (7.5 kW, 30 RPM). V-17A is for preparation, V-17B pumps catalyst to the reactor. ________________________________________ Catalyst Chemical Components & Formulations 1. Alumina (Al2O3): Enhances the cracking of chemical bonds in heavy bitumen chains and increases Gas Oil extraction yield. 2. Manganese Dioxide (MnO2): Accelerates the reaction, reduces reaction time, and acts as a gasoline improver. 3. Silicon Dioxide (SiO2): Increases acceleration and reduces reaction time. 4. Iron Oxides (Fe2O): Accelerates the reaction, prevents pipe corrosion, and stops sulfur and wax from sticking to pipes and pumps. Weight Ratios (WT/WT) to Produce One Barrel (200 Liters) of Catalyst: 1. Alumina: Varies by feed: 2-2.5% for Bitumen / 4-5% for Vacuum Residue (VR) / 2-2.5% for Heavy Fuel Oil (HFO). To increase Gas Oil/Diesel (Light fuel) yield, Alumina can be added up to a maximum of 10%. 2. Manganese Dioxide: 2-2.5% for HFO / 4-5% for VR and Bitumen. 3. Iron Oxides: 2-2.5% across all feeds. 4. Silicon Dioxide: 2-2.5% for HFO / 4-5% for Bitumen and VR. 5. Remaining Volume: Filled with C-oil. Note: One barrel (200 Liters) of this mixture is added for every 5 tons of HFO, VR, or Bitumen. Manufacturing Mechanism: All components are placed in a tank, initially mixed with water, and heated to 80-120°C with continuous mixing (20-30 RPM). Once foam is generated, the product is allowed to cool to 80°C. The heating process up to 120°C is repeated 3 or 4 times until foaming ceases. Finally, the temperature is raised to 150°C, and the mixture is topped off to 200 liters using C-oil. To further improve light compound specifications, Zinc Oxide (300 grams) is mixed with 20 kg of Bentonite in C-oil. This is added alongside the catalyst at a ratio of 1/5 barrel of catalyst added to the reactor.
015
Hero
Specialized Bitumen Refining Plant Governorate: Anbar / Hit District Production Capacity: ( ) Tons/Day The city of Hit in the Anbar Governorate is considered one of the most famous areas in the world for its natural "bitumen springs," which have been used for thousands of years (dating back to the Babylonian and Assyrian eras). However, processing this bitumen for modern use requires technical steps to transform it from a raw material into a viable product for construction or industrial applications. Bitumen emerges from these springs as a highly viscous liquid mixed with sulfurous water, salts, and mud impurities. This "Natural Asphalt" differs from petroleum bitumen produced in refineries, and it can also appear in the form of rocky or spongy blocks mixed with mud. To obtain industrially usable products from this bitumen, specifically for: 1. Waterproofing (Felt/Membranes): Considered one of the best coating materials for building foundations to prevent moisture leakage due to its high resistance to hydrolysis. 2. Road Paving: Mixed with gravel and sand to produce asphalt concrete. It is characterized by exceptionally high cohesive strength compared to industrial bitumen. The natural bitumen from these springs must undergo several fundamental processing stages to become industrially viable: 1. Collection and Sedimentation: Bitumen is collected from the springs or quarry sites and left in designated basins to allow the sulfurous water to naturally separate (due to density differences). 2. Primary Heating: The raw bitumen is placed in large boilers to: a. Evaporate the remaining water. b. Reduce viscosity for easier handling. 3. Filtration and Purification: The heated bitumen is screened to remove solid impurities such as gravel, dirt, and suspended organic matter. 4. Secondary Heating and Cooking: The temperature of the bitumen is raised, improving agents are added, and it is prepared for the vacuum distillation process. 5. Vacuum Distillation: The distillation process is conducted under low pressure (vacuum pressure), which allows for: a. The separation of light oils and volatile substances at lower temperatures. b. The production of highly pure "Hard Asphalt," which is highly demanded in the construction industry. ________________________________________ Plant Components and Operational Stages The specialized bitumen plant for processing raw natural bitumen (in both liquid and solid states) consists of a range of specialized equipment designed according to the latest international standards. This equipment aligns with the technical and engineering requirements for bitumen products, complies with Iraqi standard specifications, and adheres to environmental considerations in the Anbar Governorate. 1. Extraction Stage The raw material (solid or liquid) is extracted from quarries designated by the Geological Survey Authority using specialized mechanical equipment. It is stored in stocks or special basins for solid materials, then transported to the refinery site using specialized transport vehicles of various capacities. 2. Storage Stage The raw materials are stored in designated yards to ensure a sufficient inventory for continuous, uninterrupted production for no less than 7 working days. 3. Raw Material Preparation and Primary Heating Stage Raw materials are fed into the plant via hydraulic lifts. This stage includes: • 3-1: Crushing and Digestion: Solid raw materials from the quarries are broken down and digested using a digester (SH-01) equipped with double blades driven by hydraulic motors (22.5 kW capacity). The digester is 5 meters long and 1.80 meters in diameter, made of carbon steel, with Stainless Steel 304 blades. It includes a Stainless Steel piston driven by a 7.5 kW electric motor. • 3-2: Primary Heating: This melts the bitumen and improves pumpability through pipes and pumps. • 3-3: Efficiency Enhancement: To increase melting efficiency, Gas Oil is added to the primary heating basin at a ratio of 1:5 per ton of solid raw material entering the basin (this ratio decreases when using liquid raw bitumen). o 3-2-1: Primary Melting Basin (TK-01): Raw material is heated in a concrete tank (25m L x 5m W x 3m H) with a maximum storage capacity of 300 tons. Heating pipes circulate thermal fluid (oil) at 125°C, with a retention time of 4-6 hours. The tank is internally lined with 6-8 mm carbon steel plates to protect the heating pipes from corrosion. It contains 8 Stainless Steel 304 mixers (MX-01 A/B/C/D/E/F) driven by 7.5 kW electric motors (50 RPM) and gearboxes (1:60 ratio) to mix the material, increase heating efficiency, reduce retention time, and circulate the melted bitumen to eliminate dissolved water, resulting in a homogeneous melt. Covered with a carbon steel roof with service hatches, it connects to an air duct (30x60 cm) linked to 2 air blowers (AB-01A/B) (one operating, one standby) at 22.5 kW / 1500 RPM. These extract water vapor and sulfur fumes, sending them to a scrubber before atmospheric release and water recycling. o 3-2-2: Primary Collection Tank (V-01): A carbon steel tank (12-14 mm thick) with a maximum capacity of 125 tons (10m L x 5m W x 3m H). It connects directly to the primary tank (TK-01) via channels and movable gates to receive only liquid raw material. It contains thermal oil pipes to maintain the liquid raw material at 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum outer cover. Impurities larger than 35 mm are removed and collected in a waste tank. o 3-2-3: Screw Conveyors (SC-01 A/B): Carbon steel screw conveyors with a double-jacketed outer cover filled with thermal oil to maintain the 140°C temperature. Driven by 22.5 kW electric motors (3000 RPM) with 1:40 gearboxes, they transport the liquid raw material to the preliminary filtration unit. 4. Purification Unit Removes suspended impurities from the liquid raw material in two stages: • 4-1: Preliminary Purification Tank (V-02): A carbon steel tank (12-14 mm thick, 125-ton capacity, 5m L x 10m W x 3m H). Receives liquid raw material from the primary collection tank. Contains thermal oil pipes to maintain 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Impurities larger than 15 mm are removed to a waste tank. Material is pumped to the final filtration stage via gear pumps (GP-01 A/B) (one operating, one standby) at 22.5 kW / 1000 RPM. • 4-2: Final Filtration Unit (FT-01): Removes remaining impurities by passing liquids through box filters arranged in 2 trains (8 per train). They feature a two-layer Stainless Steel filter mesh (specified microns) wrapped around square boxes. Liquid enters from the outside, and pure liquid is collected from the inside via a pipe network connected to a manifold. This is driven by two vacuum pumps (VP-01A/B) connected to the raw material tanks. 5. Raw Material Tanks (V-03 A-J) Ten carbon steel tanks (2.5m diameter, 9m length, 14 mm thickness, 45-ton max capacity) equipped with thermal oil heating coils. They receive, store, and prepare the purified raw material for the subsequent cooking reaction. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Connected by a pipe/valve network, the material is pumped via two centrifugal pumps (P-01 A/B) at 22.5 kW / 3000 RPM to the reactor unit. The tanks connect to a pipe network driven by vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM, pushing heating gases and vapors to the gas washing tank (V-14). 6. Reactor (Cooking) Unit (V-04 A/B) Consists of three reactors (55 tons each) that prepare the raw material for vacuum distillation and extract light naphtha compounds. • 6-1: Cooking Process: o 6-1-1: Catalyst System: Consists of two tanks. One prepares the catalyst mixture (1.5m dia, 4m H, 8mm carbon steel) with a mixer (MX-03) driven by a hydromotor and 1:40 gearbox. The second stores Gas Oil added to the preparation unit (1.5m dia, 1m H, 5mm carbon steel) with a 0.5 HP centrifugal pump. o 6-1-2: Reaction Tanks (V-04/05/06A): Three carbon steel tanks (2.8m dia, 9m L, 14mm thick, 55-ton max). Each has 2 Stainless Steel mixers (MX-02 A/B/C/D/E/F) driven by a 7.5 kW motor (1500 RPM) with a 1:40 gearbox. Contains an internal heating system powered by a Gas Oil burner to raise the temperature to 180°C. Catalyst is injected via dosing pumps (DP-01A/B) to increase naphtha extraction efficiency. Material is circulated during cooking by two centrifugal pumps per reactor (P-04A/B/C/D/E/F) (one active, one standby) to reduce retention time to 3-4 hours. After cooking, material is moved to the attached tank (V-04/05/06B) for storage before distillation. Fully insulated. o 6-1-3: Cooked Material Tank (V-04/05/06B): Carbon steel tank (2.8m dia, 9m L, 14mm thick) with thermal oil pipes to maintain 190-200°C. Fully insulated. Material is pumped to the vacuum distillation tower via centrifugal pumps (P-05A/B) (one active, one standby) at 22.5 kW / 3000 RPM. 7. Raw Naphtha Storage Unit Collects and condenses naphtha extracted during cooking. • 7-1-1: Raw Naphtha Tanks (V-07A/B/C): Three vertical Stainless Steel 304 tanks (1.5m dia, 5m H) connected to three heat exchangers and two pump pairs. Equipped internally with water spray nozzles on a ring pipe to wash non-condensable gases. • 7-1-2: Heat Exchangers (HE-01A/B/C): Condense naphtha vapors from 140°C down to 40°C using water from the cooling tower. Connected in series. Shell & Tube type, carbon steel (510 mm dia, 6m L) with 70 tubes (0.75-inch dia) in two rows of 35. Includes internal baffles for efficiency. • 7-1-3: Supporting Pumps: Vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM draw naphtha vapors from reactors to the heat exchangers, pushing non-condensable gases to the scrubber (V-14). Centrifugal pumps (P-02A/B) at 11.5 kW / 1500 RPM transport liquid raw naphtha to the Bleaching Unit. 8. Vacuum Distillation Unit The core of the plant, separating remaining light compounds and producing hard asphalt. • 8-1-1: Vacuum Distillation Tower: A vertical tower (~16m total height, 14mm carbon steel). Bottom section (Reboiler) is 3.5m dia x 1.2m H; top section is 1.5m dia x 12m H. Fully insulated. Fed with cooked material at 190-200°C via pumps (P-05A/B). To start extraction (remaining naphtha, Gas Oil, diesel), temperature is raised to 240-250°C using Heating Coil 1 via pumps (P-08A/B) at 55 kW / 3000 RPM, with continuous circulation via pumps (P-07A/B). Vacuum pumps (VP-03A/B) maintain 0.3-0.5 mbar pressure. Light compounds are extracted, condensed (HE-02A/B/C), and stored (V-08/09/10 A/B) over 2.5-3 hours. Afterward, material is heated via Heating Coil 2 to 320-340°C to finalize extraction and produce hard bitumen. Product is extracted via pumps (P-07A/B) at ~320°C, cooled via cooling tower coils, and sent to final tanks (V-18A/B/C). Batch processing takes 6-7 hours daily; continuous operation is possible. • 8-1-2: Supporting Pumps: Vacuum pumps (VP-03A/B) at 5.5 kW / 3000 RPM draw light vapors for condensation. Circulation centrifugal pumps (P-08A/B) at 55 kW move hot material to heating coils; (P-07A/B) circulate material and pump final bitumen product. • 8-1-3: Heating Coils 1 & 2: Carbon steel 4-inch diameter coils heated externally by a Gas Oil burner. Connected in series to heat liquid bitumen in two stages to prevent degradation. • 8-2: Heat Exchangers (HE-02A/B/C): Condense light compound vapors from 240°C to 40°C. Shell & Tube type, carbon steel (600 mm dia, 6m L) with 80 tubes (1-inch dia) in two rows of 40, equipped with baffles. • 8-3: Light Compound Tanks (V-08A/B, V-09A/B, V-10A/B): Six horizontal carbon steel tanks (1.5m dia, 4.5m L, 14mm thick). Receive condensates, linked to heat exchangers and vacuum pumps. Liquids are pumped to the Bleaching Unit via centrifugal pumps (P-06A/B) at 7.5 kW / 1500 RPM. 9. Bleaching Unit Improves the specifications of raw light compounds for local use and marketing. • 9-1: Collection Tank (V-11): Horizontal carbon steel tank (1m dia, 2.5m L, 14mm thick) placed above the system to store and distribute light compounds to the bleaching columns. • 9-2: Bleaching Columns (V-12A/B/C): Three vertical carbon steel vessels (1m dia, 4.5m H, 14mm thick). Contain a 15 cm catalyst layer on trays to bleach raw liquids into high-quality compounds, collected in a bottom horizontal tank. The catalyst is a calcined mixture of Bentonite and Zinc Oxide granules (2-3 mm) homogenized in water, which can be reactivated with steam and 5% HCl. • 9-3: Supporting Pumps: Vacuum pumps (VP-04A/B) at 5.5 kW extract vapors to the scrubber. Centrifugal pumps (P-09A/B) at 7.5 kW push bleached liquids to final tanks. 10. Production Tanks (V-13 A-F & V-18 A-C) • Light Products: Six horizontal carbon steel tanks (2.8m dia, 9m L, 55-ton capacity). V-13A/B for light naphtha, V-13C/D for Gas Oil, V-13E/F for diesel. • Asphalt: Three vertical carbon steel tanks (V-18A/B/C) (5m dia, 9m H). Equipped with thermal oil heating coils to keep asphalt liquid. Fully insulated (90 kg/m³ glass wool, 1.8mm aluminum cover). 11. Supporting Systems • 11-1: Gas Washing (Scrubber) System: Treats non-condensable gases before atmospheric release. Contains V-14 washing tank (1m dia, 2.8m L), a 500mm Flare stack with 3 ignitors, and a 1m x 1m LPG tank (V-15) for ignition. • 11-2: Cooling Tower: Provides cooling water for heat exchangers. Galvanized pressed steel basin (16m L x 2.4m W x 2.8m H), FRP casing, top fans, water distributors, and fill media. Includes Accumulator tank V-20 (1.5m dia, 2m L) and 11 kW pushing pumps (P-14A/B). • 11-3: Thermal Oil Boilers: Includes oil tank, heating boiler, oil pumps, and heating accelerators. • 11-4: Distillation Tower Raw Boilers • 11-5: Power Generation System • 11-6: Production Laboratory • 11-7: Control and Operation Room • 11-8: Catalyst System: Contains a vertical diesel tank (1m dia, 1.5m H) with a 1 kW centrifugal pump (P-11). Two vertical carbon steel tanks (V-17A/B, 1.5m dia, 4.5m H) with an MX-03 hydromotor mixer (7.5 kW, 30 RPM). V-17A is for preparation, V-17B pumps catalyst to the reactor. ________________________________________ Catalyst Chemical Components & Formulations 1. Alumina (Al2O3): Enhances the cracking of chemical bonds in heavy bitumen chains and increases Gas Oil extraction yield. 2. Manganese Dioxide (MnO2): Accelerates the reaction, reduces reaction time, and acts as a gasoline improver. 3. Silicon Dioxide (SiO2): Increases acceleration and reduces reaction time. 4. Iron Oxides (Fe2O): Accelerates the reaction, prevents pipe corrosion, and stops sulfur and wax from sticking to pipes and pumps. Weight Ratios (WT/WT) to Produce One Barrel (200 Liters) of Catalyst: 1. Alumina: Varies by feed: 2-2.5% for Bitumen / 4-5% for Vacuum Residue (VR) / 2-2.5% for Heavy Fuel Oil (HFO). To increase Gas Oil/Diesel (Light fuel) yield, Alumina can be added up to a maximum of 10%. 2. Manganese Dioxide: 2-2.5% for HFO / 4-5% for VR and Bitumen. 3. Iron Oxides: 2-2.5% across all feeds. 4. Silicon Dioxide: 2-2.5% for HFO / 4-5% for Bitumen and VR. 5. Remaining Volume: Filled with C-oil. Note: One barrel (200 Liters) of this mixture is added for every 5 tons of HFO, VR, or Bitumen. Manufacturing Mechanism: All components are placed in a tank, initially mixed with water, and heated to 80-120°C with continuous mixing (20-30 RPM). Once foam is generated, the product is allowed to cool to 80°C. The heating process up to 120°C is repeated 3 or 4 times until foaming ceases. Finally, the temperature is raised to 150°C, and the mixture is topped off to 200 liters using C-oil. To further improve light compound specifications, Zinc Oxide (300 grams) is mixed with 20 kg of Bentonite in C-oil. This is added alongside the catalyst at a ratio of 1/5 barrel of catalyst added to the reactor.
010
Hero
"Behold a marvel of design—an egg-shaped tent structure that emanates an ethereal glow, inviting you into its enchanting realm. Crafted from a lightweight aluminum framework, this innovative structure features flexible rods that bend and contour effortlessly. The framework forms a circular base and a smaller circle at the top, seamlessly connected by vertical rods that resemble the ribs of an egg. The entire ovoid structure is cloaked in a resilient fabric, specifically chosen for its suitability in tent and canopy construction. The fabric elegantly envelopes the entire surface of the egg-shaped tent, accentuating the seamless and organic form of the structure. Not a single curve or contour is left untouched, as the fabric adheres flawlessly to every edge and fold. The fabric embraces the tent with a gentle embrace, creating an alluring presence that emphasizes its resemblance to a magnificent hatching egg. Step through the grand entrance, and you will discover a world of tranquility and wonder. Inside, there is only emptiness, illuminated by a soft, ambient light that bathes the interior with a serene glow. The absence of physical objects accentuates the sense of spaciousness and invites a deep sense of introspection. The space becomes a sanctuary for personal reflection and connection with oneself. As you gaze upon this remarkable structure, it seamlessly integrates with the natural surroundings, becoming a harmonious element of the landscape. The fabric-covered egg-shaped tent stands as a testament to human ingenuity, offering a captivating and immersive experience. Its exterior showcases the gentle glow that emanates from within, captivating all who behold its beauty. The size of the tent, with its complete coverage and ovoid structure, is designed for a single occupant, providing an intimate and personal space for solace and reflection. The lightweight aluminum framework, meticulously designed, forms a circular base and a smaller circle at the top, with vertical rods extending from the upper ring to the lower one, connecting them to shape the rib-like structure of the egg. Step through the open entrance, and you will enter a sanctuary of serenity, where the only companions are the soft glow and the empty expanse. Allow the encompassing light and the tranquil haven to embrace you, as you embark on a journey of introspection and connection within the allure of this egg-shaped tent."
089
DreamShaper
generate this business card: Layout 1: Modern Minimalist Colors: Primarily Atlantic Blue and Aluminum Snow. Layout:Left Side: Professional headshot in a circular or square frame. Right Side:Company Name: "SAFETY COMPLIANCE PROS" in bold, sans-serif font. Personal Name in a slightly smaller, sans-serif font. Contact information icons aligned vertically:Email icon Phone icon Location icon Geometric Corner Shape: A subtle, minimalist geometric shape in Aluminum Snow, placed at the top right corner of the card.
044
FLUX
Specialized Bitumen Refining Plant Governorate: Anbar / Hit District Production Capacity: ( ) Tons/Day The city of Hit in the Anbar Governorate is considered one of the most famous areas in the world for its natural "bitumen springs," which have been used for thousands of years (dating back to the Babylonian and Assyrian eras). However, processing this bitumen for modern use requires technical steps to transform it from a raw material into a viable product for construction or industrial applications. Bitumen emerges from these springs as a highly viscous liquid mixed with sulfurous water, salts, and mud impurities. This "Natural Asphalt" differs from petroleum bitumen produced in refineries, and it can also appear in the form of rocky or spongy blocks mixed with mud. To obtain industrially usable products from this bitumen, specifically for: 1. Waterproofing (Felt/Membranes): Considered one of the best coating materials for building foundations to prevent moisture leakage due to its high resistance to hydrolysis. 2. Road Paving: Mixed with gravel and sand to produce asphalt concrete. It is characterized by exceptionally high cohesive strength compared to industrial bitumen. The natural bitumen from these springs must undergo several fundamental processing stages to become industrially viable: 1. Collection and Sedimentation: Bitumen is collected from the springs or quarry sites and left in designated basins to allow the sulfurous water to naturally separate (due to density differences). 2. Primary Heating: The raw bitumen is placed in large boilers to: a. Evaporate the remaining water. b. Reduce viscosity for easier handling. 3. Filtration and Purification: The heated bitumen is screened to remove solid impurities such as gravel, dirt, and suspended organic matter. 4. Secondary Heating and Cooking: The temperature of the bitumen is raised, improving agents are added, and it is prepared for the vacuum distillation process. 5. Vacuum Distillation: The distillation process is conducted under low pressure (vacuum pressure), which allows for: a. The separation of light oils and volatile substances at lower temperatures. b. The production of highly pure "Hard Asphalt," which is highly demanded in the construction industry. ________________________________________ Plant Components and Operational Stages The specialized bitumen plant for processing raw natural bitumen (in both liquid and solid states) consists of a range of specialized equipment designed according to the latest international standards. This equipment aligns with the technical and engineering requirements for bitumen products, complies with Iraqi standard specifications, and adheres to environmental considerations in the Anbar Governorate. 1. Extraction Stage The raw material (solid or liquid) is extracted from quarries designated by the Geological Survey Authority using specialized mechanical equipment. It is stored in stocks or special basins for solid materials, then transported to the refinery site using specialized transport vehicles of various capacities. 2. Storage Stage The raw materials are stored in designated yards to ensure a sufficient inventory for continuous, uninterrupted production for no less than 7 working days. 3. Raw Material Preparation and Primary Heating Stage Raw materials are fed into the plant via hydraulic lifts. This stage includes: • 3-1: Crushing and Digestion: Solid raw materials from the quarries are broken down and digested using a digester (SH-01) equipped with double blades driven by hydraulic motors (22.5 kW capacity). The digester is 5 meters long and 1.80 meters in diameter, made of carbon steel, with Stainless Steel 304 blades. It includes a Stainless Steel piston driven by a 7.5 kW electric motor. • 3-2: Primary Heating: This melts the bitumen and improves pumpability through pipes and pumps. • 3-3: Efficiency Enhancement: To increase melting efficiency, Gas Oil is added to the primary heating basin at a ratio of 1:5 per ton of solid raw material entering the basin (this ratio decreases when using liquid raw bitumen). o 3-2-1: Primary Melting Basin (TK-01): Raw material is heated in a concrete tank (25m L x 5m W x 3m H) with a maximum storage capacity of 300 tons. Heating pipes circulate thermal fluid (oil) at 125°C, with a retention time of 4-6 hours. The tank is internally lined with 6-8 mm carbon steel plates to protect the heating pipes from corrosion. It contains 8 Stainless Steel 304 mixers (MX-01 A/B/C/D/E/F) driven by 7.5 kW electric motors (50 RPM) and gearboxes (1:60 ratio) to mix the material, increase heating efficiency, reduce retention time, and circulate the melted bitumen to eliminate dissolved water, resulting in a homogeneous melt. Covered with a carbon steel roof with service hatches, it connects to an air duct (30x60 cm) linked to 2 air blowers (AB-01A/B) (one operating, one standby) at 22.5 kW / 1500 RPM. These extract water vapor and sulfur fumes, sending them to a scrubber before atmospheric release and water recycling. o 3-2-2: Primary Collection Tank (V-01): A carbon steel tank (12-14 mm thick) with a maximum capacity of 125 tons (10m L x 5m W x 3m H). It connects directly to the primary tank (TK-01) via channels and movable gates to receive only liquid raw material. It contains thermal oil pipes to maintain the liquid raw material at 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum outer cover. Impurities larger than 35 mm are removed and collected in a waste tank. o 3-2-3: Screw Conveyors (SC-01 A/B): Carbon steel screw conveyors with a double-jacketed outer cover filled with thermal oil to maintain the 140°C temperature. Driven by 22.5 kW electric motors (3000 RPM) with 1:40 gearboxes, they transport the liquid raw material to the preliminary filtration unit. 4. Purification Unit Removes suspended impurities from the liquid raw material in two stages: • 4-1: Preliminary Purification Tank (V-02): A carbon steel tank (12-14 mm thick, 125-ton capacity, 5m L x 10m W x 3m H). Receives liquid raw material from the primary collection tank. Contains thermal oil pipes to maintain 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Impurities larger than 15 mm are removed to a waste tank. Material is pumped to the final filtration stage via gear pumps (GP-01 A/B) (one operating, one standby) at 22.5 kW / 1000 RPM. • 4-2: Final Filtration Unit (FT-01): Removes remaining impurities by passing liquids through box filters arranged in 2 trains (8 per train). They feature a two-layer Stainless Steel filter mesh (specified microns) wrapped around square boxes. Liquid enters from the outside, and pure liquid is collected from the inside via a pipe network connected to a manifold. This is driven by two vacuum pumps (VP-01A/B) connected to the raw material tanks. 5. Raw Material Tanks (V-03 A-J) Ten carbon steel tanks (2.5m diameter, 9m length, 14 mm thickness, 45-ton max capacity) equipped with thermal oil heating coils. They receive, store, and prepare the purified raw material for the subsequent cooking reaction. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Connected by a pipe/valve network, the material is pumped via two centrifugal pumps (P-01 A/B) at 22.5 kW / 3000 RPM to the reactor unit. The tanks connect to a pipe network driven by vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM, pushing heating gases and vapors to the gas washing tank (V-14). 6. Reactor (Cooking) Unit (V-04 A/B) Consists of three reactors (55 tons each) that prepare the raw material for vacuum distillation and extract light naphtha compounds. • 6-1: Cooking Process: o 6-1-1: Catalyst System: Consists of two tanks. One prepares the catalyst mixture (1.5m dia, 4m H, 8mm carbon steel) with a mixer (MX-03) driven by a hydromotor and 1:40 gearbox. The second stores Gas Oil added to the preparation unit (1.5m dia, 1m H, 5mm carbon steel) with a 0.5 HP centrifugal pump. o 6-1-2: Reaction Tanks (V-04/05/06A): Three carbon steel tanks (2.8m dia, 9m L, 14mm thick, 55-ton max). Each has 2 Stainless Steel mixers (MX-02 A/B/C/D/E/F) driven by a 7.5 kW motor (1500 RPM) with a 1:40 gearbox. Contains an internal heating system powered by a Gas Oil burner to raise the temperature to 180°C. Catalyst is injected via dosing pumps (DP-01A/B) to increase naphtha extraction efficiency. Material is circulated during cooking by two centrifugal pumps per reactor (P-04A/B/C/D/E/F) (one active, one standby) to reduce retention time to 3-4 hours. After cooking, material is moved to the attached tank (V-04/05/06B) for storage before distillation. Fully insulated. o 6-1-3: Cooked Material Tank (V-04/05/06B): Carbon steel tank (2.8m dia, 9m L, 14mm thick) with thermal oil pipes to maintain 190-200°C. Fully insulated. Material is pumped to the vacuum distillation tower via centrifugal pumps (P-05A/B) (one active, one standby) at 22.5 kW / 3000 RPM. 7. Raw Naphtha Storage Unit Collects and condenses naphtha extracted during cooking. • 7-1-1: Raw Naphtha Tanks (V-07A/B/C): Three vertical Stainless Steel 304 tanks (1.5m dia, 5m H) connected to three heat exchangers and two pump pairs. Equipped internally with water spray nozzles on a ring pipe to wash non-condensable gases. • 7-1-2: Heat Exchangers (HE-01A/B/C): Condense naphtha vapors from 140°C down to 40°C using water from the cooling tower. Connected in series. Shell & Tube type, carbon steel (510 mm dia, 6m L) with 70 tubes (0.75-inch dia) in two rows of 35. Includes internal baffles for efficiency. • 7-1-3: Supporting Pumps: Vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM draw naphtha vapors from reactors to the heat exchangers, pushing non-condensable gases to the scrubber (V-14). Centrifugal pumps (P-02A/B) at 11.5 kW / 1500 RPM transport liquid raw naphtha to the Bleaching Unit. 8. Vacuum Distillation Unit The core of the plant, separating remaining light compounds and producing hard asphalt. • 8-1-1: Vacuum Distillation Tower: A vertical tower (~16m total height, 14mm carbon steel). Bottom section (Reboiler) is 3.5m dia x 1.2m H; top section is 1.5m dia x 12m H. Fully insulated. Fed with cooked material at 190-200°C via pumps (P-05A/B). To start extraction (remaining naphtha, Gas Oil, diesel), temperature is raised to 240-250°C using Heating Coil 1 via pumps (P-08A/B) at 55 kW / 3000 RPM, with continuous circulation via pumps (P-07A/B). Vacuum pumps (VP-03A/B) maintain 0.3-0.5 mbar pressure. Light compounds are extracted, condensed (HE-02A/B/C), and stored (V-08/09/10 A/B) over 2.5-3 hours. Afterward, material is heated via Heating Coil 2 to 320-340°C to finalize extraction and produce hard bitumen. Product is extracted via pumps (P-07A/B) at ~320°C, cooled via cooling tower coils, and sent to final tanks (V-18A/B/C). Batch processing takes 6-7 hours daily; continuous operation is possible. • 8-1-2: Supporting Pumps: Vacuum pumps (VP-03A/B) at 5.5 kW / 3000 RPM draw light vapors for condensation. Circulation centrifugal pumps (P-08A/B) at 55 kW move hot material to heating coils; (P-07A/B) circulate material and pump final bitumen product. • 8-1-3: Heating Coils 1 & 2: Carbon steel 4-inch diameter coils heated externally by a Gas Oil burner. Connected in series to heat liquid bitumen in two stages to prevent degradation. • 8-2: Heat Exchangers (HE-02A/B/C): Condense light compound vapors from 240°C to 40°C. Shell & Tube type, carbon steel (600 mm dia, 6m L) with 80 tubes (1-inch dia) in two rows of 40, equipped with baffles. • 8-3: Light Compound Tanks (V-08A/B, V-09A/B, V-10A/B): Six horizontal carbon steel tanks (1.5m dia, 4.5m L, 14mm thick). Receive condensates, linked to heat exchangers and vacuum pumps. Liquids are pumped to the Bleaching Unit via centrifugal pumps (P-06A/B) at 7.5 kW / 1500 RPM. 9. Bleaching Unit Improves the specifications of raw light compounds for local use and marketing. • 9-1: Collection Tank (V-11): Horizontal carbon steel tank (1m dia, 2.5m L, 14mm thick) placed above the system to store and distribute light compounds to the bleaching columns. • 9-2: Bleaching Columns (V-12A/B/C): Three vertical carbon steel vessels (1m dia, 4.5m H, 14mm thick). Contain a 15 cm catalyst layer on trays to bleach raw liquids into high-quality compounds, collected in a bottom horizontal tank. The catalyst is a calcined mixture of Bentonite and Zinc Oxide granules (2-3 mm) homogenized in water, which can be reactivated with steam and 5% HCl. • 9-3: Supporting Pumps: Vacuum pumps (VP-04A/B) at 5.5 kW extract vapors to the scrubber. Centrifugal pumps (P-09A/B) at 7.5 kW push bleached liquids to final tanks. 10. Production Tanks (V-13 A-F & V-18 A-C) • Light Products: Six horizontal carbon steel tanks (2.8m dia, 9m L, 55-ton capacity). V-13A/B for light naphtha, V-13C/D for Gas Oil, V-13E/F for diesel. • Asphalt: Three vertical carbon steel tanks (V-18A/B/C) (5m dia, 9m H). Equipped with thermal oil heating coils to keep asphalt liquid. Fully insulated (90 kg/m³ glass wool, 1.8mm aluminum cover). 11. Supporting Systems • 11-1: Gas Washing (Scrubber) System: Treats non-condensable gases before atmospheric release. Contains V-14 washing tank (1m dia, 2.8m L), a 500mm Flare stack with 3 ignitors, and a 1m x 1m LPG tank (V-15) for ignition. • 11-2: Cooling Tower: Provides cooling water for heat exchangers. Galvanized pressed steel basin (16m L x 2.4m W x 2.8m H), FRP casing, top fans, water distributors, and fill media. Includes Accumulator tank V-20 (1.5m dia, 2m L) and 11 kW pushing pumps (P-14A/B). • 11-3: Thermal Oil Boilers: Includes oil tank, heating boiler, oil pumps, and heating accelerators. • 11-4: Distillation Tower Raw Boilers • 11-5: Power Generation System • 11-6: Production Laboratory • 11-7: Control and Operation Room • 11-8: Catalyst System: Contains a vertical diesel tank (1m dia, 1.5m H) with a 1 kW centrifugal pump (P-11). Two vertical carbon steel tanks (V-17A/B, 1.5m dia, 4.5m H) with an MX-03 hydromotor mixer (7.5 kW, 30 RPM). V-17A is for preparation, V-17B pumps catalyst to the reactor. ________________________________________ Catalyst Chemical Components & Formulations 1. Alumina (Al2O3): Enhances the cracking of chemical bonds in heavy bitumen chains and increases Gas Oil extraction yield. 2. Manganese Dioxide (MnO2): Accelerates the reaction, reduces reaction time, and acts as a gasoline improver. 3. Silicon Dioxide (SiO2): Increases acceleration and reduces reaction time. 4. Iron Oxides (Fe2O): Accelerates the reaction, prevents pipe corrosion, and stops sulfur and wax from sticking to pipes and pumps. Weight Ratios (WT/WT) to Produce One Barrel (200 Liters) of Catalyst: 1. Alumina: Varies by feed: 2-2.5% for Bitumen / 4-5% for Vacuum Residue (VR) / 2-2.5% for Heavy Fuel Oil (HFO). To increase Gas Oil/Diesel (Light fuel) yield, Alumina can be added up to a maximum of 10%. 2. Manganese Dioxide: 2-2.5% for HFO / 4-5% for VR and Bitumen. 3. Iron Oxides: 2-2.5% across all feeds. 4. Silicon Dioxide: 2-2.5% for HFO / 4-5% for Bitumen and VR. 5. Remaining Volume: Filled with C-oil. Note: One barrel (200 Liters) of this mixture is added for every 5 tons of HFO, VR, or Bitumen. Manufacturing Mechanism: All components are placed in a tank, initially mixed with water, and heated to 80-120°C with continuous mixing (20-30 RPM). Once foam is generated, the product is allowed to cool to 80°C. The heating process up to 120°C is repeated 3 or 4 times until foaming ceases. Finally, the temperature is raised to 150°C, and the mixture is topped off to 200 liters using C-oil. To further improve light compound specifications, Zinc Oxide (300 grams) is mixed with 20 kg of Bentonite in C-oil. This is added alongside the catalyst at a ratio of 1/5 barrel of catalyst added to the reactor.
019
Hero
"Behold a marvel of design—an egg-shaped tent structure that emanates an ethereal glow, inviting you into its enchanting realm. Crafted from a lightweight aluminum framework, this innovative structure features flexible rods that bend and contour effortlessly. The framework forms a circular base and a smaller circle at the top, seamlessly connected by vertical rods that resemble the ribs of an egg. The entire ovoid structure is cloaked in a resilient fabric, specifically chosen for its suitability in tent and canopy construction. The fabric elegantly envelopes the entire surface of the egg-shaped tent, accentuating the seamless and organic form of the structure. Not a single curve or contour is left untouched, as the fabric adheres flawlessly to every edge and fold. The fabric embraces the tent with a gentle embrace, creating an alluring presence that emphasizes its resemblance to a magnificent hatching egg. Step through the grand entrance, and you will discover a world of tranquility and wonder. Inside, there is only emptiness, illuminated by a soft, ambient light that bathes the interior with a serene glow. The absence of physical objects accentuates the sense of spaciousness and invites a deep sense of introspection. The space becomes a sanctuary for personal reflection and connection with oneself. As you gaze upon this remarkable structure, it seamlessly integrates with the natural surroundings, becoming a harmonious element of the landscape. The fabric-covered egg-shaped tent stands as a testament to human ingenuity, offering a captivating and immersive experience. Its exterior showcases the gentle glow that emanates from within, captivating all who behold its beauty. The size of the tent, with its complete coverage and ovoid structure, is designed for a single occupant, providing an intimate and personal space for solace and reflection. The lightweight aluminum framework, meticulously designed, forms a circular base and a smaller circle at the top, with vertical rods extending from the upper ring to the lower one, connecting them to shape the rib-like structure of the egg. Step through the open entrance, and you will enter a sanctuary of serenity, where the only companions are the soft glow and the empty expanse. Allow the encompassing light and the tranquil haven to embrace you, as you embark on a journey of introspection and connection within the allure of this egg-shaped tent."
0117
DreamShaper
"Behold a marvel of design—an egg-shaped tent structure that emanates an ethereal glow, inviting you into its enchanting realm. Crafted from a lightweight aluminum framework, this innovative structure features flexible rods that bend and contour effortlessly. The framework forms a circular base and a smaller circle at the top, seamlessly connected by vertical rods that resemble the ribs of an egg. The entire ovoid structure is cloaked in a resilient fabric, specifically chosen for its suitability in tent and canopy construction. The fabric elegantly envelopes the entire surface of the egg-shaped tent, accentuating the seamless and organic form of the structure. Not a single curve or contour is left untouched, as the fabric adheres flawlessly to every edge and fold. The fabric embraces the tent with a gentle embrace, creating an alluring presence that emphasizes its resemblance to a magnificent hatching egg. Step through the grand entrance, and you will discover a world of tranquility and wonder. Inside, there is only emptiness, illuminated by a soft, ambient light that bathes the interior with a serene glow. The absence of physical objects accentuates the sense of spaciousness and invites a deep sense of introspection. The space becomes a sanctuary for personal reflection and connection with oneself. As you gaze upon this remarkable structure, it seamlessly integrates with the natural surroundings, becoming a harmonious element of the landscape. The fabric-covered egg-shaped tent stands as a testament to human ingenuity, offering a captivating and immersive experience. Its exterior showcases the gentle glow that emanates from within, captivating all who behold its beauty. The size of the tent, with its complete coverage and ovoid structure, is designed for a single occupant, providing an intimate and personal space for solace and reflection. The lightweight aluminum framework, meticulously designed, forms a circular base and a smaller circle at the top, with vertical rods extending from the upper ring to the lower one, connecting them to shape the rib-like structure of the egg. Step through the open entrance, and you will enter a sanctuary of serenity, where the only companions are the soft glow and the empty expanse. Allow the encompassing light and the tranquil haven to embrace you, as you embark on a journey of introspection and connection within the allure of this egg-shaped tent."
095
DreamShaper
generate this business card: Layout 1: Modern Minimalist Colors: Primarily Atlantic Blue and Aluminum Snow. Layout:Left Side: Professional headshot in a circular or square frame. Right Side:Company Name: "SAFETY COMPLIANCE PROS" in bold, sans-serif font. Personal Name in a slightly smaller, sans-serif font. Contact information icons aligned vertically:Email icon Phone icon Location icon Geometric Corner Shape: A subtle, minimalist geometric shape in Aluminum Snow, placed at the top right corner of the card.
057
FLUX
A massive sheet of aluminum, very thin, wide, and long, is being compressed between two large industrial metal rollers. The rollers apply intense pressure, slightly deforming the sheet to make it perfectly flat. The setting is a modern metal processing factory, with light reflections on the shiny aluminum and detailed mechanical features on the rollers. The scene is shown from a slightly angled side perspective, with industrial lighting.
050
FLUX
Specialized Bitumen Refining Plant Governorate: Anbar / Hit District Production Capacity: ( ) Tons/Day The city of Hit in the Anbar Governorate is considered one of the most famous areas in the world for its natural "bitumen springs," which have been used for thousands of years (dating back to the Babylonian and Assyrian eras). However, processing this bitumen for modern use requires technical steps to transform it from a raw material into a viable product for construction or industrial applications. Bitumen emerges from these springs as a highly viscous liquid mixed with sulfurous water, salts, and mud impurities. This "Natural Asphalt" differs from petroleum bitumen produced in refineries, and it can also appear in the form of rocky or spongy blocks mixed with mud. To obtain industrially usable products from this bitumen, specifically for: 1. Waterproofing (Felt/Membranes): Considered one of the best coating materials for building foundations to prevent moisture leakage due to its high resistance to hydrolysis. 2. Road Paving: Mixed with gravel and sand to produce asphalt concrete. It is characterized by exceptionally high cohesive strength compared to industrial bitumen. The natural bitumen from these springs must undergo several fundamental processing stages to become industrially viable: 1. Collection and Sedimentation: Bitumen is collected from the springs or quarry sites and left in designated basins to allow the sulfurous water to naturally separate (due to density differences). 2. Primary Heating: The raw bitumen is placed in large boilers to: a. Evaporate the remaining water. b. Reduce viscosity for easier handling. 3. Filtration and Purification: The heated bitumen is screened to remove solid impurities such as gravel, dirt, and suspended organic matter. 4. Secondary Heating and Cooking: The temperature of the bitumen is raised, improving agents are added, and it is prepared for the vacuum distillation process. 5. Vacuum Distillation: The distillation process is conducted under low pressure (vacuum pressure), which allows for: a. The separation of light oils and volatile substances at lower temperatures. b. The production of highly pure "Hard Asphalt," which is highly demanded in the construction industry. ________________________________________ Plant Components and Operational Stages The specialized bitumen plant for processing raw natural bitumen (in both liquid and solid states) consists of a range of specialized equipment designed according to the latest international standards. This equipment aligns with the technical and engineering requirements for bitumen products, complies with Iraqi standard specifications, and adheres to environmental considerations in the Anbar Governorate. 1. Extraction Stage The raw material (solid or liquid) is extracted from quarries designated by the Geological Survey Authority using specialized mechanical equipment. It is stored in stocks or special basins for solid materials, then transported to the refinery site using specialized transport vehicles of various capacities. 2. Storage Stage The raw materials are stored in designated yards to ensure a sufficient inventory for continuous, uninterrupted production for no less than 7 working days. 3. Raw Material Preparation and Primary Heating Stage Raw materials are fed into the plant via hydraulic lifts. This stage includes: • 3-1: Crushing and Digestion: Solid raw materials from the quarries are broken down and digested using a digester (SH-01) equipped with double blades driven by hydraulic motors (22.5 kW capacity). The digester is 5 meters long and 1.80 meters in diameter, made of carbon steel, with Stainless Steel 304 blades. It includes a Stainless Steel piston driven by a 7.5 kW electric motor. • 3-2: Primary Heating: This melts the bitumen and improves pumpability through pipes and pumps. • 3-3: Efficiency Enhancement: To increase melting efficiency, Gas Oil is added to the primary heating basin at a ratio of 1:5 per ton of solid raw material entering the basin (this ratio decreases when using liquid raw bitumen). o 3-2-1: Primary Melting Basin (TK-01): Raw material is heated in a concrete tank (25m L x 5m W x 3m H) with a maximum storage capacity of 300 tons. Heating pipes circulate thermal fluid (oil) at 125°C, with a retention time of 4-6 hours. The tank is internally lined with 6-8 mm carbon steel plates to protect the heating pipes from corrosion. It contains 8 Stainless Steel 304 mixers (MX-01 A/B/C/D/E/F) driven by 7.5 kW electric motors (50 RPM) and gearboxes (1:60 ratio) to mix the material, increase heating efficiency, reduce retention time, and circulate the melted bitumen to eliminate dissolved water, resulting in a homogeneous melt. Covered with a carbon steel roof with service hatches, it connects to an air duct (30x60 cm) linked to 2 air blowers (AB-01A/B) (one operating, one standby) at 22.5 kW / 1500 RPM. These extract water vapor and sulfur fumes, sending them to a scrubber before atmospheric release and water recycling. o 3-2-2: Primary Collection Tank (V-01): A carbon steel tank (12-14 mm thick) with a maximum capacity of 125 tons (10m L x 5m W x 3m H). It connects directly to the primary tank (TK-01) via channels and movable gates to receive only liquid raw material. It contains thermal oil pipes to maintain the liquid raw material at 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum outer cover. Impurities larger than 35 mm are removed and collected in a waste tank. o 3-2-3: Screw Conveyors (SC-01 A/B): Carbon steel screw conveyors with a double-jacketed outer cover filled with thermal oil to maintain the 140°C temperature. Driven by 22.5 kW electric motors (3000 RPM) with 1:40 gearboxes, they transport the liquid raw material to the preliminary filtration unit. 4. Purification Unit Removes suspended impurities from the liquid raw material in two stages: • 4-1: Preliminary Purification Tank (V-02): A carbon steel tank (12-14 mm thick, 125-ton capacity, 5m L x 10m W x 3m H). Receives liquid raw material from the primary collection tank. Contains thermal oil pipes to maintain 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Impurities larger than 15 mm are removed to a waste tank. Material is pumped to the final filtration stage via gear pumps (GP-01 A/B) (one operating, one standby) at 22.5 kW / 1000 RPM. • 4-2: Final Filtration Unit (FT-01): Removes remaining impurities by passing liquids through box filters arranged in 2 trains (8 per train). They feature a two-layer Stainless Steel filter mesh (specified microns) wrapped around square boxes. Liquid enters from the outside, and pure liquid is collected from the inside via a pipe network connected to a manifold. This is driven by two vacuum pumps (VP-01A/B) connected to the raw material tanks. 5. Raw Material Tanks (V-03 A-J) Ten carbon steel tanks (2.5m diameter, 9m length, 14 mm thickness, 45-ton max capacity) equipped with thermal oil heating coils. They receive, store, and prepare the purified raw material for the subsequent cooking reaction. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Connected by a pipe/valve network, the material is pumped via two centrifugal pumps (P-01 A/B) at 22.5 kW / 3000 RPM to the reactor unit. The tanks connect to a pipe network driven by vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM, pushing heating gases and vapors to the gas washing tank (V-14). 6. Reactor (Cooking) Unit (V-04 A/B) Consists of three reactors (55 tons each) that prepare the raw material for vacuum distillation and extract light naphtha compounds. • 6-1: Cooking Process: o 6-1-1: Catalyst System: Consists of two tanks. One prepares the catalyst mixture (1.5m dia, 4m H, 8mm carbon steel) with a mixer (MX-03) driven by a hydromotor and 1:40 gearbox. The second stores Gas Oil added to the preparation unit (1.5m dia, 1m H, 5mm carbon steel) with a 0.5 HP centrifugal pump. o 6-1-2: Reaction Tanks (V-04/05/06A): Three carbon steel tanks (2.8m dia, 9m L, 14mm thick, 55-ton max). Each has 2 Stainless Steel mixers (MX-02 A/B/C/D/E/F) driven by a 7.5 kW motor (1500 RPM) with a 1:40 gearbox. Contains an internal heating system powered by a Gas Oil burner to raise the temperature to 180°C. Catalyst is injected via dosing pumps (DP-01A/B) to increase naphtha extraction efficiency. Material is circulated during cooking by two centrifugal pumps per reactor (P-04A/B/C/D/E/F) (one active, one standby) to reduce retention time to 3-4 hours. After cooking, material is moved to the attached tank (V-04/05/06B) for storage before distillation. Fully insulated. o 6-1-3: Cooked Material Tank (V-04/05/06B): Carbon steel tank (2.8m dia, 9m L, 14mm thick) with thermal oil pipes to maintain 190-200°C. Fully insulated. Material is pumped to the vacuum distillation tower via centrifugal pumps (P-05A/B) (one active, one standby) at 22.5 kW / 3000 RPM. 7. Raw Naphtha Storage Unit Collects and condenses naphtha extracted during cooking. • 7-1-1: Raw Naphtha Tanks (V-07A/B/C): Three vertical Stainless Steel 304 tanks (1.5m dia, 5m H) connected to three heat exchangers and two pump pairs. Equipped internally with water spray nozzles on a ring pipe to wash non-condensable gases. • 7-1-2: Heat Exchangers (HE-01A/B/C): Condense naphtha vapors from 140°C down to 40°C using water from the cooling tower. Connected in series. Shell & Tube type, carbon steel (510 mm dia, 6m L) with 70 tubes (0.75-inch dia) in two rows of 35. Includes internal baffles for efficiency. • 7-1-3: Supporting Pumps: Vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM draw naphtha vapors from reactors to the heat exchangers, pushing non-condensable gases to the scrubber (V-14). Centrifugal pumps (P-02A/B) at 11.5 kW / 1500 RPM transport liquid raw naphtha to the Bleaching Unit. 8. Vacuum Distillation Unit The core of the plant, separating remaining light compounds and producing hard asphalt. • 8-1-1: Vacuum Distillation Tower: A vertical tower (~16m total height, 14mm carbon steel). Bottom section (Reboiler) is 3.5m dia x 1.2m H; top section is 1.5m dia x 12m H. Fully insulated. Fed with cooked material at 190-200°C via pumps (P-05A/B). To start extraction (remaining naphtha, Gas Oil, diesel), temperature is raised to 240-250°C using Heating Coil 1 via pumps (P-08A/B) at 55 kW / 3000 RPM, with continuous circulation via pumps (P-07A/B). Vacuum pumps (VP-03A/B) maintain 0.3-0.5 mbar pressure. Light compounds are extracted, condensed (HE-02A/B/C), and stored (V-08/09/10 A/B) over 2.5-3 hours. Afterward, material is heated via Heating Coil 2 to 320-340°C to finalize extraction and produce hard bitumen. Product is extracted via pumps (P-07A/B) at ~320°C, cooled via cooling tower coils, and sent to final tanks (V-18A/B/C). Batch processing takes 6-7 hours daily; continuous operation is possible. • 8-1-2: Supporting Pumps: Vacuum pumps (VP-03A/B) at 5.5 kW / 3000 RPM draw light vapors for condensation. Circulation centrifugal pumps (P-08A/B) at 55 kW move hot material to heating coils; (P-07A/B) circulate material and pump final bitumen product. • 8-1-3: Heating Coils 1 & 2: Carbon steel 4-inch diameter coils heated externally by a Gas Oil burner. Connected in series to heat liquid bitumen in two stages to prevent degradation. • 8-2: Heat Exchangers (HE-02A/B/C): Condense light compound vapors from 240°C to 40°C. Shell & Tube type, carbon steel (600 mm dia, 6m L) with 80 tubes (1-inch dia) in two rows of 40, equipped with baffles. • 8-3: Light Compound Tanks (V-08A/B, V-09A/B, V-10A/B): Six horizontal carbon steel tanks (1.5m dia, 4.5m L, 14mm thick). Receive condensates, linked to heat exchangers and vacuum pumps. Liquids are pumped to the Bleaching Unit via centrifugal pumps (P-06A/B) at 7.5 kW / 1500 RPM. 9. Bleaching Unit Improves the specifications of raw light compounds for local use and marketing. • 9-1: Collection Tank (V-11): Horizontal carbon steel tank (1m dia, 2.5m L, 14mm thick) placed above the system to store and distribute light compounds to the bleaching columns. • 9-2: Bleaching Columns (V-12A/B/C): Three vertical carbon steel vessels (1m dia, 4.5m H, 14mm thick). Contain a 15 cm catalyst layer on trays to bleach raw liquids into high-quality compounds, collected in a bottom horizontal tank. The catalyst is a calcined mixture of Bentonite and Zinc Oxide granules (2-3 mm) homogenized in water, which can be reactivated with steam and 5% HCl. • 9-3: Supporting Pumps: Vacuum pumps (VP-04A/B) at 5.5 kW extract vapors to the scrubber. Centrifugal pumps (P-09A/B) at 7.5 kW push bleached liquids to final tanks. 10. Production Tanks (V-13 A-F & V-18 A-C) • Light Products: Six horizontal carbon steel tanks (2.8m dia, 9m L, 55-ton capacity). V-13A/B for light naphtha, V-13C/D for Gas Oil, V-13E/F for diesel. • Asphalt: Three vertical carbon steel tanks (V-18A/B/C) (5m dia, 9m H). Equipped with thermal oil heating coils to keep asphalt liquid. Fully insulated (90 kg/m³ glass wool, 1.8mm aluminum cover). 11. Supporting Systems • 11-1: Gas Washing (Scrubber) System: Treats non-condensable gases before atmospheric release. Contains V-14 washing tank (1m dia, 2.8m L), a 500mm Flare stack with 3 ignitors, and a 1m x 1m LPG tank (V-15) for ignition. • 11-2: Cooling Tower: Provides cooling water for heat exchangers. Galvanized pressed steel basin (16m L x 2.4m W x 2.8m H), FRP casing, top fans, water distributors, and fill media. Includes Accumulator tank V-20 (1.5m dia, 2m L) and 11 kW pushing pumps (P-14A/B). • 11-3: Thermal Oil Boilers: Includes oil tank, heating boiler, oil pumps, and heating accelerators. • 11-4: Distillation Tower Raw Boilers • 11-5: Power Generation System • 11-6: Production Laboratory • 11-7: Control and Operation Room • 11-8: Catalyst System: Contains a vertical diesel tank (1m dia, 1.5m H) with a 1 kW centrifugal pump (P-11). Two vertical carbon steel tanks (V-17A/B, 1.5m dia, 4.5m H) with an MX-03 hydromotor mixer (7.5 kW, 30 RPM). V-17A is for preparation, V-17B pumps catalyst to the reactor. ________________________________________ Catalyst Chemical Components & Formulations 1. Alumina (Al2O3): Enhances the cracking of chemical bonds in heavy bitumen chains and increases Gas Oil extraction yield. 2. Manganese Dioxide (MnO2): Accelerates the reaction, reduces reaction time, and acts as a gasoline improver. 3. Silicon Dioxide (SiO2): Increases acceleration and reduces reaction time. 4. Iron Oxides (Fe2O): Accelerates the reaction, prevents pipe corrosion, and stops sulfur and wax from sticking to pipes and pumps. Weight Ratios (WT/WT) to Produce One Barrel (200 Liters) of Catalyst: 1. Alumina: Varies by feed: 2-2.5% for Bitumen / 4-5% for Vacuum Residue (VR) / 2-2.5% for Heavy Fuel Oil (HFO). To increase Gas Oil/Diesel (Light fuel) yield, Alumina can be added up to a maximum of 10%. 2. Manganese Dioxide: 2-2.5% for HFO / 4-5% for VR and Bitumen. 3. Iron Oxides: 2-2.5% across all feeds. 4. Silicon Dioxide: 2-2.5% for HFO / 4-5% for Bitumen and VR. 5. Remaining Volume: Filled with C-oil. Note: One barrel (200 Liters) of this mixture is added for every 5 tons of HFO, VR, or Bitumen. Manufacturing Mechanism: All components are placed in a tank, initially mixed with water, and heated to 80-120°C with continuous mixing (20-30 RPM). Once foam is generated, the product is allowed to cool to 80°C. The heating process up to 120°C is repeated 3 or 4 times until foaming ceases. Finally, the temperature is raised to 150°C, and the mixture is topped off to 200 liters using C-oil. To further improve light compound specifications, Zinc Oxide (300 grams) is mixed with 20 kg of Bentonite in C-oil. This is added alongside the catalyst at a ratio of 1/5 barrel of catalyst added to the reactor.
010
Hero
generate this business card: Layout 1: Modern Minimalist Colors: Primarily Atlantic Blue and Aluminum Snow. Layout:Left Side: Professional headshot in a circular or square frame. Right Side:Company Name: "SAFETY COMPLIANCE PROS" in bold, sans-serif font. Personal Name in a slightly smaller, sans-serif font. Contact information icons aligned vertically:Email icon Phone icon Location icon Geometric Corner Shape: A subtle, minimalist geometric shape in Aluminum Snow, placed at the top right corner of the card.
057
FLUX
A massive sheet of aluminum, very thin, wide, and long, is being compressed between two large industrial metal rollers. The rollers apply intense pressure, slightly deforming the sheet to make it perfectly flat. The setting is a modern metal processing factory, with light reflections on the shiny aluminum and detailed mechanical features on the rollers. The scene is shown from a slightly angled side perspective, with industrial lighting.
027
FLUX
"Behold a marvel of design—an egg-shaped tent structure that emanates an ethereal glow, inviting you into its enchanting realm. Crafted from a lightweight aluminum framework, this innovative structure features flexible rods that bend and contour effortlessly. The framework forms a circular base and a smaller circle at the top, seamlessly connected by vertical rods that resemble the ribs of an egg. The entire ovoid structure is cloaked in a resilient fabric, specifically chosen for its suitability in tent and canopy construction. The fabric elegantly envelopes the entire surface of the egg-shaped tent, accentuating the seamless and organic form of the structure. Not a single curve or contour is left untouched, as the fabric adheres flawlessly to every edge and fold. The fabric embraces the tent with a gentle embrace, creating an alluring presence that emphasizes its resemblance to a magnificent hatching egg. Step through the grand entrance, and you will discover a world of tranquility and wonder. Inside, there is only emptiness, illuminated by a soft, ambient light that bathes the interior with a serene glow. The absence of physical objects accentuates the sense of spaciousness and invites a deep sense of introspection. The space becomes a sanctuary for personal reflection and connection with oneself. As you gaze upon this remarkable structure, it seamlessly integrates with the natural surroundings, becoming a harmonious element of the landscape. The fabric-covered egg-shaped tent stands as a testament to human ingenuity, offering a captivating and immersive experience. Its exterior showcases the gentle glow that emanates from within, captivating all who behold its beauty. The size of the tent, with its complete coverage and ovoid structure, is designed for a single occupant, providing an intimate and personal space for solace and reflection. The lightweight aluminum framework, meticulously designed, forms a circular base and a smaller circle at the top, with vertical rods extending from the upper ring to the lower one, connecting them to shape the rib-like structure of the egg. Step through the open entrance, and you will enter a sanctuary of serenity, where the only companions are the soft glow and the empty expanse. Allow the encompassing light and the tranquil haven to embrace you, as you embark on a journey of introspection and connection within the allure of this egg-shaped tent."
0104
DreamShaper
"Behold a marvel of design—an egg-shaped tent structure that emanates an ethereal glow, inviting you into its enchanting realm. Crafted from a lightweight aluminum framework, this innovative structure features flexible rods that bend and contour effortlessly. The framework forms a circular base and a smaller circle at the top, seamlessly connected by vertical rods that resemble the ribs of an egg. The entire ovoid structure is cloaked in a resilient fabric, specifically chosen for its suitability in tent and canopy construction. The fabric elegantly envelopes the entire surface of the egg-shaped tent, accentuating the seamless and organic form of the structure. Not a single curve or contour is left untouched, as the fabric adheres flawlessly to every edge and fold. The fabric embraces the tent with a gentle embrace, creating an alluring presence that emphasizes its resemblance to a magnificent hatching egg. Step through the grand entrance, and you will discover a world of tranquility and wonder. Inside, there is only emptiness, illuminated by a soft, ambient light that bathes the interior with a serene glow. The absence of physical objects accentuates the sense of spaciousness and invites a deep sense of introspection. The space becomes a sanctuary for personal reflection and connection with oneself. As you gaze upon this remarkable structure, it seamlessly integrates with the natural surroundings, becoming a harmonious element of the landscape. The fabric-covered egg-shaped tent stands as a testament to human ingenuity, offering a captivating and immersive experience. Its exterior showcases the gentle glow that emanates from within, captivating all who behold its beauty. The size of the tent, with its complete coverage and ovoid structure, is designed for a single occupant, providing an intimate and personal space for solace and reflection. The lightweight aluminum framework, meticulously designed, forms a circular base and a smaller circle at the top, with vertical rods extending from the upper ring to the lower one, connecting them to shape the rib-like structure of the egg. Step through the open entrance, and you will enter a sanctuary of serenity, where the only companions are the soft glow and the empty expanse. Allow the encompassing light and the tranquil haven to embrace you, as you embark on a journey of introspection and connection within the allure of this egg-shaped tent."
1127
DreamShaper
"Behold a marvel of design—an egg-shaped tent structure that emanates an ethereal glow, inviting you into its enchanting realm. Crafted from a lightweight aluminum framework, this innovative structure features flexible rods that bend and contour effortlessly. The framework forms a circular base and a smaller circle at the top, seamlessly connected by vertical rods that resemble the ribs of an egg. The entire ovoid structure is cloaked in a resilient fabric, specifically chosen for its suitability in tent and canopy construction. The fabric elegantly envelopes the entire surface of the egg-shaped tent, accentuating the seamless and organic form of the structure. Not a single curve or contour is left untouched, as the fabric adheres flawlessly to every edge and fold. The fabric embraces the tent with a gentle embrace, creating an alluring presence that emphasizes its resemblance to a magnificent hatching egg. Step through the grand entrance, and you will discover a world of tranquility and wonder. Inside, there is only emptiness, illuminated by a soft, ambient light that bathes the interior with a serene glow. The absence of physical objects accentuates the sense of spaciousness and invites a deep sense of introspection. The space becomes a sanctuary for personal reflection and connection with oneself. As you gaze upon this remarkable structure, it seamlessly integrates with the natural surroundings, becoming a harmonious element of the landscape. The fabric-covered egg-shaped tent stands as a testament to human ingenuity, offering a captivating and immersive experience. Its exterior showcases the gentle glow that emanates from within, captivating all who behold its beauty. The size of the tent, with its complete coverage and ovoid structure, is designed for a single occupant, providing an intimate and personal space for solace and reflection. The lightweight aluminum framework, meticulously designed, forms a circular base and a smaller circle at the top, with vertical rods extending from the upper ring to the lower one, connecting them to shape the rib-like structure of the egg. Step through the open entrance, and you will enter a sanctuary of serenity, where the only companions are the soft glow and the empty expanse. Allow the encompassing light and the tranquil haven to embrace you, as you embark on a journey of introspection and connection within the allure of this egg-shaped tent."
0117
DreamShaper
"Behold a marvel of design—an egg-shaped tent structure that emanates an ethereal glow, inviting you into its enchanting realm. Crafted from a lightweight aluminum framework, this innovative structure features flexible rods that bend and contour effortlessly. The framework forms a circular base and a smaller circle at the top, seamlessly connected by vertical rods that resemble the ribs of an egg. The entire ovoid structure is cloaked in a resilient fabric, specifically chosen for its suitability in tent and canopy construction. The fabric elegantly envelopes the entire surface of the egg-shaped tent, accentuating the seamless and organic form of the structure. Not a single curve or contour is left untouched, as the fabric adheres flawlessly to every edge and fold. The fabric embraces the tent with a gentle embrace, creating an alluring presence that emphasizes its resemblance to a magnificent hatching egg. Step through the grand entrance, and you will discover a world of tranquility and wonder. Inside, there is only emptiness, illuminated by a soft, ambient light that bathes the interior with a serene glow. The absence of physical objects accentuates the sense of spaciousness and invites a deep sense of introspection. The space becomes a sanctuary for personal reflection and connection with oneself. As you gaze upon this remarkable structure, it seamlessly integrates with the natural surroundings, becoming a harmonious element of the landscape. The fabric-covered egg-shaped tent stands as a testament to human ingenuity, offering a captivating and immersive experience. Its exterior showcases the gentle glow that emanates from within, captivating all who behold its beauty. The size of the tent, with its complete coverage and ovoid structure, is designed for a single occupant, providing an intimate and personal space for solace and reflection. The lightweight aluminum framework, meticulously designed, forms a circular base and a smaller circle at the top, with vertical rods extending from the upper ring to the lower one, connecting them to shape the rib-like structure of the egg. Step through the open entrance, and you will enter a sanctuary of serenity, where the only companions are the soft glow and the empty expanse. Allow the encompassing light and the tranquil haven to embrace you, as you embark on a journey of introspection and connection within the allure of this egg-shaped tent."
089
DreamShaper
Specialized Bitumen Refining Plant Governorate: Anbar / Hit District Production Capacity: ( ) Tons/Day The city of Hit in the Anbar Governorate is considered one of the most famous areas in the world for its natural "bitumen springs," which have been used for thousands of years (dating back to the Babylonian and Assyrian eras). However, processing this bitumen for modern use requires technical steps to transform it from a raw material into a viable product for construction or industrial applications. Bitumen emerges from these springs as a highly viscous liquid mixed with sulfurous water, salts, and mud impurities. This "Natural Asphalt" differs from petroleum bitumen produced in refineries, and it can also appear in the form of rocky or spongy blocks mixed with mud. To obtain industrially usable products from this bitumen, specifically for: 1. Waterproofing (Felt/Membranes): Considered one of the best coating materials for building foundations to prevent moisture leakage due to its high resistance to hydrolysis. 2. Road Paving: Mixed with gravel and sand to produce asphalt concrete. It is characterized by exceptionally high cohesive strength compared to industrial bitumen. The natural bitumen from these springs must undergo several fundamental processing stages to become industrially viable: 1. Collection and Sedimentation: Bitumen is collected from the springs or quarry sites and left in designated basins to allow the sulfurous water to naturally separate (due to density differences). 2. Primary Heating: The raw bitumen is placed in large boilers to: a. Evaporate the remaining water. b. Reduce viscosity for easier handling. 3. Filtration and Purification: The heated bitumen is screened to remove solid impurities such as gravel, dirt, and suspended organic matter. 4. Secondary Heating and Cooking: The temperature of the bitumen is raised, improving agents are added, and it is prepared for the vacuum distillation process. 5. Vacuum Distillation: The distillation process is conducted under low pressure (vacuum pressure), which allows for: a. The separation of light oils and volatile substances at lower temperatures. b. The production of highly pure "Hard Asphalt," which is highly demanded in the construction industry. ________________________________________ Plant Components and Operational Stages The specialized bitumen plant for processing raw natural bitumen (in both liquid and solid states) consists of a range of specialized equipment designed according to the latest international standards. This equipment aligns with the technical and engineering requirements for bitumen products, complies with Iraqi standard specifications, and adheres to environmental considerations in the Anbar Governorate. 1. Extraction Stage The raw material (solid or liquid) is extracted from quarries designated by the Geological Survey Authority using specialized mechanical equipment. It is stored in stocks or special basins for solid materials, then transported to the refinery site using specialized transport vehicles of various capacities. 2. Storage Stage The raw materials are stored in designated yards to ensure a sufficient inventory for continuous, uninterrupted production for no less than 7 working days. 3. Raw Material Preparation and Primary Heating Stage Raw materials are fed into the plant via hydraulic lifts. This stage includes: • 3-1: Crushing and Digestion: Solid raw materials from the quarries are broken down and digested using a digester (SH-01) equipped with double blades driven by hydraulic motors (22.5 kW capacity). The digester is 5 meters long and 1.80 meters in diameter, made of carbon steel, with Stainless Steel 304 blades. It includes a Stainless Steel piston driven by a 7.5 kW electric motor. • 3-2: Primary Heating: This melts the bitumen and improves pumpability through pipes and pumps. • 3-3: Efficiency Enhancement: To increase melting efficiency, Gas Oil is added to the primary heating basin at a ratio of 1:5 per ton of solid raw material entering the basin (this ratio decreases when using liquid raw bitumen). o 3-2-1: Primary Melting Basin (TK-01): Raw material is heated in a concrete tank (25m L x 5m W x 3m H) with a maximum storage capacity of 300 tons. Heating pipes circulate thermal fluid (oil) at 125°C, with a retention time of 4-6 hours. The tank is internally lined with 6-8 mm carbon steel plates to protect the heating pipes from corrosion. It contains 8 Stainless Steel 304 mixers (MX-01 A/B/C/D/E/F) driven by 7.5 kW electric motors (50 RPM) and gearboxes (1:60 ratio) to mix the material, increase heating efficiency, reduce retention time, and circulate the melted bitumen to eliminate dissolved water, resulting in a homogeneous melt. Covered with a carbon steel roof with service hatches, it connects to an air duct (30x60 cm) linked to 2 air blowers (AB-01A/B) (one operating, one standby) at 22.5 kW / 1500 RPM. These extract water vapor and sulfur fumes, sending them to a scrubber before atmospheric release and water recycling. o 3-2-2: Primary Collection Tank (V-01): A carbon steel tank (12-14 mm thick) with a maximum capacity of 125 tons (10m L x 5m W x 3m H). It connects directly to the primary tank (TK-01) via channels and movable gates to receive only liquid raw material. It contains thermal oil pipes to maintain the liquid raw material at 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum outer cover. Impurities larger than 35 mm are removed and collected in a waste tank. o 3-2-3: Screw Conveyors (SC-01 A/B): Carbon steel screw conveyors with a double-jacketed outer cover filled with thermal oil to maintain the 140°C temperature. Driven by 22.5 kW electric motors (3000 RPM) with 1:40 gearboxes, they transport the liquid raw material to the preliminary filtration unit. 4. Purification Unit Removes suspended impurities from the liquid raw material in two stages: • 4-1: Preliminary Purification Tank (V-02): A carbon steel tank (12-14 mm thick, 125-ton capacity, 5m L x 10m W x 3m H). Receives liquid raw material from the primary collection tank. Contains thermal oil pipes to maintain 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Impurities larger than 15 mm are removed to a waste tank. Material is pumped to the final filtration stage via gear pumps (GP-01 A/B) (one operating, one standby) at 22.5 kW / 1000 RPM. • 4-2: Final Filtration Unit (FT-01): Removes remaining impurities by passing liquids through box filters arranged in 2 trains (8 per train). They feature a two-layer Stainless Steel filter mesh (specified microns) wrapped around square boxes. Liquid enters from the outside, and pure liquid is collected from the inside via a pipe network connected to a manifold. This is driven by two vacuum pumps (VP-01A/B) connected to the raw material tanks. 5. Raw Material Tanks (V-03 A-J) Ten carbon steel tanks (2.5m diameter, 9m length, 14 mm thickness, 45-ton max capacity) equipped with thermal oil heating coils. They receive, store, and prepare the purified raw material for the subsequent cooking reaction. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Connected by a pipe/valve network, the material is pumped via two centrifugal pumps (P-01 A/B) at 22.5 kW / 3000 RPM to the reactor unit. The tanks connect to a pipe network driven by vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM, pushing heating gases and vapors to the gas washing tank (V-14). 6. Reactor (Cooking) Unit (V-04 A/B) Consists of three reactors (55 tons each) that prepare the raw material for vacuum distillation and extract light naphtha compounds. • 6-1: Cooking Process: o 6-1-1: Catalyst System: Consists of two tanks. One prepares the catalyst mixture (1.5m dia, 4m H, 8mm carbon steel) with a mixer (MX-03) driven by a hydromotor and 1:40 gearbox. The second stores Gas Oil added to the preparation unit (1.5m dia, 1m H, 5mm carbon steel) with a 0.5 HP centrifugal pump. o 6-1-2: Reaction Tanks (V-04/05/06A): Three carbon steel tanks (2.8m dia, 9m L, 14mm thick, 55-ton max). Each has 2 Stainless Steel mixers (MX-02 A/B/C/D/E/F) driven by a 7.5 kW motor (1500 RPM) with a 1:40 gearbox. Contains an internal heating system powered by a Gas Oil burner to raise the temperature to 180°C. Catalyst is injected via dosing pumps (DP-01A/B) to increase naphtha extraction efficiency. Material is circulated during cooking by two centrifugal pumps per reactor (P-04A/B/C/D/E/F) (one active, one standby) to reduce retention time to 3-4 hours. After cooking, material is moved to the attached tank (V-04/05/06B) for storage before distillation. Fully insulated. o 6-1-3: Cooked Material Tank (V-04/05/06B): Carbon steel tank (2.8m dia, 9m L, 14mm thick) with thermal oil pipes to maintain 190-200°C. Fully insulated. Material is pumped to the vacuum distillation tower via centrifugal pumps (P-05A/B) (one active, one standby) at 22.5 kW / 3000 RPM. 7. Raw Naphtha Storage Unit Collects and condenses naphtha extracted during cooking. • 7-1-1: Raw Naphtha Tanks (V-07A/B/C): Three vertical Stainless Steel 304 tanks (1.5m dia, 5m H) connected to three heat exchangers and two pump pairs. Equipped internally with water spray nozzles on a ring pipe to wash non-condensable gases. • 7-1-2: Heat Exchangers (HE-01A/B/C): Condense naphtha vapors from 140°C down to 40°C using water from the cooling tower. Connected in series. Shell & Tube type, carbon steel (510 mm dia, 6m L) with 70 tubes (0.75-inch dia) in two rows of 35. Includes internal baffles for efficiency. • 7-1-3: Supporting Pumps: Vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM draw naphtha vapors from reactors to the heat exchangers, pushing non-condensable gases to the scrubber (V-14). Centrifugal pumps (P-02A/B) at 11.5 kW / 1500 RPM transport liquid raw naphtha to the Bleaching Unit. 8. Vacuum Distillation Unit The core of the plant, separating remaining light compounds and producing hard asphalt. • 8-1-1: Vacuum Distillation Tower: A vertical tower (~16m total height, 14mm carbon steel). Bottom section (Reboiler) is 3.5m dia x 1.2m H; top section is 1.5m dia x 12m H. Fully insulated. Fed with cooked material at 190-200°C via pumps (P-05A/B). To start extraction (remaining naphtha, Gas Oil, diesel), temperature is raised to 240-250°C using Heating Coil 1 via pumps (P-08A/B) at 55 kW / 3000 RPM, with continuous circulation via pumps (P-07A/B). Vacuum pumps (VP-03A/B) maintain 0.3-0.5 mbar pressure. Light compounds are extracted, condensed (HE-02A/B/C), and stored (V-08/09/10 A/B) over 2.5-3 hours. Afterward, material is heated via Heating Coil 2 to 320-340°C to finalize extraction and produce hard bitumen. Product is extracted via pumps (P-07A/B) at ~320°C, cooled via cooling tower coils, and sent to final tanks (V-18A/B/C). Batch processing takes 6-7 hours daily; continuous operation is possible. • 8-1-2: Supporting Pumps: Vacuum pumps (VP-03A/B) at 5.5 kW / 3000 RPM draw light vapors for condensation. Circulation centrifugal pumps (P-08A/B) at 55 kW move hot material to heating coils; (P-07A/B) circulate material and pump final bitumen product. • 8-1-3: Heating Coils 1 & 2: Carbon steel 4-inch diameter coils heated externally by a Gas Oil burner. Connected in series to heat liquid bitumen in two stages to prevent degradation. • 8-2: Heat Exchangers (HE-02A/B/C): Condense light compound vapors from 240°C to 40°C. Shell & Tube type, carbon steel (600 mm dia, 6m L) with 80 tubes (1-inch dia) in two rows of 40, equipped with baffles. • 8-3: Light Compound Tanks (V-08A/B, V-09A/B, V-10A/B): Six horizontal carbon steel tanks (1.5m dia, 4.5m L, 14mm thick). Receive condensates, linked to heat exchangers and vacuum pumps. Liquids are pumped to the Bleaching Unit via centrifugal pumps (P-06A/B) at 7.5 kW / 1500 RPM. 9. Bleaching Unit Improves the specifications of raw light compounds for local use and marketing. • 9-1: Collection Tank (V-11): Horizontal carbon steel tank (1m dia, 2.5m L, 14mm thick) placed above the system to store and distribute light compounds to the bleaching columns. • 9-2: Bleaching Columns (V-12A/B/C): Three vertical carbon steel vessels (1m dia, 4.5m H, 14mm thick). Contain a 15 cm catalyst layer on trays to bleach raw liquids into high-quality compounds, collected in a bottom horizontal tank. The catalyst is a calcined mixture of Bentonite and Zinc Oxide granules (2-3 mm) homogenized in water, which can be reactivated with steam and 5% HCl. • 9-3: Supporting Pumps: Vacuum pumps (VP-04A/B) at 5.5 kW extract vapors to the scrubber. Centrifugal pumps (P-09A/B) at 7.5 kW push bleached liquids to final tanks. 10. Production Tanks (V-13 A-F & V-18 A-C) • Light Products: Six horizontal carbon steel tanks (2.8m dia, 9m L, 55-ton capacity). V-13A/B for light naphtha, V-13C/D for Gas Oil, V-13E/F for diesel. • Asphalt: Three vertical carbon steel tanks (V-18A/B/C) (5m dia, 9m H). Equipped with thermal oil heating coils to keep asphalt liquid. Fully insulated (90 kg/m³ glass wool, 1.8mm aluminum cover). 11. Supporting Systems • 11-1: Gas Washing (Scrubber) System: Treats non-condensable gases before atmospheric release. Contains V-14 washing tank (1m dia, 2.8m L), a 500mm Flare stack with 3 ignitors, and a 1m x 1m LPG tank (V-15) for ignition. • 11-2: Cooling Tower: Provides cooling water for heat exchangers. Galvanized pressed steel basin (16m L x 2.4m W x 2.8m H), FRP casing, top fans, water distributors, and fill media. Includes Accumulator tank V-20 (1.5m dia, 2m L) and 11 kW pushing pumps (P-14A/B). • 11-3: Thermal Oil Boilers: Includes oil tank, heating boiler, oil pumps, and heating accelerators. • 11-4: Distillation Tower Raw Boilers • 11-5: Power Generation System • 11-6: Production Laboratory • 11-7: Control and Operation Room • 11-8: Catalyst System: Contains a vertical diesel tank (1m dia, 1.5m H) with a 1 kW centrifugal pump (P-11). Two vertical carbon steel tanks (V-17A/B, 1.5m dia, 4.5m H) with an MX-03 hydromotor mixer (7.5 kW, 30 RPM). V-17A is for preparation, V-17B pumps catalyst to the reactor. ________________________________________ Catalyst Chemical Components & Formulations 1. Alumina (Al2O3): Enhances the cracking of chemical bonds in heavy bitumen chains and increases Gas Oil extraction yield. 2. Manganese Dioxide (MnO2): Accelerates the reaction, reduces reaction time, and acts as a gasoline improver. 3. Silicon Dioxide (SiO2): Increases acceleration and reduces reaction time. 4. Iron Oxides (Fe2O): Accelerates the reaction, prevents pipe corrosion, and stops sulfur and wax from sticking to pipes and pumps. Weight Ratios (WT/WT) to Produce One Barrel (200 Liters) of Catalyst: 1. Alumina: Varies by feed: 2-2.5% for Bitumen / 4-5% for Vacuum Residue (VR) / 2-2.5% for Heavy Fuel Oil (HFO). To increase Gas Oil/Diesel (Light fuel) yield, Alumina can be added up to a maximum of 10%. 2. Manganese Dioxide: 2-2.5% for HFO / 4-5% for VR and Bitumen. 3. Iron Oxides: 2-2.5% across all feeds. 4. Silicon Dioxide: 2-2.5% for HFO / 4-5% for Bitumen and VR. 5. Remaining Volume: Filled with C-oil. Note: One barrel (200 Liters) of this mixture is added for every 5 tons of HFO, VR, or Bitumen. Manufacturing Mechanism: All components are placed in a tank, initially mixed with water, and heated to 80-120°C with continuous mixing (20-30 RPM). Once foam is generated, the product is allowed to cool to 80°C. The heating process up to 120°C is repeated 3 or 4 times until foaming ceases. Finally, the temperature is raised to 150°C, and the mixture is topped off to 200 liters using C-oil. To further improve light compound specifications, Zinc Oxide (300 grams) is mixed with 20 kg of Bentonite in C-oil. This is added alongside the catalyst at a ratio of 1/5 barrel of catalyst added to the reactor.
019
Hero
Specialized Bitumen Refining Plant Governorate: Anbar / Hit District Production Capacity: ( ) Tons/Day The city of Hit in the Anbar Governorate is considered one of the most famous areas in the world for its natural "bitumen springs," which have been used for thousands of years (dating back to the Babylonian and Assyrian eras). However, processing this bitumen for modern use requires technical steps to transform it from a raw material into a viable product for construction or industrial applications. Bitumen emerges from these springs as a highly viscous liquid mixed with sulfurous water, salts, and mud impurities. This "Natural Asphalt" differs from petroleum bitumen produced in refineries, and it can also appear in the form of rocky or spongy blocks mixed with mud. To obtain industrially usable products from this bitumen, specifically for: 1. Waterproofing (Felt/Membranes): Considered one of the best coating materials for building foundations to prevent moisture leakage due to its high resistance to hydrolysis. 2. Road Paving: Mixed with gravel and sand to produce asphalt concrete. It is characterized by exceptionally high cohesive strength compared to industrial bitumen. The natural bitumen from these springs must undergo several fundamental processing stages to become industrially viable: 1. Collection and Sedimentation: Bitumen is collected from the springs or quarry sites and left in designated basins to allow the sulfurous water to naturally separate (due to density differences). 2. Primary Heating: The raw bitumen is placed in large boilers to: a. Evaporate the remaining water. b. Reduce viscosity for easier handling. 3. Filtration and Purification: The heated bitumen is screened to remove solid impurities such as gravel, dirt, and suspended organic matter. 4. Secondary Heating and Cooking: The temperature of the bitumen is raised, improving agents are added, and it is prepared for the vacuum distillation process. 5. Vacuum Distillation: The distillation process is conducted under low pressure (vacuum pressure), which allows for: a. The separation of light oils and volatile substances at lower temperatures. b. The production of highly pure "Hard Asphalt," which is highly demanded in the construction industry. ________________________________________ Plant Components and Operational Stages The specialized bitumen plant for processing raw natural bitumen (in both liquid and solid states) consists of a range of specialized equipment designed according to the latest international standards. This equipment aligns with the technical and engineering requirements for bitumen products, complies with Iraqi standard specifications, and adheres to environmental considerations in the Anbar Governorate. 1. Extraction Stage The raw material (solid or liquid) is extracted from quarries designated by the Geological Survey Authority using specialized mechanical equipment. It is stored in stocks or special basins for solid materials, then transported to the refinery site using specialized transport vehicles of various capacities. 2. Storage Stage The raw materials are stored in designated yards to ensure a sufficient inventory for continuous, uninterrupted production for no less than 7 working days. 3. Raw Material Preparation and Primary Heating Stage Raw materials are fed into the plant via hydraulic lifts. This stage includes: • 3-1: Crushing and Digestion: Solid raw materials from the quarries are broken down and digested using a digester (SH-01) equipped with double blades driven by hydraulic motors (22.5 kW capacity). The digester is 5 meters long and 1.80 meters in diameter, made of carbon steel, with Stainless Steel 304 blades. It includes a Stainless Steel piston driven by a 7.5 kW electric motor. • 3-2: Primary Heating: This melts the bitumen and improves pumpability through pipes and pumps. • 3-3: Efficiency Enhancement: To increase melting efficiency, Gas Oil is added to the primary heating basin at a ratio of 1:5 per ton of solid raw material entering the basin (this ratio decreases when using liquid raw bitumen). o 3-2-1: Primary Melting Basin (TK-01): Raw material is heated in a concrete tank (25m L x 5m W x 3m H) with a maximum storage capacity of 300 tons. Heating pipes circulate thermal fluid (oil) at 125°C, with a retention time of 4-6 hours. The tank is internally lined with 6-8 mm carbon steel plates to protect the heating pipes from corrosion. It contains 8 Stainless Steel 304 mixers (MX-01 A/B/C/D/E/F) driven by 7.5 kW electric motors (50 RPM) and gearboxes (1:60 ratio) to mix the material, increase heating efficiency, reduce retention time, and circulate the melted bitumen to eliminate dissolved water, resulting in a homogeneous melt. Covered with a carbon steel roof with service hatches, it connects to an air duct (30x60 cm) linked to 2 air blowers (AB-01A/B) (one operating, one standby) at 22.5 kW / 1500 RPM. These extract water vapor and sulfur fumes, sending them to a scrubber before atmospheric release and water recycling. o 3-2-2: Primary Collection Tank (V-01): A carbon steel tank (12-14 mm thick) with a maximum capacity of 125 tons (10m L x 5m W x 3m H). It connects directly to the primary tank (TK-01) via channels and movable gates to receive only liquid raw material. It contains thermal oil pipes to maintain the liquid raw material at 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum outer cover. Impurities larger than 35 mm are removed and collected in a waste tank. o 3-2-3: Screw Conveyors (SC-01 A/B): Carbon steel screw conveyors with a double-jacketed outer cover filled with thermal oil to maintain the 140°C temperature. Driven by 22.5 kW electric motors (3000 RPM) with 1:40 gearboxes, they transport the liquid raw material to the preliminary filtration unit. 4. Purification Unit Removes suspended impurities from the liquid raw material in two stages: • 4-1: Preliminary Purification Tank (V-02): A carbon steel tank (12-14 mm thick, 125-ton capacity, 5m L x 10m W x 3m H). Receives liquid raw material from the primary collection tank. Contains thermal oil pipes to maintain 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Impurities larger than 15 mm are removed to a waste tank. Material is pumped to the final filtration stage via gear pumps (GP-01 A/B) (one operating, one standby) at 22.5 kW / 1000 RPM. • 4-2: Final Filtration Unit (FT-01): Removes remaining impurities by passing liquids through box filters arranged in 2 trains (8 per train). They feature a two-layer Stainless Steel filter mesh (specified microns) wrapped around square boxes. Liquid enters from the outside, and pure liquid is collected from the inside via a pipe network connected to a manifold. This is driven by two vacuum pumps (VP-01A/B) connected to the raw material tanks. 5. Raw Material Tanks (V-03 A-J) Ten carbon steel tanks (2.5m diameter, 9m length, 14 mm thickness, 45-ton max capacity) equipped with thermal oil heating coils. They receive, store, and prepare the purified raw material for the subsequent cooking reaction. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Connected by a pipe/valve network, the material is pumped via two centrifugal pumps (P-01 A/B) at 22.5 kW / 3000 RPM to the reactor unit. The tanks connect to a pipe network driven by vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM, pushing heating gases and vapors to the gas washing tank (V-14). 6. Reactor (Cooking) Unit (V-04 A/B) Consists of three reactors (55 tons each) that prepare the raw material for vacuum distillation and extract light naphtha compounds. • 6-1: Cooking Process: o 6-1-1: Catalyst System: Consists of two tanks. One prepares the catalyst mixture (1.5m dia, 4m H, 8mm carbon steel) with a mixer (MX-03) driven by a hydromotor and 1:40 gearbox. The second stores Gas Oil added to the preparation unit (1.5m dia, 1m H, 5mm carbon steel) with a 0.5 HP centrifugal pump. o 6-1-2: Reaction Tanks (V-04/05/06A): Three carbon steel tanks (2.8m dia, 9m L, 14mm thick, 55-ton max). Each has 2 Stainless Steel mixers (MX-02 A/B/C/D/E/F) driven by a 7.5 kW motor (1500 RPM) with a 1:40 gearbox. Contains an internal heating system powered by a Gas Oil burner to raise the temperature to 180°C. Catalyst is injected via dosing pumps (DP-01A/B) to increase naphtha extraction efficiency. Material is circulated during cooking by two centrifugal pumps per reactor (P-04A/B/C/D/E/F) (one active, one standby) to reduce retention time to 3-4 hours. After cooking, material is moved to the attached tank (V-04/05/06B) for storage before distillation. Fully insulated. o 6-1-3: Cooked Material Tank (V-04/05/06B): Carbon steel tank (2.8m dia, 9m L, 14mm thick) with thermal oil pipes to maintain 190-200°C. Fully insulated. Material is pumped to the vacuum distillation tower via centrifugal pumps (P-05A/B) (one active, one standby) at 22.5 kW / 3000 RPM. 7. Raw Naphtha Storage Unit Collects and condenses naphtha extracted during cooking. • 7-1-1: Raw Naphtha Tanks (V-07A/B/C): Three vertical Stainless Steel 304 tanks (1.5m dia, 5m H) connected to three heat exchangers and two pump pairs. Equipped internally with water spray nozzles on a ring pipe to wash non-condensable gases. • 7-1-2: Heat Exchangers (HE-01A/B/C): Condense naphtha vapors from 140°C down to 40°C using water from the cooling tower. Connected in series. Shell & Tube type, carbon steel (510 mm dia, 6m L) with 70 tubes (0.75-inch dia) in two rows of 35. Includes internal baffles for efficiency. • 7-1-3: Supporting Pumps: Vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM draw naphtha vapors from reactors to the heat exchangers, pushing non-condensable gases to the scrubber (V-14). Centrifugal pumps (P-02A/B) at 11.5 kW / 1500 RPM transport liquid raw naphtha to the Bleaching Unit. 8. Vacuum Distillation Unit The core of the plant, separating remaining light compounds and producing hard asphalt. • 8-1-1: Vacuum Distillation Tower: A vertical tower (~16m total height, 14mm carbon steel). Bottom section (Reboiler) is 3.5m dia x 1.2m H; top section is 1.5m dia x 12m H. Fully insulated. Fed with cooked material at 190-200°C via pumps (P-05A/B). To start extraction (remaining naphtha, Gas Oil, diesel), temperature is raised to 240-250°C using Heating Coil 1 via pumps (P-08A/B) at 55 kW / 3000 RPM, with continuous circulation via pumps (P-07A/B). Vacuum pumps (VP-03A/B) maintain 0.3-0.5 mbar pressure. Light compounds are extracted, condensed (HE-02A/B/C), and stored (V-08/09/10 A/B) over 2.5-3 hours. Afterward, material is heated via Heating Coil 2 to 320-340°C to finalize extraction and produce hard bitumen. Product is extracted via pumps (P-07A/B) at ~320°C, cooled via cooling tower coils, and sent to final tanks (V-18A/B/C). Batch processing takes 6-7 hours daily; continuous operation is possible. • 8-1-2: Supporting Pumps: Vacuum pumps (VP-03A/B) at 5.5 kW / 3000 RPM draw light vapors for condensation. Circulation centrifugal pumps (P-08A/B) at 55 kW move hot material to heating coils; (P-07A/B) circulate material and pump final bitumen product. • 8-1-3: Heating Coils 1 & 2: Carbon steel 4-inch diameter coils heated externally by a Gas Oil burner. Connected in series to heat liquid bitumen in two stages to prevent degradation. • 8-2: Heat Exchangers (HE-02A/B/C): Condense light compound vapors from 240°C to 40°C. Shell & Tube type, carbon steel (600 mm dia, 6m L) with 80 tubes (1-inch dia) in two rows of 40, equipped with baffles. • 8-3: Light Compound Tanks (V-08A/B, V-09A/B, V-10A/B): Six horizontal carbon steel tanks (1.5m dia, 4.5m L, 14mm thick). Receive condensates, linked to heat exchangers and vacuum pumps. Liquids are pumped to the Bleaching Unit via centrifugal pumps (P-06A/B) at 7.5 kW / 1500 RPM. 9. Bleaching Unit Improves the specifications of raw light compounds for local use and marketing. • 9-1: Collection Tank (V-11): Horizontal carbon steel tank (1m dia, 2.5m L, 14mm thick) placed above the system to store and distribute light compounds to the bleaching columns. • 9-2: Bleaching Columns (V-12A/B/C): Three vertical carbon steel vessels (1m dia, 4.5m H, 14mm thick). Contain a 15 cm catalyst layer on trays to bleach raw liquids into high-quality compounds, collected in a bottom horizontal tank. The catalyst is a calcined mixture of Bentonite and Zinc Oxide granules (2-3 mm) homogenized in water, which can be reactivated with steam and 5% HCl. • 9-3: Supporting Pumps: Vacuum pumps (VP-04A/B) at 5.5 kW extract vapors to the scrubber. Centrifugal pumps (P-09A/B) at 7.5 kW push bleached liquids to final tanks. 10. Production Tanks (V-13 A-F & V-18 A-C) • Light Products: Six horizontal carbon steel tanks (2.8m dia, 9m L, 55-ton capacity). V-13A/B for light naphtha, V-13C/D for Gas Oil, V-13E/F for diesel. • Asphalt: Three vertical carbon steel tanks (V-18A/B/C) (5m dia, 9m H). Equipped with thermal oil heating coils to keep asphalt liquid. Fully insulated (90 kg/m³ glass wool, 1.8mm aluminum cover). 11. Supporting Systems • 11-1: Gas Washing (Scrubber) System: Treats non-condensable gases before atmospheric release. Contains V-14 washing tank (1m dia, 2.8m L), a 500mm Flare stack with 3 ignitors, and a 1m x 1m LPG tank (V-15) for ignition. • 11-2: Cooling Tower: Provides cooling water for heat exchangers. Galvanized pressed steel basin (16m L x 2.4m W x 2.8m H), FRP casing, top fans, water distributors, and fill media. Includes Accumulator tank V-20 (1.5m dia, 2m L) and 11 kW pushing pumps (P-14A/B). • 11-3: Thermal Oil Boilers: Includes oil tank, heating boiler, oil pumps, and heating accelerators. • 11-4: Distillation Tower Raw Boilers • 11-5: Power Generation System • 11-6: Production Laboratory • 11-7: Control and Operation Room • 11-8: Catalyst System: Contains a vertical diesel tank (1m dia, 1.5m H) with a 1 kW centrifugal pump (P-11). Two vertical carbon steel tanks (V-17A/B, 1.5m dia, 4.5m H) with an MX-03 hydromotor mixer (7.5 kW, 30 RPM). V-17A is for preparation, V-17B pumps catalyst to the reactor. ________________________________________ Catalyst Chemical Components & Formulations 1. Alumina (Al2O3): Enhances the cracking of chemical bonds in heavy bitumen chains and increases Gas Oil extraction yield. 2. Manganese Dioxide (MnO2): Accelerates the reaction, reduces reaction time, and acts as a gasoline improver. 3. Silicon Dioxide (SiO2): Increases acceleration and reduces reaction time. 4. Iron Oxides (Fe2O): Accelerates the reaction, prevents pipe corrosion, and stops sulfur and wax from sticking to pipes and pumps. Weight Ratios (WT/WT) to Produce One Barrel (200 Liters) of Catalyst: 1. Alumina: Varies by feed: 2-2.5% for Bitumen / 4-5% for Vacuum Residue (VR) / 2-2.5% for Heavy Fuel Oil (HFO). To increase Gas Oil/Diesel (Light fuel) yield, Alumina can be added up to a maximum of 10%. 2. Manganese Dioxide: 2-2.5% for HFO / 4-5% for VR and Bitumen. 3. Iron Oxides: 2-2.5% across all feeds. 4. Silicon Dioxide: 2-2.5% for HFO / 4-5% for Bitumen and VR. 5. Remaining Volume: Filled with C-oil. Note: One barrel (200 Liters) of this mixture is added for every 5 tons of HFO, VR, or Bitumen. Manufacturing Mechanism: All components are placed in a tank, initially mixed with water, and heated to 80-120°C with continuous mixing (20-30 RPM). Once foam is generated, the product is allowed to cool to 80°C. The heating process up to 120°C is repeated 3 or 4 times until foaming ceases. Finally, the temperature is raised to 150°C, and the mixture is topped off to 200 liters using C-oil. To further improve light compound specifications, Zinc Oxide (300 grams) is mixed with 20 kg of Bentonite in C-oil. This is added alongside the catalyst at a ratio of 1/5 barrel of catalyst added to the reactor.
012
Hero
{ "prompt_type": "descriptive_replication", "reference_adherence": "STRICT_VISUAL_FIDELITY", "aspect_ratio": "4:5", "style": "1990s compact digital camera aesthetic with harsh on‑camera flash, grainy texture, washed‑out colors, high contrast, subtle chromatic aberration and halation. NO HDR, NO tone mapping, NO modern digital processing. The image looks like a raw, unedited flash photograph taken at night in a luxury modern interior (a penthouse or study), using an early digital point‑and‑shoot (e.g., Kodak DC series, Sony Mavica). The flash is the main light source – it creates deep, sharp shadows and overexposed highlights, the classic 'deer‑in‑headlights' effect. Background details are heavily darkened but faintly visible (dark wooden shelves, a leather chair, a window with city lights). Ultra‑realistic skin texture (on hands/arms), visible pores, fabric grain, metal reflections – all rendered with natural grain and no smoothing. The composition is slightly tilted, with a slight vertical banding artifact (CCD readout noise), a micro‑scratch on the lens (barely visible in lower right), and a subtle vignette with a faint greenish‑purple color shift at the edges – all adding authentic 90s digital camera character. The scene is dark, moody, powerful, with a raw, criminal‑luxury atmosphere.", "character": { "identity": "Wealthy mysterious man (Welison), early 30s, athletic build, broad shoulders, dominant posture. Bare chested (or wearing a black fitted t‑shirt?), but from previous descriptions often bare chested to show tattoo. However, holding a MacBook and money might be better with a black tactical top. But we can keep the bare chest / open jacket style. I'll make him wear a black ribbed sleeveless top (or bare chest with tactical trousers) to show the chest tattoo. Let's use a black sleeveless compression top to keep consistent with earlier 'tactical' look, but also allow the tattoo to be visible? Actually, the tattoo is on the upper chest – if he's holding items in both hands, his chest might be exposed. I'll describe him wearing a black tailored jacket (unbuttoned) or just bare chest? To avoid overcomplicating, I'll use a black fitted vest (tactical) that leaves arms and upper chest exposed, so the tattoo can be seen. Or simply bare chested with black trousers. Let's go with bare chested (as in many previous prompts) to show the tattoo.", "face_and_head": { "visibility": "completely obscured by a black ribbed balaclava (full‑face coverage, no openings) with a metallic silver‑grey embroidered Masonic pattern (all‑seeing eye, pyramid, geometric symbols). Over the balaclava, rectangular gold‑frame sunglasses (semi‑rimless, dark grey gradient lenses, Masonic logo on left lens)." }, "torso_and_tattoo": { "description": "Bare chest, slightly sweaty. Large tattoo on center chest in Chicano‑smoke style: dark clouds, swirling smoke, soft waves merging into skin. In the center, the word 'ШРЕДЕР' in a bold calligraphic brushstroke style with a thin white double outline, creating a subtle glow. Below the text, a Masonic pyramid with an all‑seeing eye and geometric symbols." }, "necklace": "Thick, heavy moissanite chain, Cuban link weave, spelling 'SHREDE1RR' with large letters, hanging onto bare chest.", "clothing": { "description": "Bare chested. Black tailored trousers (slim fit, low waist), black leather belt, barefoot or black shoes (not visible)." }, "hands_and_props": { "left_hand": "Holding a silver MacBook laptop (closed or slightly open? Preferably closed, held flat or at an angle). The MacBook screen is dark, the aluminum body reflects the flash with bright specular highlights.", "right_hand": "Holding a very thick stack of 50‑euro banknotes (approx. 10‑12 cm thick, tightly bound with a white or yellow rubber band). The notes are crisp, the flash catches the holograms and the edge details, euro symbol visible on the top note.", "pose": "Standing facing the camera directly, centered, slightly low angle. Arms slightly bent, holding both items at waist or chest level. The MacBook is held horizontally by the left hand (like a tray), the money stack is held vertically or slightly tilted in the right hand, showing the thickness. The pose is dominant, wealthy, controlling." } }, "environment": { "setting": "Luxury modern penthouse study at night. Dark wooden shelves with books and abstract sculptures, a large leather armchair in the background, a window revealing faint city lights (completely darkened by flash). The desk is polished black glass, barely visible. The atmosphere is opulent and secretive.", "background": { "description": "Very dark, almost black, with faint outlines of bookshelves and a window. A single dim light source (overpowered) but not visible. The flash creates a bright circular hotspot directly behind the subject, fading to black edges." } }, "lighting_and_atmosphere": { "source": "ON‑CAMERA FLASH ONLY (early 1990s compact digital camera). No other light sources. This is NOT HDR.", "quality": "extremely harsh, high contrast, overexposed highlights on the MacBook aluminum body, the white rubber band on the money, the gold sunglasses, the moissanite chain, and the specular highlights on the sweaty skin.", "effects": [ "strong, direct flash creating hard highlights on the MacBook casing (silver reflections), on the euro banknotes holograms, and on the glossy surfaces", "the white double outline of the tattoo reflects the flash with a faint glow", "background completely black – no details visible except faint outlines", "grainy texture typical of early digital compacts (heavy grain in shadows, fine grain in highlights)", "washed out colors, skin tones pale with a slight blue/green cast from the flash", "extremely high contrast – bright whites (MacBook, money edge) next to deep blacks", "subtle chromatic aberration (purple/green fringing) on high‑contrast edges (MacBook corners, sunglasses, banknotes edges)", "slight barrel distortion, lens flare (small circular artifacts from the flash)", "vertical banding artifact (CCD readout noise) visible in the dark background", "a micro‑scratch on the lens in the lower right corner", "subtle greenish‑purple vignette at the edges" ], "color_cast": "cool white balance (slightly blue/green), typical of early digital flashes. The MacBook silver appears with a cool tint, the money is pale greenish‑yellow, skin pale.", "contrast": "extremely high (maximum)" }, "camera_and_technical": { "perspective": "Straight‑on, eye level, centered composition. Medium shot (from mid‑chest to above head). Camera distance ~1.5‑2 m.", "camera_position": "handheld, compact digital camera from early 1990s (e.g., Kodak DC series, Sony Mavica), 35mm equivalent, fixed focus or autofocus with slight softness, aperture f/2.8‑f/4, shutter speed 1/60s, ISO 200‑400 with heavy grain.", "framing": "vertical 4:5, medium shot, subject perfectly centered, slight tilt (~2‑3°), a small intruding element (a strap or finger) in the upper left corner, a micro‑scratch on the lens in lower right.", "focus": "slightly soft, typical of flash photography, the face (mask) and the items (MacBook, money) are relatively sharp, background out of focus and black.", "visual_fidelity": "grainy, low resolution aesthetic, harsh flash, no HDR, no tone mapping, ultra high quality real image (realistic because of imperfections), candid snapshot with authentic 1990s compact camera feel." }, "realism_constraints": { "allowed": [ "grain", "washed out colors", "overexposed highlights", "harsh shadows with no detail", "pitch black background", "imperfect composition (slight tilt, intruding element, lens micro‑scratch, vertical banding, vignette)", "natural skin texture on arms and chest (pores, sweat beads, muscle)", "visible carbon fiber weave (mask), aluminum texture (MacBook), paper texture (money)", "chromatic aberration", "barrel distortion", "lens flare" ], "forbidden": [ "HDR", "tone mapping", "dynamic range compression", "lifted shadows", "detail in shadows", "soft lighting", "multiple light sources", "fill light", "ambient light visible (except faint outlines)", "even exposure", "balanced lighting", "modern digital perfection", "sharp focus (clinical)", "perfect composition", "cinematic look", "8k", "masterpiece", "airbrushed skin", "plastic skin", "CGI", "3d render", "stylized", "smartphone HDR", "deep fusion", "smart HDR", "visible brand logos (except Apple on MacBook? that's fine but we can ignore)", "any facial features visible through mask", "skin on face or neck", "matte plastic mask" ] }, "negative_prompt": [ "different character", "face visible", "facial features", "eyes visible", "mouth visible", "skin on face", "skin on neck", "beauty filters", "airbrushed skin", "anime", "cartoon", "over-sharpening", "clean digital look", "perfect exposure", "smooth gradients", "messy appearance", "greasy skin", "overexposed (beyond intended aesthetic)", "HDR", "tone mapping", "dynamic range", "lifted shadows", "detail in shadows", "soft lighting", "fill light", "ambient light", "even exposure", "balanced lighting", "CGI", "3d render", "plastic texture (except carbon fiber mask)", "smooth", "airbrushed", "digital art", "painting", "deformed hands", "extra fingers", "missing fingers", "blurry (beyond intentional soft focus)", "low detail", "unrealistic proportions", "bad anatomy", "watermark", "signature", "professional photography", "studio lighting (modern softbox)", "sharp focus (clinical)", "perfect composition", "cinematic (modern)", "8k", "masterpiece", "stylized", "modern digital", "natural light (flash must dominate)", "golden hour", "teal and orange", "warm tones", "iPhone", "LED flash (only 1990s compact camera flash)", "modern smartphone", "daylight", "no flash look", "bright background", "detailed background", "left hand not holding MacBook", "right hand not holding money", "MacBook open", "money scattered" ] }
09
Nano Banana
"Behold a marvel of design—an egg-shaped tent structure that emanates an ethereal glow, inviting you into its enchanting realm. Crafted from a lightweight aluminum framework, this innovative structure features flexible rods that bend and contour effortlessly. The framework forms a circular base and a smaller circle at the top, seamlessly connected by vertical rods that resemble the ribs of an egg. The entire ovoid structure is cloaked in a resilient fabric, specifically chosen for its suitability in tent and canopy construction. The fabric elegantly envelopes the entire surface of the egg-shaped tent, accentuating the seamless and organic form of the structure. Not a single curve or contour is left untouched, as the fabric adheres flawlessly to every edge and fold. The fabric embraces the tent with a gentle embrace, creating an alluring presence that emphasizes its resemblance to a magnificent hatching egg. Step through the grand entrance, and you will discover a world of tranquility and wonder. Inside, there is only emptiness, illuminated by a soft, ambient light that bathes the interior with a serene glow. The absence of physical objects accentuates the sense of spaciousness and invites a deep sense of introspection. The space becomes a sanctuary for personal reflection and connection with oneself. As you gaze upon this remarkable structure, it seamlessly integrates with the natural surroundings, becoming a harmonious element of the landscape. The fabric-covered egg-shaped tent stands as a testament to human ingenuity, offering a captivating and immersive experience. Its exterior showcases the gentle glow that emanates from within, captivating all who behold its beauty. The size of the tent, with its complete coverage and ovoid structure, is designed for a single occupant, providing an intimate and personal space for solace and reflection. The lightweight aluminum framework, meticulously designed, forms a circular base and a smaller circle at the top, with vertical rods extending from the upper ring to the lower one, connecting them to shape the rib-like structure of the egg. Step through the open entrance, and you will enter a sanctuary of serenity, where the only companions are the soft glow and the empty expanse. Allow the encompassing light and the tranquil haven to embrace you, as you embark on a journey of introspection and connection within the allure of this egg-shaped tent."
095
DreamShaper
generate this business card: Layout 1: Modern Minimalist Colors: Primarily Atlantic Blue and Aluminum Snow. Layout:Left Side: Professional headshot in a circular or square frame. Right Side:Company Name: "SAFETY COMPLIANCE PROS" in bold, sans-serif font. Personal Name in a slightly smaller, sans-serif font. Contact information icons aligned vertically:Email icon Phone icon Location icon Geometric Corner Shape: A subtle, minimalist geometric shape in Aluminum Snow, placed at the top right corner of the card.
044
FLUX
Specialized Bitumen Refining Plant Governorate: Anbar / Hit District Production Capacity: ( ) Tons/Day The city of Hit in the Anbar Governorate is considered one of the most famous areas in the world for its natural "bitumen springs," which have been used for thousands of years (dating back to the Babylonian and Assyrian eras). However, processing this bitumen for modern use requires technical steps to transform it from a raw material into a viable product for construction or industrial applications. Bitumen emerges from these springs as a highly viscous liquid mixed with sulfurous water, salts, and mud impurities. This "Natural Asphalt" differs from petroleum bitumen produced in refineries, and it can also appear in the form of rocky or spongy blocks mixed with mud. To obtain industrially usable products from this bitumen, specifically for: 1. Waterproofing (Felt/Membranes): Considered one of the best coating materials for building foundations to prevent moisture leakage due to its high resistance to hydrolysis. 2. Road Paving: Mixed with gravel and sand to produce asphalt concrete. It is characterized by exceptionally high cohesive strength compared to industrial bitumen. The natural bitumen from these springs must undergo several fundamental processing stages to become industrially viable: 1. Collection and Sedimentation: Bitumen is collected from the springs or quarry sites and left in designated basins to allow the sulfurous water to naturally separate (due to density differences). 2. Primary Heating: The raw bitumen is placed in large boilers to: a. Evaporate the remaining water. b. Reduce viscosity for easier handling. 3. Filtration and Purification: The heated bitumen is screened to remove solid impurities such as gravel, dirt, and suspended organic matter. 4. Secondary Heating and Cooking: The temperature of the bitumen is raised, improving agents are added, and it is prepared for the vacuum distillation process. 5. Vacuum Distillation: The distillation process is conducted under low pressure (vacuum pressure), which allows for: a. The separation of light oils and volatile substances at lower temperatures. b. The production of highly pure "Hard Asphalt," which is highly demanded in the construction industry. ________________________________________ Plant Components and Operational Stages The specialized bitumen plant for processing raw natural bitumen (in both liquid and solid states) consists of a range of specialized equipment designed according to the latest international standards. This equipment aligns with the technical and engineering requirements for bitumen products, complies with Iraqi standard specifications, and adheres to environmental considerations in the Anbar Governorate. 1. Extraction Stage The raw material (solid or liquid) is extracted from quarries designated by the Geological Survey Authority using specialized mechanical equipment. It is stored in stocks or special basins for solid materials, then transported to the refinery site using specialized transport vehicles of various capacities. 2. Storage Stage The raw materials are stored in designated yards to ensure a sufficient inventory for continuous, uninterrupted production for no less than 7 working days. 3. Raw Material Preparation and Primary Heating Stage Raw materials are fed into the plant via hydraulic lifts. This stage includes: • 3-1: Crushing and Digestion: Solid raw materials from the quarries are broken down and digested using a digester (SH-01) equipped with double blades driven by hydraulic motors (22.5 kW capacity). The digester is 5 meters long and 1.80 meters in diameter, made of carbon steel, with Stainless Steel 304 blades. It includes a Stainless Steel piston driven by a 7.5 kW electric motor. • 3-2: Primary Heating: This melts the bitumen and improves pumpability through pipes and pumps. • 3-3: Efficiency Enhancement: To increase melting efficiency, Gas Oil is added to the primary heating basin at a ratio of 1:5 per ton of solid raw material entering the basin (this ratio decreases when using liquid raw bitumen). o 3-2-1: Primary Melting Basin (TK-01): Raw material is heated in a concrete tank (25m L x 5m W x 3m H) with a maximum storage capacity of 300 tons. Heating pipes circulate thermal fluid (oil) at 125°C, with a retention time of 4-6 hours. The tank is internally lined with 6-8 mm carbon steel plates to protect the heating pipes from corrosion. It contains 8 Stainless Steel 304 mixers (MX-01 A/B/C/D/E/F) driven by 7.5 kW electric motors (50 RPM) and gearboxes (1:60 ratio) to mix the material, increase heating efficiency, reduce retention time, and circulate the melted bitumen to eliminate dissolved water, resulting in a homogeneous melt. Covered with a carbon steel roof with service hatches, it connects to an air duct (30x60 cm) linked to 2 air blowers (AB-01A/B) (one operating, one standby) at 22.5 kW / 1500 RPM. These extract water vapor and sulfur fumes, sending them to a scrubber before atmospheric release and water recycling. o 3-2-2: Primary Collection Tank (V-01): A carbon steel tank (12-14 mm thick) with a maximum capacity of 125 tons (10m L x 5m W x 3m H). It connects directly to the primary tank (TK-01) via channels and movable gates to receive only liquid raw material. It contains thermal oil pipes to maintain the liquid raw material at 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum outer cover. Impurities larger than 35 mm are removed and collected in a waste tank. o 3-2-3: Screw Conveyors (SC-01 A/B): Carbon steel screw conveyors with a double-jacketed outer cover filled with thermal oil to maintain the 140°C temperature. Driven by 22.5 kW electric motors (3000 RPM) with 1:40 gearboxes, they transport the liquid raw material to the preliminary filtration unit. 4. Purification Unit Removes suspended impurities from the liquid raw material in two stages: • 4-1: Preliminary Purification Tank (V-02): A carbon steel tank (12-14 mm thick, 125-ton capacity, 5m L x 10m W x 3m H). Receives liquid raw material from the primary collection tank. Contains thermal oil pipes to maintain 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Impurities larger than 15 mm are removed to a waste tank. Material is pumped to the final filtration stage via gear pumps (GP-01 A/B) (one operating, one standby) at 22.5 kW / 1000 RPM. • 4-2: Final Filtration Unit (FT-01): Removes remaining impurities by passing liquids through box filters arranged in 2 trains (8 per train). They feature a two-layer Stainless Steel filter mesh (specified microns) wrapped around square boxes. Liquid enters from the outside, and pure liquid is collected from the inside via a pipe network connected to a manifold. This is driven by two vacuum pumps (VP-01A/B) connected to the raw material tanks. 5. Raw Material Tanks (V-03 A-J) Ten carbon steel tanks (2.5m diameter, 9m length, 14 mm thickness, 45-ton max capacity) equipped with thermal oil heating coils. They receive, store, and prepare the purified raw material for the subsequent cooking reaction. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Connected by a pipe/valve network, the material is pumped via two centrifugal pumps (P-01 A/B) at 22.5 kW / 3000 RPM to the reactor unit. The tanks connect to a pipe network driven by vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM, pushing heating gases and vapors to the gas washing tank (V-14). 6. Reactor (Cooking) Unit (V-04 A/B) Consists of three reactors (55 tons each) that prepare the raw material for vacuum distillation and extract light naphtha compounds. • 6-1: Cooking Process: o 6-1-1: Catalyst System: Consists of two tanks. One prepares the catalyst mixture (1.5m dia, 4m H, 8mm carbon steel) with a mixer (MX-03) driven by a hydromotor and 1:40 gearbox. The second stores Gas Oil added to the preparation unit (1.5m dia, 1m H, 5mm carbon steel) with a 0.5 HP centrifugal pump. o 6-1-2: Reaction Tanks (V-04/05/06A): Three carbon steel tanks (2.8m dia, 9m L, 14mm thick, 55-ton max). Each has 2 Stainless Steel mixers (MX-02 A/B/C/D/E/F) driven by a 7.5 kW motor (1500 RPM) with a 1:40 gearbox. Contains an internal heating system powered by a Gas Oil burner to raise the temperature to 180°C. Catalyst is injected via dosing pumps (DP-01A/B) to increase naphtha extraction efficiency. Material is circulated during cooking by two centrifugal pumps per reactor (P-04A/B/C/D/E/F) (one active, one standby) to reduce retention time to 3-4 hours. After cooking, material is moved to the attached tank (V-04/05/06B) for storage before distillation. Fully insulated. o 6-1-3: Cooked Material Tank (V-04/05/06B): Carbon steel tank (2.8m dia, 9m L, 14mm thick) with thermal oil pipes to maintain 190-200°C. Fully insulated. Material is pumped to the vacuum distillation tower via centrifugal pumps (P-05A/B) (one active, one standby) at 22.5 kW / 3000 RPM. 7. Raw Naphtha Storage Unit Collects and condenses naphtha extracted during cooking. • 7-1-1: Raw Naphtha Tanks (V-07A/B/C): Three vertical Stainless Steel 304 tanks (1.5m dia, 5m H) connected to three heat exchangers and two pump pairs. Equipped internally with water spray nozzles on a ring pipe to wash non-condensable gases. • 7-1-2: Heat Exchangers (HE-01A/B/C): Condense naphtha vapors from 140°C down to 40°C using water from the cooling tower. Connected in series. Shell & Tube type, carbon steel (510 mm dia, 6m L) with 70 tubes (0.75-inch dia) in two rows of 35. Includes internal baffles for efficiency. • 7-1-3: Supporting Pumps: Vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM draw naphtha vapors from reactors to the heat exchangers, pushing non-condensable gases to the scrubber (V-14). Centrifugal pumps (P-02A/B) at 11.5 kW / 1500 RPM transport liquid raw naphtha to the Bleaching Unit. 8. Vacuum Distillation Unit The core of the plant, separating remaining light compounds and producing hard asphalt. • 8-1-1: Vacuum Distillation Tower: A vertical tower (~16m total height, 14mm carbon steel). Bottom section (Reboiler) is 3.5m dia x 1.2m H; top section is 1.5m dia x 12m H. Fully insulated. Fed with cooked material at 190-200°C via pumps (P-05A/B). To start extraction (remaining naphtha, Gas Oil, diesel), temperature is raised to 240-250°C using Heating Coil 1 via pumps (P-08A/B) at 55 kW / 3000 RPM, with continuous circulation via pumps (P-07A/B). Vacuum pumps (VP-03A/B) maintain 0.3-0.5 mbar pressure. Light compounds are extracted, condensed (HE-02A/B/C), and stored (V-08/09/10 A/B) over 2.5-3 hours. Afterward, material is heated via Heating Coil 2 to 320-340°C to finalize extraction and produce hard bitumen. Product is extracted via pumps (P-07A/B) at ~320°C, cooled via cooling tower coils, and sent to final tanks (V-18A/B/C). Batch processing takes 6-7 hours daily; continuous operation is possible. • 8-1-2: Supporting Pumps: Vacuum pumps (VP-03A/B) at 5.5 kW / 3000 RPM draw light vapors for condensation. Circulation centrifugal pumps (P-08A/B) at 55 kW move hot material to heating coils; (P-07A/B) circulate material and pump final bitumen product. • 8-1-3: Heating Coils 1 & 2: Carbon steel 4-inch diameter coils heated externally by a Gas Oil burner. Connected in series to heat liquid bitumen in two stages to prevent degradation. • 8-2: Heat Exchangers (HE-02A/B/C): Condense light compound vapors from 240°C to 40°C. Shell & Tube type, carbon steel (600 mm dia, 6m L) with 80 tubes (1-inch dia) in two rows of 40, equipped with baffles. • 8-3: Light Compound Tanks (V-08A/B, V-09A/B, V-10A/B): Six horizontal carbon steel tanks (1.5m dia, 4.5m L, 14mm thick). Receive condensates, linked to heat exchangers and vacuum pumps. Liquids are pumped to the Bleaching Unit via centrifugal pumps (P-06A/B) at 7.5 kW / 1500 RPM. 9. Bleaching Unit Improves the specifications of raw light compounds for local use and marketing. • 9-1: Collection Tank (V-11): Horizontal carbon steel tank (1m dia, 2.5m L, 14mm thick) placed above the system to store and distribute light compounds to the bleaching columns. • 9-2: Bleaching Columns (V-12A/B/C): Three vertical carbon steel vessels (1m dia, 4.5m H, 14mm thick). Contain a 15 cm catalyst layer on trays to bleach raw liquids into high-quality compounds, collected in a bottom horizontal tank. The catalyst is a calcined mixture of Bentonite and Zinc Oxide granules (2-3 mm) homogenized in water, which can be reactivated with steam and 5% HCl. • 9-3: Supporting Pumps: Vacuum pumps (VP-04A/B) at 5.5 kW extract vapors to the scrubber. Centrifugal pumps (P-09A/B) at 7.5 kW push bleached liquids to final tanks. 10. Production Tanks (V-13 A-F & V-18 A-C) • Light Products: Six horizontal carbon steel tanks (2.8m dia, 9m L, 55-ton capacity). V-13A/B for light naphtha, V-13C/D for Gas Oil, V-13E/F for diesel. • Asphalt: Three vertical carbon steel tanks (V-18A/B/C) (5m dia, 9m H). Equipped with thermal oil heating coils to keep asphalt liquid. Fully insulated (90 kg/m³ glass wool, 1.8mm aluminum cover). 11. Supporting Systems • 11-1: Gas Washing (Scrubber) System: Treats non-condensable gases before atmospheric release. Contains V-14 washing tank (1m dia, 2.8m L), a 500mm Flare stack with 3 ignitors, and a 1m x 1m LPG tank (V-15) for ignition. • 11-2: Cooling Tower: Provides cooling water for heat exchangers. Galvanized pressed steel basin (16m L x 2.4m W x 2.8m H), FRP casing, top fans, water distributors, and fill media. Includes Accumulator tank V-20 (1.5m dia, 2m L) and 11 kW pushing pumps (P-14A/B). • 11-3: Thermal Oil Boilers: Includes oil tank, heating boiler, oil pumps, and heating accelerators. • 11-4: Distillation Tower Raw Boilers • 11-5: Power Generation System • 11-6: Production Laboratory • 11-7: Control and Operation Room • 11-8: Catalyst System: Contains a vertical diesel tank (1m dia, 1.5m H) with a 1 kW centrifugal pump (P-11). Two vertical carbon steel tanks (V-17A/B, 1.5m dia, 4.5m H) with an MX-03 hydromotor mixer (7.5 kW, 30 RPM). V-17A is for preparation, V-17B pumps catalyst to the reactor. ________________________________________ Catalyst Chemical Components & Formulations 1. Alumina (Al2O3): Enhances the cracking of chemical bonds in heavy bitumen chains and increases Gas Oil extraction yield. 2. Manganese Dioxide (MnO2): Accelerates the reaction, reduces reaction time, and acts as a gasoline improver. 3. Silicon Dioxide (SiO2): Increases acceleration and reduces reaction time. 4. Iron Oxides (Fe2O): Accelerates the reaction, prevents pipe corrosion, and stops sulfur and wax from sticking to pipes and pumps. Weight Ratios (WT/WT) to Produce One Barrel (200 Liters) of Catalyst: 1. Alumina: Varies by feed: 2-2.5% for Bitumen / 4-5% for Vacuum Residue (VR) / 2-2.5% for Heavy Fuel Oil (HFO). To increase Gas Oil/Diesel (Light fuel) yield, Alumina can be added up to a maximum of 10%. 2. Manganese Dioxide: 2-2.5% for HFO / 4-5% for VR and Bitumen. 3. Iron Oxides: 2-2.5% across all feeds. 4. Silicon Dioxide: 2-2.5% for HFO / 4-5% for Bitumen and VR. 5. Remaining Volume: Filled with C-oil. Note: One barrel (200 Liters) of this mixture is added for every 5 tons of HFO, VR, or Bitumen. Manufacturing Mechanism: All components are placed in a tank, initially mixed with water, and heated to 80-120°C with continuous mixing (20-30 RPM). Once foam is generated, the product is allowed to cool to 80°C. The heating process up to 120°C is repeated 3 or 4 times until foaming ceases. Finally, the temperature is raised to 150°C, and the mixture is topped off to 200 liters using C-oil. To further improve light compound specifications, Zinc Oxide (300 grams) is mixed with 20 kg of Bentonite in C-oil. This is added alongside the catalyst at a ratio of 1/5 barrel of catalyst added to the reactor.
015
Hero
Specialized Bitumen Refining Plant Governorate: Anbar / Hit District Production Capacity: ( ) Tons/Day The city of Hit in the Anbar Governorate is considered one of the most famous areas in the world for its natural "bitumen springs," which have been used for thousands of years (dating back to the Babylonian and Assyrian eras). However, processing this bitumen for modern use requires technical steps to transform it from a raw material into a viable product for construction or industrial applications. Bitumen emerges from these springs as a highly viscous liquid mixed with sulfurous water, salts, and mud impurities. This "Natural Asphalt" differs from petroleum bitumen produced in refineries, and it can also appear in the form of rocky or spongy blocks mixed with mud. To obtain industrially usable products from this bitumen, specifically for: 1. Waterproofing (Felt/Membranes): Considered one of the best coating materials for building foundations to prevent moisture leakage due to its high resistance to hydrolysis. 2. Road Paving: Mixed with gravel and sand to produce asphalt concrete. It is characterized by exceptionally high cohesive strength compared to industrial bitumen. The natural bitumen from these springs must undergo several fundamental processing stages to become industrially viable: 1. Collection and Sedimentation: Bitumen is collected from the springs or quarry sites and left in designated basins to allow the sulfurous water to naturally separate (due to density differences). 2. Primary Heating: The raw bitumen is placed in large boilers to: a. Evaporate the remaining water. b. Reduce viscosity for easier handling. 3. Filtration and Purification: The heated bitumen is screened to remove solid impurities such as gravel, dirt, and suspended organic matter. 4. Secondary Heating and Cooking: The temperature of the bitumen is raised, improving agents are added, and it is prepared for the vacuum distillation process. 5. Vacuum Distillation: The distillation process is conducted under low pressure (vacuum pressure), which allows for: a. The separation of light oils and volatile substances at lower temperatures. b. The production of highly pure "Hard Asphalt," which is highly demanded in the construction industry. ________________________________________ Plant Components and Operational Stages The specialized bitumen plant for processing raw natural bitumen (in both liquid and solid states) consists of a range of specialized equipment designed according to the latest international standards. This equipment aligns with the technical and engineering requirements for bitumen products, complies with Iraqi standard specifications, and adheres to environmental considerations in the Anbar Governorate. 1. Extraction Stage The raw material (solid or liquid) is extracted from quarries designated by the Geological Survey Authority using specialized mechanical equipment. It is stored in stocks or special basins for solid materials, then transported to the refinery site using specialized transport vehicles of various capacities. 2. Storage Stage The raw materials are stored in designated yards to ensure a sufficient inventory for continuous, uninterrupted production for no less than 7 working days. 3. Raw Material Preparation and Primary Heating Stage Raw materials are fed into the plant via hydraulic lifts. This stage includes: • 3-1: Crushing and Digestion: Solid raw materials from the quarries are broken down and digested using a digester (SH-01) equipped with double blades driven by hydraulic motors (22.5 kW capacity). The digester is 5 meters long and 1.80 meters in diameter, made of carbon steel, with Stainless Steel 304 blades. It includes a Stainless Steel piston driven by a 7.5 kW electric motor. • 3-2: Primary Heating: This melts the bitumen and improves pumpability through pipes and pumps. • 3-3: Efficiency Enhancement: To increase melting efficiency, Gas Oil is added to the primary heating basin at a ratio of 1:5 per ton of solid raw material entering the basin (this ratio decreases when using liquid raw bitumen). o 3-2-1: Primary Melting Basin (TK-01): Raw material is heated in a concrete tank (25m L x 5m W x 3m H) with a maximum storage capacity of 300 tons. Heating pipes circulate thermal fluid (oil) at 125°C, with a retention time of 4-6 hours. The tank is internally lined with 6-8 mm carbon steel plates to protect the heating pipes from corrosion. It contains 8 Stainless Steel 304 mixers (MX-01 A/B/C/D/E/F) driven by 7.5 kW electric motors (50 RPM) and gearboxes (1:60 ratio) to mix the material, increase heating efficiency, reduce retention time, and circulate the melted bitumen to eliminate dissolved water, resulting in a homogeneous melt. Covered with a carbon steel roof with service hatches, it connects to an air duct (30x60 cm) linked to 2 air blowers (AB-01A/B) (one operating, one standby) at 22.5 kW / 1500 RPM. These extract water vapor and sulfur fumes, sending them to a scrubber before atmospheric release and water recycling. o 3-2-2: Primary Collection Tank (V-01): A carbon steel tank (12-14 mm thick) with a maximum capacity of 125 tons (10m L x 5m W x 3m H). It connects directly to the primary tank (TK-01) via channels and movable gates to receive only liquid raw material. It contains thermal oil pipes to maintain the liquid raw material at 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum outer cover. Impurities larger than 35 mm are removed and collected in a waste tank. o 3-2-3: Screw Conveyors (SC-01 A/B): Carbon steel screw conveyors with a double-jacketed outer cover filled with thermal oil to maintain the 140°C temperature. Driven by 22.5 kW electric motors (3000 RPM) with 1:40 gearboxes, they transport the liquid raw material to the preliminary filtration unit. 4. Purification Unit Removes suspended impurities from the liquid raw material in two stages: • 4-1: Preliminary Purification Tank (V-02): A carbon steel tank (12-14 mm thick, 125-ton capacity, 5m L x 10m W x 3m H). Receives liquid raw material from the primary collection tank. Contains thermal oil pipes to maintain 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Impurities larger than 15 mm are removed to a waste tank. Material is pumped to the final filtration stage via gear pumps (GP-01 A/B) (one operating, one standby) at 22.5 kW / 1000 RPM. • 4-2: Final Filtration Unit (FT-01): Removes remaining impurities by passing liquids through box filters arranged in 2 trains (8 per train). They feature a two-layer Stainless Steel filter mesh (specified microns) wrapped around square boxes. Liquid enters from the outside, and pure liquid is collected from the inside via a pipe network connected to a manifold. This is driven by two vacuum pumps (VP-01A/B) connected to the raw material tanks. 5. Raw Material Tanks (V-03 A-J) Ten carbon steel tanks (2.5m diameter, 9m length, 14 mm thickness, 45-ton max capacity) equipped with thermal oil heating coils. They receive, store, and prepare the purified raw material for the subsequent cooking reaction. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Connected by a pipe/valve network, the material is pumped via two centrifugal pumps (P-01 A/B) at 22.5 kW / 3000 RPM to the reactor unit. The tanks connect to a pipe network driven by vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM, pushing heating gases and vapors to the gas washing tank (V-14). 6. Reactor (Cooking) Unit (V-04 A/B) Consists of three reactors (55 tons each) that prepare the raw material for vacuum distillation and extract light naphtha compounds. • 6-1: Cooking Process: o 6-1-1: Catalyst System: Consists of two tanks. One prepares the catalyst mixture (1.5m dia, 4m H, 8mm carbon steel) with a mixer (MX-03) driven by a hydromotor and 1:40 gearbox. The second stores Gas Oil added to the preparation unit (1.5m dia, 1m H, 5mm carbon steel) with a 0.5 HP centrifugal pump. o 6-1-2: Reaction Tanks (V-04/05/06A): Three carbon steel tanks (2.8m dia, 9m L, 14mm thick, 55-ton max). Each has 2 Stainless Steel mixers (MX-02 A/B/C/D/E/F) driven by a 7.5 kW motor (1500 RPM) with a 1:40 gearbox. Contains an internal heating system powered by a Gas Oil burner to raise the temperature to 180°C. Catalyst is injected via dosing pumps (DP-01A/B) to increase naphtha extraction efficiency. Material is circulated during cooking by two centrifugal pumps per reactor (P-04A/B/C/D/E/F) (one active, one standby) to reduce retention time to 3-4 hours. After cooking, material is moved to the attached tank (V-04/05/06B) for storage before distillation. Fully insulated. o 6-1-3: Cooked Material Tank (V-04/05/06B): Carbon steel tank (2.8m dia, 9m L, 14mm thick) with thermal oil pipes to maintain 190-200°C. Fully insulated. Material is pumped to the vacuum distillation tower via centrifugal pumps (P-05A/B) (one active, one standby) at 22.5 kW / 3000 RPM. 7. Raw Naphtha Storage Unit Collects and condenses naphtha extracted during cooking. • 7-1-1: Raw Naphtha Tanks (V-07A/B/C): Three vertical Stainless Steel 304 tanks (1.5m dia, 5m H) connected to three heat exchangers and two pump pairs. Equipped internally with water spray nozzles on a ring pipe to wash non-condensable gases. • 7-1-2: Heat Exchangers (HE-01A/B/C): Condense naphtha vapors from 140°C down to 40°C using water from the cooling tower. Connected in series. Shell & Tube type, carbon steel (510 mm dia, 6m L) with 70 tubes (0.75-inch dia) in two rows of 35. Includes internal baffles for efficiency. • 7-1-3: Supporting Pumps: Vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM draw naphtha vapors from reactors to the heat exchangers, pushing non-condensable gases to the scrubber (V-14). Centrifugal pumps (P-02A/B) at 11.5 kW / 1500 RPM transport liquid raw naphtha to the Bleaching Unit. 8. Vacuum Distillation Unit The core of the plant, separating remaining light compounds and producing hard asphalt. • 8-1-1: Vacuum Distillation Tower: A vertical tower (~16m total height, 14mm carbon steel). Bottom section (Reboiler) is 3.5m dia x 1.2m H; top section is 1.5m dia x 12m H. Fully insulated. Fed with cooked material at 190-200°C via pumps (P-05A/B). To start extraction (remaining naphtha, Gas Oil, diesel), temperature is raised to 240-250°C using Heating Coil 1 via pumps (P-08A/B) at 55 kW / 3000 RPM, with continuous circulation via pumps (P-07A/B). Vacuum pumps (VP-03A/B) maintain 0.3-0.5 mbar pressure. Light compounds are extracted, condensed (HE-02A/B/C), and stored (V-08/09/10 A/B) over 2.5-3 hours. Afterward, material is heated via Heating Coil 2 to 320-340°C to finalize extraction and produce hard bitumen. Product is extracted via pumps (P-07A/B) at ~320°C, cooled via cooling tower coils, and sent to final tanks (V-18A/B/C). Batch processing takes 6-7 hours daily; continuous operation is possible. • 8-1-2: Supporting Pumps: Vacuum pumps (VP-03A/B) at 5.5 kW / 3000 RPM draw light vapors for condensation. Circulation centrifugal pumps (P-08A/B) at 55 kW move hot material to heating coils; (P-07A/B) circulate material and pump final bitumen product. • 8-1-3: Heating Coils 1 & 2: Carbon steel 4-inch diameter coils heated externally by a Gas Oil burner. Connected in series to heat liquid bitumen in two stages to prevent degradation. • 8-2: Heat Exchangers (HE-02A/B/C): Condense light compound vapors from 240°C to 40°C. Shell & Tube type, carbon steel (600 mm dia, 6m L) with 80 tubes (1-inch dia) in two rows of 40, equipped with baffles. • 8-3: Light Compound Tanks (V-08A/B, V-09A/B, V-10A/B): Six horizontal carbon steel tanks (1.5m dia, 4.5m L, 14mm thick). Receive condensates, linked to heat exchangers and vacuum pumps. Liquids are pumped to the Bleaching Unit via centrifugal pumps (P-06A/B) at 7.5 kW / 1500 RPM. 9. Bleaching Unit Improves the specifications of raw light compounds for local use and marketing. • 9-1: Collection Tank (V-11): Horizontal carbon steel tank (1m dia, 2.5m L, 14mm thick) placed above the system to store and distribute light compounds to the bleaching columns. • 9-2: Bleaching Columns (V-12A/B/C): Three vertical carbon steel vessels (1m dia, 4.5m H, 14mm thick). Contain a 15 cm catalyst layer on trays to bleach raw liquids into high-quality compounds, collected in a bottom horizontal tank. The catalyst is a calcined mixture of Bentonite and Zinc Oxide granules (2-3 mm) homogenized in water, which can be reactivated with steam and 5% HCl. • 9-3: Supporting Pumps: Vacuum pumps (VP-04A/B) at 5.5 kW extract vapors to the scrubber. Centrifugal pumps (P-09A/B) at 7.5 kW push bleached liquids to final tanks. 10. Production Tanks (V-13 A-F & V-18 A-C) • Light Products: Six horizontal carbon steel tanks (2.8m dia, 9m L, 55-ton capacity). V-13A/B for light naphtha, V-13C/D for Gas Oil, V-13E/F for diesel. • Asphalt: Three vertical carbon steel tanks (V-18A/B/C) (5m dia, 9m H). Equipped with thermal oil heating coils to keep asphalt liquid. Fully insulated (90 kg/m³ glass wool, 1.8mm aluminum cover). 11. Supporting Systems • 11-1: Gas Washing (Scrubber) System: Treats non-condensable gases before atmospheric release. Contains V-14 washing tank (1m dia, 2.8m L), a 500mm Flare stack with 3 ignitors, and a 1m x 1m LPG tank (V-15) for ignition. • 11-2: Cooling Tower: Provides cooling water for heat exchangers. Galvanized pressed steel basin (16m L x 2.4m W x 2.8m H), FRP casing, top fans, water distributors, and fill media. Includes Accumulator tank V-20 (1.5m dia, 2m L) and 11 kW pushing pumps (P-14A/B). • 11-3: Thermal Oil Boilers: Includes oil tank, heating boiler, oil pumps, and heating accelerators. • 11-4: Distillation Tower Raw Boilers • 11-5: Power Generation System • 11-6: Production Laboratory • 11-7: Control and Operation Room • 11-8: Catalyst System: Contains a vertical diesel tank (1m dia, 1.5m H) with a 1 kW centrifugal pump (P-11). Two vertical carbon steel tanks (V-17A/B, 1.5m dia, 4.5m H) with an MX-03 hydromotor mixer (7.5 kW, 30 RPM). V-17A is for preparation, V-17B pumps catalyst to the reactor. ________________________________________ Catalyst Chemical Components & Formulations 1. Alumina (Al2O3): Enhances the cracking of chemical bonds in heavy bitumen chains and increases Gas Oil extraction yield. 2. Manganese Dioxide (MnO2): Accelerates the reaction, reduces reaction time, and acts as a gasoline improver. 3. Silicon Dioxide (SiO2): Increases acceleration and reduces reaction time. 4. Iron Oxides (Fe2O): Accelerates the reaction, prevents pipe corrosion, and stops sulfur and wax from sticking to pipes and pumps. Weight Ratios (WT/WT) to Produce One Barrel (200 Liters) of Catalyst: 1. Alumina: Varies by feed: 2-2.5% for Bitumen / 4-5% for Vacuum Residue (VR) / 2-2.5% for Heavy Fuel Oil (HFO). To increase Gas Oil/Diesel (Light fuel) yield, Alumina can be added up to a maximum of 10%. 2. Manganese Dioxide: 2-2.5% for HFO / 4-5% for VR and Bitumen. 3. Iron Oxides: 2-2.5% across all feeds. 4. Silicon Dioxide: 2-2.5% for HFO / 4-5% for Bitumen and VR. 5. Remaining Volume: Filled with C-oil. Note: One barrel (200 Liters) of this mixture is added for every 5 tons of HFO, VR, or Bitumen. Manufacturing Mechanism: All components are placed in a tank, initially mixed with water, and heated to 80-120°C with continuous mixing (20-30 RPM). Once foam is generated, the product is allowed to cool to 80°C. The heating process up to 120°C is repeated 3 or 4 times until foaming ceases. Finally, the temperature is raised to 150°C, and the mixture is topped off to 200 liters using C-oil. To further improve light compound specifications, Zinc Oxide (300 grams) is mixed with 20 kg of Bentonite in C-oil. This is added alongside the catalyst at a ratio of 1/5 barrel of catalyst added to the reactor.
010
Hero
generate this business card: Layout 1: Modern Minimalist Colors: Primarily Atlantic Blue and Aluminum Snow. Layout:Left Side: Professional headshot in a circular or square frame. Right Side:Company Name: "SAFETY COMPLIANCE PROS" in bold, sans-serif font. Personal Name in a slightly smaller, sans-serif font. Contact information icons aligned vertically: Email icon Phone icon Location icon Geometric Corner Shape: A geometric shape in Aluminum Snow, placed at the top right corner of the card.
081
FLUX
A massive sheet of aluminum, very thin, wide, and long, is being compressed between two large industrial metal rollers. The rollers apply intense pressure, slightly deforming the sheet to make it perfectly flat. The setting is a modern metal processing factory, with light reflections on the shiny aluminum and detailed mechanical features on the rollers. The scene is shown from a slightly angled side perspective, with industrial lighting.
050
FLUX
"Behold a marvel of design—an egg-shaped tent structure that emanates an ethereal glow, inviting you into its enchanting realm. Crafted from a lightweight aluminum framework, this innovative structure features flexible rods that bend and contour effortlessly. The framework forms a circular base and a smaller circle at the top, seamlessly connected by vertical rods that resemble the ribs of an egg. The entire ovoid structure is cloaked in a resilient fabric, specifically chosen for its suitability in tent and canopy construction. The fabric elegantly envelopes the entire surface of the egg-shaped tent, accentuating the seamless and organic form of the structure. Not a single curve or contour is left untouched, as the fabric adheres flawlessly to every edge and fold. The fabric embraces the tent with a gentle embrace, creating an alluring presence that emphasizes its resemblance to a magnificent hatching egg. Step through the grand entrance, and you will discover a world of tranquility and wonder. Inside, there is only emptiness, illuminated by a soft, ambient light that bathes the interior with a serene glow. The absence of physical objects accentuates the sense of spaciousness and invites a deep sense of introspection. The space becomes a sanctuary for personal reflection and connection with oneself. As you gaze upon this remarkable structure, it seamlessly integrates with the natural surroundings, becoming a harmonious element of the landscape. The fabric-covered egg-shaped tent stands as a testament to human ingenuity, offering a captivating and immersive experience. Its exterior showcases the gentle glow that emanates from within, captivating all who behold its beauty. The size of the tent, with its complete coverage and ovoid structure, is designed for a single occupant, providing an intimate and personal space for solace and reflection. The lightweight aluminum framework, meticulously designed, forms a circular base and a smaller circle at the top, with vertical rods extending from the upper ring to the lower one, connecting them to shape the rib-like structure of the egg. Step through the open entrance, and you will enter a sanctuary of serenity, where the only companions are the soft glow and the empty expanse. Allow the encompassing light and the tranquil haven to embrace you, as you embark on a journey of introspection and connection within the allure of this egg-shaped tent."
1127
DreamShaper
"Behold a marvel of design—an egg-shaped tent structure that emanates an ethereal glow, inviting you into its enchanting realm. Crafted from a lightweight aluminum framework, this innovative structure features flexible rods that bend and contour effortlessly. The framework forms a circular base and a smaller circle at the top, seamlessly connected by vertical rods that resemble the ribs of an egg. The entire ovoid structure is cloaked in a resilient fabric, specifically chosen for its suitability in tent and canopy construction. The fabric elegantly envelopes the entire surface of the egg-shaped tent, accentuating the seamless and organic form of the structure. Not a single curve or contour is left untouched, as the fabric adheres flawlessly to every edge and fold. The fabric embraces the tent with a gentle embrace, creating an alluring presence that emphasizes its resemblance to a magnificent hatching egg. Step through the grand entrance, and you will discover a world of tranquility and wonder. Inside, there is only emptiness, illuminated by a soft, ambient light that bathes the interior with a serene glow. The absence of physical objects accentuates the sense of spaciousness and invites a deep sense of introspection. The space becomes a sanctuary for personal reflection and connection with oneself. As you gaze upon this remarkable structure, it seamlessly integrates with the natural surroundings, becoming a harmonious element of the landscape. The fabric-covered egg-shaped tent stands as a testament to human ingenuity, offering a captivating and immersive experience. Its exterior showcases the gentle glow that emanates from within, captivating all who behold its beauty. The size of the tent, with its complete coverage and ovoid structure, is designed for a single occupant, providing an intimate and personal space for solace and reflection. The lightweight aluminum framework, meticulously designed, forms a circular base and a smaller circle at the top, with vertical rods extending from the upper ring to the lower one, connecting them to shape the rib-like structure of the egg. Step through the open entrance, and you will enter a sanctuary of serenity, where the only companions are the soft glow and the empty expanse. Allow the encompassing light and the tranquil haven to embrace you, as you embark on a journey of introspection and connection within the allure of this egg-shaped tent."
0104
DreamShaper
A massive sheet of aluminum, very thin, wide, and long, is being compressed between two large industrial metal rollers. The rollers apply intense pressure, slightly deforming the sheet to make it perfectly flat. The setting is a modern metal processing factory, with light reflections on the shiny aluminum and detailed mechanical features on the rollers. The scene is shown from a slightly angled side perspective, with industrial lighting.
027
FLUX
{ "prompt_type": "descriptive_replication", "reference_adherence": "STRICT_VISUAL_FIDELITY", "aspect_ratio": "4:5", "style": "1990s compact digital camera aesthetic with harsh on‑camera flash, grainy texture, washed‑out colors, high contrast, subtle chromatic aberration and halation. NO HDR, NO tone mapping, NO modern digital processing. The image looks like a raw, unedited flash photograph taken at night in a luxury modern interior (a penthouse or study), using an early digital point‑and‑shoot (e.g., Kodak DC series, Sony Mavica). The flash is the main light source – it creates deep, sharp shadows and overexposed highlights, the classic 'deer‑in‑headlights' effect. Background details are heavily darkened but faintly visible (dark wooden shelves, a leather chair, a window with city lights). Ultra‑realistic skin texture (on hands/arms), visible pores, fabric grain, metal reflections – all rendered with natural grain and no smoothing. The composition is slightly tilted, with a slight vertical banding artifact (CCD readout noise), a micro‑scratch on the lens (barely visible in lower right), and a subtle vignette with a faint greenish‑purple color shift at the edges – all adding authentic 90s digital camera character. The scene is dark, moody, powerful, with a raw, criminal‑luxury atmosphere.", "character": { "identity": "Wealthy mysterious man (Welison), early 30s, athletic build, broad shoulders, dominant posture. Bare chested (or wearing a black fitted t‑shirt?), but from previous descriptions often bare chested to show tattoo. However, holding a MacBook and money might be better with a black tactical top. But we can keep the bare chest / open jacket style. I'll make him wear a black ribbed sleeveless top (or bare chest with tactical trousers) to show the chest tattoo. Let's use a black sleeveless compression top to keep consistent with earlier 'tactical' look, but also allow the tattoo to be visible? Actually, the tattoo is on the upper chest – if he's holding items in both hands, his chest might be exposed. I'll describe him wearing a black tailored jacket (unbuttoned) or just bare chest? To avoid overcomplicating, I'll use a black fitted vest (tactical) that leaves arms and upper chest exposed, so the tattoo can be seen. Or simply bare chested with black trousers. Let's go with bare chested (as in many previous prompts) to show the tattoo.", "face_and_head": { "visibility": "completely obscured by a black ribbed balaclava (full‑face coverage, no openings) with a metallic silver‑grey embroidered Masonic pattern (all‑seeing eye, pyramid, geometric symbols). Over the balaclava, rectangular gold‑frame sunglasses (semi‑rimless, dark grey gradient lenses, Masonic logo on left lens)." }, "torso_and_tattoo": { "description": "Bare chest, slightly sweaty. Large tattoo on center chest in Chicano‑smoke style: dark clouds, swirling smoke, soft waves merging into skin. In the center, the word 'ШРЕДЕР' in a bold calligraphic brushstroke style with a thin white double outline, creating a subtle glow. Below the text, a Masonic pyramid with an all‑seeing eye and geometric symbols." }, "necklace": "Thick, heavy moissanite chain, Cuban link weave, spelling 'SHREDE1RR' with large letters, hanging onto bare chest.", "clothing": { "description": "Bare chested. Black tailored trousers (slim fit, low waist), black leather belt, barefoot or black shoes (not visible)." }, "hands_and_props": { "left_hand": "Holding a silver MacBook laptop (closed or slightly open? Preferably closed, held flat or at an angle). The MacBook screen is dark, the aluminum body reflects the flash with bright specular highlights.", "right_hand": "Holding a very thick stack of 50‑euro banknotes (approx. 10‑12 cm thick, tightly bound with a white or yellow rubber band). The notes are crisp, the flash catches the holograms and the edge details, euro symbol visible on the top note.", "pose": "Standing facing the camera directly, centered, slightly low angle. Arms slightly bent, holding both items at waist or chest level. The MacBook is held horizontally by the left hand (like a tray), the money stack is held vertically or slightly tilted in the right hand, showing the thickness. The pose is dominant, wealthy, controlling." } }, "environment": { "setting": "Luxury modern penthouse study at night. Dark wooden shelves with books and abstract sculptures, a large leather armchair in the background, a window revealing faint city lights (completely darkened by flash). The desk is polished black glass, barely visible. The atmosphere is opulent and secretive.", "background": { "description": "Very dark, almost black, with faint outlines of bookshelves and a window. A single dim light source (overpowered) but not visible. The flash creates a bright circular hotspot directly behind the subject, fading to black edges." } }, "lighting_and_atmosphere": { "source": "ON‑CAMERA FLASH ONLY (early 1990s compact digital camera). No other light sources. This is NOT HDR.", "quality": "extremely harsh, high contrast, overexposed highlights on the MacBook aluminum body, the white rubber band on the money, the gold sunglasses, the moissanite chain, and the specular highlights on the sweaty skin.", "effects": [ "strong, direct flash creating hard highlights on the MacBook casing (silver reflections), on the euro banknotes holograms, and on the glossy surfaces", "the white double outline of the tattoo reflects the flash with a faint glow", "background completely black – no details visible except faint outlines", "grainy texture typical of early digital compacts (heavy grain in shadows, fine grain in highlights)", "washed out colors, skin tones pale with a slight blue/green cast from the flash", "extremely high contrast – bright whites (MacBook, money edge) next to deep blacks", "subtle chromatic aberration (purple/green fringing) on high‑contrast edges (MacBook corners, sunglasses, banknotes edges)", "slight barrel distortion, lens flare (small circular artifacts from the flash)", "vertical banding artifact (CCD readout noise) visible in the dark background", "a micro‑scratch on the lens in the lower right corner", "subtle greenish‑purple vignette at the edges" ], "color_cast": "cool white balance (slightly blue/green), typical of early digital flashes. The MacBook silver appears with a cool tint, the money is pale greenish‑yellow, skin pale.", "contrast": "extremely high (maximum)" }, "camera_and_technical": { "perspective": "Straight‑on, eye level, centered composition. Medium shot (from mid‑chest to above head). Camera distance ~1.5‑2 m.", "camera_position": "handheld, compact digital camera from early 1990s (e.g., Kodak DC series, Sony Mavica), 35mm equivalent, fixed focus or autofocus with slight softness, aperture f/2.8‑f/4, shutter speed 1/60s, ISO 200‑400 with heavy grain.", "framing": "vertical 4:5, medium shot, subject perfectly centered, slight tilt (~2‑3°), a small intruding element (a strap or finger) in the upper left corner, a micro‑scratch on the lens in lower right.", "focus": "slightly soft, typical of flash photography, the face (mask) and the items (MacBook, money) are relatively sharp, background out of focus and black.", "visual_fidelity": "grainy, low resolution aesthetic, harsh flash, no HDR, no tone mapping, ultra high quality real image (realistic because of imperfections), candid snapshot with authentic 1990s compact camera feel." }, "realism_constraints": { "allowed": [ "grain", "washed out colors", "overexposed highlights", "harsh shadows with no detail", "pitch black background", "imperfect composition (slight tilt, intruding element, lens micro‑scratch, vertical banding, vignette)", "natural skin texture on arms and chest (pores, sweat beads, muscle)", "visible carbon fiber weave (mask), aluminum texture (MacBook), paper texture (money)", "chromatic aberration", "barrel distortion", "lens flare" ], "forbidden": [ "HDR", "tone mapping", "dynamic range compression", "lifted shadows", "detail in shadows", "soft lighting", "multiple light sources", "fill light", "ambient light visible (except faint outlines)", "even exposure", "balanced lighting", "modern digital perfection", "sharp focus (clinical)", "perfect composition", "cinematic look", "8k", "masterpiece", "airbrushed skin", "plastic skin", "CGI", "3d render", "stylized", "smartphone HDR", "deep fusion", "smart HDR", "visible brand logos (except Apple on MacBook? that's fine but we can ignore)", "any facial features visible through mask", "skin on face or neck", "matte plastic mask" ] }, "negative_prompt": [ "different character", "face visible", "facial features", "eyes visible", "mouth visible", "skin on face", "skin on neck", "beauty filters", "airbrushed skin", "anime", "cartoon", "over-sharpening", "clean digital look", "perfect exposure", "smooth gradients", "messy appearance", "greasy skin", "overexposed (beyond intended aesthetic)", "HDR", "tone mapping", "dynamic range", "lifted shadows", "detail in shadows", "soft lighting", "fill light", "ambient light", "even exposure", "balanced lighting", "CGI", "3d render", "plastic texture (except carbon fiber mask)", "smooth", "airbrushed", "digital art", "painting", "deformed hands", "extra fingers", "missing fingers", "blurry (beyond intentional soft focus)", "low detail", "unrealistic proportions", "bad anatomy", "watermark", "signature", "professional photography", "studio lighting (modern softbox)", "sharp focus (clinical)", "perfect composition", "cinematic (modern)", "8k", "masterpiece", "stylized", "modern digital", "natural light (flash must dominate)", "golden hour", "teal and orange", "warm tones", "iPhone", "LED flash (only 1990s compact camera flash)", "modern smartphone", "daylight", "no flash look", "bright background", "detailed background", "left hand not holding MacBook", "right hand not holding money", "MacBook open", "money scattered" ] }
09
Nano Banana
generate this business card: Layout 1: Modern Minimalist Colors: Primarily Atlantic Blue and Aluminum Snow. Layout:Left Side: Professional headshot in a circular or square frame. Right Side:Company Name: "SAFETY COMPLIANCE PROS" in bold, sans-serif font. Personal Name in a slightly smaller, sans-serif font. Contact information icons aligned vertically: Email icon Phone icon Location icon Geometric Corner Shape: A geometric shape in Aluminum Snow, placed at the top right corner of the card.
081
FLUX
Specialized Bitumen Refining Plant Governorate: Anbar / Hit District Production Capacity: ( ) Tons/Day The city of Hit in the Anbar Governorate is considered one of the most famous areas in the world for its natural "bitumen springs," which have been used for thousands of years (dating back to the Babylonian and Assyrian eras). However, processing this bitumen for modern use requires technical steps to transform it from a raw material into a viable product for construction or industrial applications. Bitumen emerges from these springs as a highly viscous liquid mixed with sulfurous water, salts, and mud impurities. This "Natural Asphalt" differs from petroleum bitumen produced in refineries, and it can also appear in the form of rocky or spongy blocks mixed with mud. To obtain industrially usable products from this bitumen, specifically for: 1. Waterproofing (Felt/Membranes): Considered one of the best coating materials for building foundations to prevent moisture leakage due to its high resistance to hydrolysis. 2. Road Paving: Mixed with gravel and sand to produce asphalt concrete. It is characterized by exceptionally high cohesive strength compared to industrial bitumen. The natural bitumen from these springs must undergo several fundamental processing stages to become industrially viable: 1. Collection and Sedimentation: Bitumen is collected from the springs or quarry sites and left in designated basins to allow the sulfurous water to naturally separate (due to density differences). 2. Primary Heating: The raw bitumen is placed in large boilers to: a. Evaporate the remaining water. b. Reduce viscosity for easier handling. 3. Filtration and Purification: The heated bitumen is screened to remove solid impurities such as gravel, dirt, and suspended organic matter. 4. Secondary Heating and Cooking: The temperature of the bitumen is raised, improving agents are added, and it is prepared for the vacuum distillation process. 5. Vacuum Distillation: The distillation process is conducted under low pressure (vacuum pressure), which allows for: a. The separation of light oils and volatile substances at lower temperatures. b. The production of highly pure "Hard Asphalt," which is highly demanded in the construction industry. ________________________________________ Plant Components and Operational Stages The specialized bitumen plant for processing raw natural bitumen (in both liquid and solid states) consists of a range of specialized equipment designed according to the latest international standards. This equipment aligns with the technical and engineering requirements for bitumen products, complies with Iraqi standard specifications, and adheres to environmental considerations in the Anbar Governorate. 1. Extraction Stage The raw material (solid or liquid) is extracted from quarries designated by the Geological Survey Authority using specialized mechanical equipment. It is stored in stocks or special basins for solid materials, then transported to the refinery site using specialized transport vehicles of various capacities. 2. Storage Stage The raw materials are stored in designated yards to ensure a sufficient inventory for continuous, uninterrupted production for no less than 7 working days. 3. Raw Material Preparation and Primary Heating Stage Raw materials are fed into the plant via hydraulic lifts. This stage includes: • 3-1: Crushing and Digestion: Solid raw materials from the quarries are broken down and digested using a digester (SH-01) equipped with double blades driven by hydraulic motors (22.5 kW capacity). The digester is 5 meters long and 1.80 meters in diameter, made of carbon steel, with Stainless Steel 304 blades. It includes a Stainless Steel piston driven by a 7.5 kW electric motor. • 3-2: Primary Heating: This melts the bitumen and improves pumpability through pipes and pumps. • 3-3: Efficiency Enhancement: To increase melting efficiency, Gas Oil is added to the primary heating basin at a ratio of 1:5 per ton of solid raw material entering the basin (this ratio decreases when using liquid raw bitumen). o 3-2-1: Primary Melting Basin (TK-01): Raw material is heated in a concrete tank (25m L x 5m W x 3m H) with a maximum storage capacity of 300 tons. Heating pipes circulate thermal fluid (oil) at 125°C, with a retention time of 4-6 hours. The tank is internally lined with 6-8 mm carbon steel plates to protect the heating pipes from corrosion. It contains 8 Stainless Steel 304 mixers (MX-01 A/B/C/D/E/F) driven by 7.5 kW electric motors (50 RPM) and gearboxes (1:60 ratio) to mix the material, increase heating efficiency, reduce retention time, and circulate the melted bitumen to eliminate dissolved water, resulting in a homogeneous melt. Covered with a carbon steel roof with service hatches, it connects to an air duct (30x60 cm) linked to 2 air blowers (AB-01A/B) (one operating, one standby) at 22.5 kW / 1500 RPM. These extract water vapor and sulfur fumes, sending them to a scrubber before atmospheric release and water recycling. o 3-2-2: Primary Collection Tank (V-01): A carbon steel tank (12-14 mm thick) with a maximum capacity of 125 tons (10m L x 5m W x 3m H). It connects directly to the primary tank (TK-01) via channels and movable gates to receive only liquid raw material. It contains thermal oil pipes to maintain the liquid raw material at 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum outer cover. Impurities larger than 35 mm are removed and collected in a waste tank. o 3-2-3: Screw Conveyors (SC-01 A/B): Carbon steel screw conveyors with a double-jacketed outer cover filled with thermal oil to maintain the 140°C temperature. Driven by 22.5 kW electric motors (3000 RPM) with 1:40 gearboxes, they transport the liquid raw material to the preliminary filtration unit. 4. Purification Unit Removes suspended impurities from the liquid raw material in two stages: • 4-1: Preliminary Purification Tank (V-02): A carbon steel tank (12-14 mm thick, 125-ton capacity, 5m L x 10m W x 3m H). Receives liquid raw material from the primary collection tank. Contains thermal oil pipes to maintain 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Impurities larger than 15 mm are removed to a waste tank. Material is pumped to the final filtration stage via gear pumps (GP-01 A/B) (one operating, one standby) at 22.5 kW / 1000 RPM. • 4-2: Final Filtration Unit (FT-01): Removes remaining impurities by passing liquids through box filters arranged in 2 trains (8 per train). They feature a two-layer Stainless Steel filter mesh (specified microns) wrapped around square boxes. Liquid enters from the outside, and pure liquid is collected from the inside via a pipe network connected to a manifold. This is driven by two vacuum pumps (VP-01A/B) connected to the raw material tanks. 5. Raw Material Tanks (V-03 A-J) Ten carbon steel tanks (2.5m diameter, 9m length, 14 mm thickness, 45-ton max capacity) equipped with thermal oil heating coils. They receive, store, and prepare the purified raw material for the subsequent cooking reaction. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Connected by a pipe/valve network, the material is pumped via two centrifugal pumps (P-01 A/B) at 22.5 kW / 3000 RPM to the reactor unit. The tanks connect to a pipe network driven by vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM, pushing heating gases and vapors to the gas washing tank (V-14). 6. Reactor (Cooking) Unit (V-04 A/B) Consists of three reactors (55 tons each) that prepare the raw material for vacuum distillation and extract light naphtha compounds. • 6-1: Cooking Process: o 6-1-1: Catalyst System: Consists of two tanks. One prepares the catalyst mixture (1.5m dia, 4m H, 8mm carbon steel) with a mixer (MX-03) driven by a hydromotor and 1:40 gearbox. The second stores Gas Oil added to the preparation unit (1.5m dia, 1m H, 5mm carbon steel) with a 0.5 HP centrifugal pump. o 6-1-2: Reaction Tanks (V-04/05/06A): Three carbon steel tanks (2.8m dia, 9m L, 14mm thick, 55-ton max). Each has 2 Stainless Steel mixers (MX-02 A/B/C/D/E/F) driven by a 7.5 kW motor (1500 RPM) with a 1:40 gearbox. Contains an internal heating system powered by a Gas Oil burner to raise the temperature to 180°C. Catalyst is injected via dosing pumps (DP-01A/B) to increase naphtha extraction efficiency. Material is circulated during cooking by two centrifugal pumps per reactor (P-04A/B/C/D/E/F) (one active, one standby) to reduce retention time to 3-4 hours. After cooking, material is moved to the attached tank (V-04/05/06B) for storage before distillation. Fully insulated. o 6-1-3: Cooked Material Tank (V-04/05/06B): Carbon steel tank (2.8m dia, 9m L, 14mm thick) with thermal oil pipes to maintain 190-200°C. Fully insulated. Material is pumped to the vacuum distillation tower via centrifugal pumps (P-05A/B) (one active, one standby) at 22.5 kW / 3000 RPM. 7. Raw Naphtha Storage Unit Collects and condenses naphtha extracted during cooking. • 7-1-1: Raw Naphtha Tanks (V-07A/B/C): Three vertical Stainless Steel 304 tanks (1.5m dia, 5m H) connected to three heat exchangers and two pump pairs. Equipped internally with water spray nozzles on a ring pipe to wash non-condensable gases. • 7-1-2: Heat Exchangers (HE-01A/B/C): Condense naphtha vapors from 140°C down to 40°C using water from the cooling tower. Connected in series. Shell & Tube type, carbon steel (510 mm dia, 6m L) with 70 tubes (0.75-inch dia) in two rows of 35. Includes internal baffles for efficiency. • 7-1-3: Supporting Pumps: Vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM draw naphtha vapors from reactors to the heat exchangers, pushing non-condensable gases to the scrubber (V-14). Centrifugal pumps (P-02A/B) at 11.5 kW / 1500 RPM transport liquid raw naphtha to the Bleaching Unit. 8. Vacuum Distillation Unit The core of the plant, separating remaining light compounds and producing hard asphalt. • 8-1-1: Vacuum Distillation Tower: A vertical tower (~16m total height, 14mm carbon steel). Bottom section (Reboiler) is 3.5m dia x 1.2m H; top section is 1.5m dia x 12m H. Fully insulated. Fed with cooked material at 190-200°C via pumps (P-05A/B). To start extraction (remaining naphtha, Gas Oil, diesel), temperature is raised to 240-250°C using Heating Coil 1 via pumps (P-08A/B) at 55 kW / 3000 RPM, with continuous circulation via pumps (P-07A/B). Vacuum pumps (VP-03A/B) maintain 0.3-0.5 mbar pressure. Light compounds are extracted, condensed (HE-02A/B/C), and stored (V-08/09/10 A/B) over 2.5-3 hours. Afterward, material is heated via Heating Coil 2 to 320-340°C to finalize extraction and produce hard bitumen. Product is extracted via pumps (P-07A/B) at ~320°C, cooled via cooling tower coils, and sent to final tanks (V-18A/B/C). Batch processing takes 6-7 hours daily; continuous operation is possible. • 8-1-2: Supporting Pumps: Vacuum pumps (VP-03A/B) at 5.5 kW / 3000 RPM draw light vapors for condensation. Circulation centrifugal pumps (P-08A/B) at 55 kW move hot material to heating coils; (P-07A/B) circulate material and pump final bitumen product. • 8-1-3: Heating Coils 1 & 2: Carbon steel 4-inch diameter coils heated externally by a Gas Oil burner. Connected in series to heat liquid bitumen in two stages to prevent degradation. • 8-2: Heat Exchangers (HE-02A/B/C): Condense light compound vapors from 240°C to 40°C. Shell & Tube type, carbon steel (600 mm dia, 6m L) with 80 tubes (1-inch dia) in two rows of 40, equipped with baffles. • 8-3: Light Compound Tanks (V-08A/B, V-09A/B, V-10A/B): Six horizontal carbon steel tanks (1.5m dia, 4.5m L, 14mm thick). Receive condensates, linked to heat exchangers and vacuum pumps. Liquids are pumped to the Bleaching Unit via centrifugal pumps (P-06A/B) at 7.5 kW / 1500 RPM. 9. Bleaching Unit Improves the specifications of raw light compounds for local use and marketing. • 9-1: Collection Tank (V-11): Horizontal carbon steel tank (1m dia, 2.5m L, 14mm thick) placed above the system to store and distribute light compounds to the bleaching columns. • 9-2: Bleaching Columns (V-12A/B/C): Three vertical carbon steel vessels (1m dia, 4.5m H, 14mm thick). Contain a 15 cm catalyst layer on trays to bleach raw liquids into high-quality compounds, collected in a bottom horizontal tank. The catalyst is a calcined mixture of Bentonite and Zinc Oxide granules (2-3 mm) homogenized in water, which can be reactivated with steam and 5% HCl. • 9-3: Supporting Pumps: Vacuum pumps (VP-04A/B) at 5.5 kW extract vapors to the scrubber. Centrifugal pumps (P-09A/B) at 7.5 kW push bleached liquids to final tanks. 10. Production Tanks (V-13 A-F & V-18 A-C) • Light Products: Six horizontal carbon steel tanks (2.8m dia, 9m L, 55-ton capacity). V-13A/B for light naphtha, V-13C/D for Gas Oil, V-13E/F for diesel. • Asphalt: Three vertical carbon steel tanks (V-18A/B/C) (5m dia, 9m H). Equipped with thermal oil heating coils to keep asphalt liquid. Fully insulated (90 kg/m³ glass wool, 1.8mm aluminum cover). 11. Supporting Systems • 11-1: Gas Washing (Scrubber) System: Treats non-condensable gases before atmospheric release. Contains V-14 washing tank (1m dia, 2.8m L), a 500mm Flare stack with 3 ignitors, and a 1m x 1m LPG tank (V-15) for ignition. • 11-2: Cooling Tower: Provides cooling water for heat exchangers. Galvanized pressed steel basin (16m L x 2.4m W x 2.8m H), FRP casing, top fans, water distributors, and fill media. Includes Accumulator tank V-20 (1.5m dia, 2m L) and 11 kW pushing pumps (P-14A/B). • 11-3: Thermal Oil Boilers: Includes oil tank, heating boiler, oil pumps, and heating accelerators. • 11-4: Distillation Tower Raw Boilers • 11-5: Power Generation System • 11-6: Production Laboratory • 11-7: Control and Operation Room • 11-8: Catalyst System: Contains a vertical diesel tank (1m dia, 1.5m H) with a 1 kW centrifugal pump (P-11). Two vertical carbon steel tanks (V-17A/B, 1.5m dia, 4.5m H) with an MX-03 hydromotor mixer (7.5 kW, 30 RPM). V-17A is for preparation, V-17B pumps catalyst to the reactor. ________________________________________ Catalyst Chemical Components & Formulations 1. Alumina (Al2O3): Enhances the cracking of chemical bonds in heavy bitumen chains and increases Gas Oil extraction yield. 2. Manganese Dioxide (MnO2): Accelerates the reaction, reduces reaction time, and acts as a gasoline improver. 3. Silicon Dioxide (SiO2): Increases acceleration and reduces reaction time. 4. Iron Oxides (Fe2O): Accelerates the reaction, prevents pipe corrosion, and stops sulfur and wax from sticking to pipes and pumps. Weight Ratios (WT/WT) to Produce One Barrel (200 Liters) of Catalyst: 1. Alumina: Varies by feed: 2-2.5% for Bitumen / 4-5% for Vacuum Residue (VR) / 2-2.5% for Heavy Fuel Oil (HFO). To increase Gas Oil/Diesel (Light fuel) yield, Alumina can be added up to a maximum of 10%. 2. Manganese Dioxide: 2-2.5% for HFO / 4-5% for VR and Bitumen. 3. Iron Oxides: 2-2.5% across all feeds. 4. Silicon Dioxide: 2-2.5% for HFO / 4-5% for Bitumen and VR. 5. Remaining Volume: Filled with C-oil. Note: One barrel (200 Liters) of this mixture is added for every 5 tons of HFO, VR, or Bitumen. Manufacturing Mechanism: All components are placed in a tank, initially mixed with water, and heated to 80-120°C with continuous mixing (20-30 RPM). Once foam is generated, the product is allowed to cool to 80°C. The heating process up to 120°C is repeated 3 or 4 times until foaming ceases. Finally, the temperature is raised to 150°C, and the mixture is topped off to 200 liters using C-oil. To further improve light compound specifications, Zinc Oxide (300 grams) is mixed with 20 kg of Bentonite in C-oil. This is added alongside the catalyst at a ratio of 1/5 barrel of catalyst added to the reactor.
012
Hero
Specialized Bitumen Refining Plant Governorate: Anbar / Hit District Production Capacity: ( ) Tons/Day The city of Hit in the Anbar Governorate is considered one of the most famous areas in the world for its natural "bitumen springs," which have been used for thousands of years (dating back to the Babylonian and Assyrian eras). However, processing this bitumen for modern use requires technical steps to transform it from a raw material into a viable product for construction or industrial applications. Bitumen emerges from these springs as a highly viscous liquid mixed with sulfurous water, salts, and mud impurities. This "Natural Asphalt" differs from petroleum bitumen produced in refineries, and it can also appear in the form of rocky or spongy blocks mixed with mud. To obtain industrially usable products from this bitumen, specifically for: 1. Waterproofing (Felt/Membranes): Considered one of the best coating materials for building foundations to prevent moisture leakage due to its high resistance to hydrolysis. 2. Road Paving: Mixed with gravel and sand to produce asphalt concrete. It is characterized by exceptionally high cohesive strength compared to industrial bitumen. The natural bitumen from these springs must undergo several fundamental processing stages to become industrially viable: 1. Collection and Sedimentation: Bitumen is collected from the springs or quarry sites and left in designated basins to allow the sulfurous water to naturally separate (due to density differences). 2. Primary Heating: The raw bitumen is placed in large boilers to: a. Evaporate the remaining water. b. Reduce viscosity for easier handling. 3. Filtration and Purification: The heated bitumen is screened to remove solid impurities such as gravel, dirt, and suspended organic matter. 4. Secondary Heating and Cooking: The temperature of the bitumen is raised, improving agents are added, and it is prepared for the vacuum distillation process. 5. Vacuum Distillation: The distillation process is conducted under low pressure (vacuum pressure), which allows for: a. The separation of light oils and volatile substances at lower temperatures. b. The production of highly pure "Hard Asphalt," which is highly demanded in the construction industry. ________________________________________ Plant Components and Operational Stages The specialized bitumen plant for processing raw natural bitumen (in both liquid and solid states) consists of a range of specialized equipment designed according to the latest international standards. This equipment aligns with the technical and engineering requirements for bitumen products, complies with Iraqi standard specifications, and adheres to environmental considerations in the Anbar Governorate. 1. Extraction Stage The raw material (solid or liquid) is extracted from quarries designated by the Geological Survey Authority using specialized mechanical equipment. It is stored in stocks or special basins for solid materials, then transported to the refinery site using specialized transport vehicles of various capacities. 2. Storage Stage The raw materials are stored in designated yards to ensure a sufficient inventory for continuous, uninterrupted production for no less than 7 working days. 3. Raw Material Preparation and Primary Heating Stage Raw materials are fed into the plant via hydraulic lifts. This stage includes: • 3-1: Crushing and Digestion: Solid raw materials from the quarries are broken down and digested using a digester (SH-01) equipped with double blades driven by hydraulic motors (22.5 kW capacity). The digester is 5 meters long and 1.80 meters in diameter, made of carbon steel, with Stainless Steel 304 blades. It includes a Stainless Steel piston driven by a 7.5 kW electric motor. • 3-2: Primary Heating: This melts the bitumen and improves pumpability through pipes and pumps. • 3-3: Efficiency Enhancement: To increase melting efficiency, Gas Oil is added to the primary heating basin at a ratio of 1:5 per ton of solid raw material entering the basin (this ratio decreases when using liquid raw bitumen). o 3-2-1: Primary Melting Basin (TK-01): Raw material is heated in a concrete tank (25m L x 5m W x 3m H) with a maximum storage capacity of 300 tons. Heating pipes circulate thermal fluid (oil) at 125°C, with a retention time of 4-6 hours. The tank is internally lined with 6-8 mm carbon steel plates to protect the heating pipes from corrosion. It contains 8 Stainless Steel 304 mixers (MX-01 A/B/C/D/E/F) driven by 7.5 kW electric motors (50 RPM) and gearboxes (1:60 ratio) to mix the material, increase heating efficiency, reduce retention time, and circulate the melted bitumen to eliminate dissolved water, resulting in a homogeneous melt. Covered with a carbon steel roof with service hatches, it connects to an air duct (30x60 cm) linked to 2 air blowers (AB-01A/B) (one operating, one standby) at 22.5 kW / 1500 RPM. These extract water vapor and sulfur fumes, sending them to a scrubber before atmospheric release and water recycling. o 3-2-2: Primary Collection Tank (V-01): A carbon steel tank (12-14 mm thick) with a maximum capacity of 125 tons (10m L x 5m W x 3m H). It connects directly to the primary tank (TK-01) via channels and movable gates to receive only liquid raw material. It contains thermal oil pipes to maintain the liquid raw material at 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum outer cover. Impurities larger than 35 mm are removed and collected in a waste tank. o 3-2-3: Screw Conveyors (SC-01 A/B): Carbon steel screw conveyors with a double-jacketed outer cover filled with thermal oil to maintain the 140°C temperature. Driven by 22.5 kW electric motors (3000 RPM) with 1:40 gearboxes, they transport the liquid raw material to the preliminary filtration unit. 4. Purification Unit Removes suspended impurities from the liquid raw material in two stages: • 4-1: Preliminary Purification Tank (V-02): A carbon steel tank (12-14 mm thick, 125-ton capacity, 5m L x 10m W x 3m H). Receives liquid raw material from the primary collection tank. Contains thermal oil pipes to maintain 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Impurities larger than 15 mm are removed to a waste tank. Material is pumped to the final filtration stage via gear pumps (GP-01 A/B) (one operating, one standby) at 22.5 kW / 1000 RPM. • 4-2: Final Filtration Unit (FT-01): Removes remaining impurities by passing liquids through box filters arranged in 2 trains (8 per train). They feature a two-layer Stainless Steel filter mesh (specified microns) wrapped around square boxes. Liquid enters from the outside, and pure liquid is collected from the inside via a pipe network connected to a manifold. This is driven by two vacuum pumps (VP-01A/B) connected to the raw material tanks. 5. Raw Material Tanks (V-03 A-J) Ten carbon steel tanks (2.5m diameter, 9m length, 14 mm thickness, 45-ton max capacity) equipped with thermal oil heating coils. They receive, store, and prepare the purified raw material for the subsequent cooking reaction. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Connected by a pipe/valve network, the material is pumped via two centrifugal pumps (P-01 A/B) at 22.5 kW / 3000 RPM to the reactor unit. The tanks connect to a pipe network driven by vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM, pushing heating gases and vapors to the gas washing tank (V-14). 6. Reactor (Cooking) Unit (V-04 A/B) Consists of three reactors (55 tons each) that prepare the raw material for vacuum distillation and extract light naphtha compounds. • 6-1: Cooking Process: o 6-1-1: Catalyst System: Consists of two tanks. One prepares the catalyst mixture (1.5m dia, 4m H, 8mm carbon steel) with a mixer (MX-03) driven by a hydromotor and 1:40 gearbox. The second stores Gas Oil added to the preparation unit (1.5m dia, 1m H, 5mm carbon steel) with a 0.5 HP centrifugal pump. o 6-1-2: Reaction Tanks (V-04/05/06A): Three carbon steel tanks (2.8m dia, 9m L, 14mm thick, 55-ton max). Each has 2 Stainless Steel mixers (MX-02 A/B/C/D/E/F) driven by a 7.5 kW motor (1500 RPM) with a 1:40 gearbox. Contains an internal heating system powered by a Gas Oil burner to raise the temperature to 180°C. Catalyst is injected via dosing pumps (DP-01A/B) to increase naphtha extraction efficiency. Material is circulated during cooking by two centrifugal pumps per reactor (P-04A/B/C/D/E/F) (one active, one standby) to reduce retention time to 3-4 hours. After cooking, material is moved to the attached tank (V-04/05/06B) for storage before distillation. Fully insulated. o 6-1-3: Cooked Material Tank (V-04/05/06B): Carbon steel tank (2.8m dia, 9m L, 14mm thick) with thermal oil pipes to maintain 190-200°C. Fully insulated. Material is pumped to the vacuum distillation tower via centrifugal pumps (P-05A/B) (one active, one standby) at 22.5 kW / 3000 RPM. 7. Raw Naphtha Storage Unit Collects and condenses naphtha extracted during cooking. • 7-1-1: Raw Naphtha Tanks (V-07A/B/C): Three vertical Stainless Steel 304 tanks (1.5m dia, 5m H) connected to three heat exchangers and two pump pairs. Equipped internally with water spray nozzles on a ring pipe to wash non-condensable gases. • 7-1-2: Heat Exchangers (HE-01A/B/C): Condense naphtha vapors from 140°C down to 40°C using water from the cooling tower. Connected in series. Shell & Tube type, carbon steel (510 mm dia, 6m L) with 70 tubes (0.75-inch dia) in two rows of 35. Includes internal baffles for efficiency. • 7-1-3: Supporting Pumps: Vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM draw naphtha vapors from reactors to the heat exchangers, pushing non-condensable gases to the scrubber (V-14). Centrifugal pumps (P-02A/B) at 11.5 kW / 1500 RPM transport liquid raw naphtha to the Bleaching Unit. 8. Vacuum Distillation Unit The core of the plant, separating remaining light compounds and producing hard asphalt. • 8-1-1: Vacuum Distillation Tower: A vertical tower (~16m total height, 14mm carbon steel). Bottom section (Reboiler) is 3.5m dia x 1.2m H; top section is 1.5m dia x 12m H. Fully insulated. Fed with cooked material at 190-200°C via pumps (P-05A/B). To start extraction (remaining naphtha, Gas Oil, diesel), temperature is raised to 240-250°C using Heating Coil 1 via pumps (P-08A/B) at 55 kW / 3000 RPM, with continuous circulation via pumps (P-07A/B). Vacuum pumps (VP-03A/B) maintain 0.3-0.5 mbar pressure. Light compounds are extracted, condensed (HE-02A/B/C), and stored (V-08/09/10 A/B) over 2.5-3 hours. Afterward, material is heated via Heating Coil 2 to 320-340°C to finalize extraction and produce hard bitumen. Product is extracted via pumps (P-07A/B) at ~320°C, cooled via cooling tower coils, and sent to final tanks (V-18A/B/C). Batch processing takes 6-7 hours daily; continuous operation is possible. • 8-1-2: Supporting Pumps: Vacuum pumps (VP-03A/B) at 5.5 kW / 3000 RPM draw light vapors for condensation. Circulation centrifugal pumps (P-08A/B) at 55 kW move hot material to heating coils; (P-07A/B) circulate material and pump final bitumen product. • 8-1-3: Heating Coils 1 & 2: Carbon steel 4-inch diameter coils heated externally by a Gas Oil burner. Connected in series to heat liquid bitumen in two stages to prevent degradation. • 8-2: Heat Exchangers (HE-02A/B/C): Condense light compound vapors from 240°C to 40°C. Shell & Tube type, carbon steel (600 mm dia, 6m L) with 80 tubes (1-inch dia) in two rows of 40, equipped with baffles. • 8-3: Light Compound Tanks (V-08A/B, V-09A/B, V-10A/B): Six horizontal carbon steel tanks (1.5m dia, 4.5m L, 14mm thick). Receive condensates, linked to heat exchangers and vacuum pumps. Liquids are pumped to the Bleaching Unit via centrifugal pumps (P-06A/B) at 7.5 kW / 1500 RPM. 9. Bleaching Unit Improves the specifications of raw light compounds for local use and marketing. • 9-1: Collection Tank (V-11): Horizontal carbon steel tank (1m dia, 2.5m L, 14mm thick) placed above the system to store and distribute light compounds to the bleaching columns. • 9-2: Bleaching Columns (V-12A/B/C): Three vertical carbon steel vessels (1m dia, 4.5m H, 14mm thick). Contain a 15 cm catalyst layer on trays to bleach raw liquids into high-quality compounds, collected in a bottom horizontal tank. The catalyst is a calcined mixture of Bentonite and Zinc Oxide granules (2-3 mm) homogenized in water, which can be reactivated with steam and 5% HCl. • 9-3: Supporting Pumps: Vacuum pumps (VP-04A/B) at 5.5 kW extract vapors to the scrubber. Centrifugal pumps (P-09A/B) at 7.5 kW push bleached liquids to final tanks. 10. Production Tanks (V-13 A-F & V-18 A-C) • Light Products: Six horizontal carbon steel tanks (2.8m dia, 9m L, 55-ton capacity). V-13A/B for light naphtha, V-13C/D for Gas Oil, V-13E/F for diesel. • Asphalt: Three vertical carbon steel tanks (V-18A/B/C) (5m dia, 9m H). Equipped with thermal oil heating coils to keep asphalt liquid. Fully insulated (90 kg/m³ glass wool, 1.8mm aluminum cover). 11. Supporting Systems • 11-1: Gas Washing (Scrubber) System: Treats non-condensable gases before atmospheric release. Contains V-14 washing tank (1m dia, 2.8m L), a 500mm Flare stack with 3 ignitors, and a 1m x 1m LPG tank (V-15) for ignition. • 11-2: Cooling Tower: Provides cooling water for heat exchangers. Galvanized pressed steel basin (16m L x 2.4m W x 2.8m H), FRP casing, top fans, water distributors, and fill media. Includes Accumulator tank V-20 (1.5m dia, 2m L) and 11 kW pushing pumps (P-14A/B). • 11-3: Thermal Oil Boilers: Includes oil tank, heating boiler, oil pumps, and heating accelerators. • 11-4: Distillation Tower Raw Boilers • 11-5: Power Generation System • 11-6: Production Laboratory • 11-7: Control and Operation Room • 11-8: Catalyst System: Contains a vertical diesel tank (1m dia, 1.5m H) with a 1 kW centrifugal pump (P-11). Two vertical carbon steel tanks (V-17A/B, 1.5m dia, 4.5m H) with an MX-03 hydromotor mixer (7.5 kW, 30 RPM). V-17A is for preparation, V-17B pumps catalyst to the reactor. ________________________________________ Catalyst Chemical Components & Formulations 1. Alumina (Al2O3): Enhances the cracking of chemical bonds in heavy bitumen chains and increases Gas Oil extraction yield. 2. Manganese Dioxide (MnO2): Accelerates the reaction, reduces reaction time, and acts as a gasoline improver. 3. Silicon Dioxide (SiO2): Increases acceleration and reduces reaction time. 4. Iron Oxides (Fe2O): Accelerates the reaction, prevents pipe corrosion, and stops sulfur and wax from sticking to pipes and pumps. Weight Ratios (WT/WT) to Produce One Barrel (200 Liters) of Catalyst: 1. Alumina: Varies by feed: 2-2.5% for Bitumen / 4-5% for Vacuum Residue (VR) / 2-2.5% for Heavy Fuel Oil (HFO). To increase Gas Oil/Diesel (Light fuel) yield, Alumina can be added up to a maximum of 10%. 2. Manganese Dioxide: 2-2.5% for HFO / 4-5% for VR and Bitumen. 3. Iron Oxides: 2-2.5% across all feeds. 4. Silicon Dioxide: 2-2.5% for HFO / 4-5% for Bitumen and VR. 5. Remaining Volume: Filled with C-oil. Note: One barrel (200 Liters) of this mixture is added for every 5 tons of HFO, VR, or Bitumen. Manufacturing Mechanism: All components are placed in a tank, initially mixed with water, and heated to 80-120°C with continuous mixing (20-30 RPM). Once foam is generated, the product is allowed to cool to 80°C. The heating process up to 120°C is repeated 3 or 4 times until foaming ceases. Finally, the temperature is raised to 150°C, and the mixture is topped off to 200 liters using C-oil. To further improve light compound specifications, Zinc Oxide (300 grams) is mixed with 20 kg of Bentonite in C-oil. This is added alongside the catalyst at a ratio of 1/5 barrel of catalyst added to the reactor.
019
Hero
Specialized Bitumen Refining Plant Governorate: Anbar / Hit District Production Capacity: ( ) Tons/Day The city of Hit in the Anbar Governorate is considered one of the most famous areas in the world for its natural "bitumen springs," which have been used for thousands of years (dating back to the Babylonian and Assyrian eras). However, processing this bitumen for modern use requires technical steps to transform it from a raw material into a viable product for construction or industrial applications. Bitumen emerges from these springs as a highly viscous liquid mixed with sulfurous water, salts, and mud impurities. This "Natural Asphalt" differs from petroleum bitumen produced in refineries, and it can also appear in the form of rocky or spongy blocks mixed with mud. To obtain industrially usable products from this bitumen, specifically for: 1. Waterproofing (Felt/Membranes): Considered one of the best coating materials for building foundations to prevent moisture leakage due to its high resistance to hydrolysis. 2. Road Paving: Mixed with gravel and sand to produce asphalt concrete. It is characterized by exceptionally high cohesive strength compared to industrial bitumen. The natural bitumen from these springs must undergo several fundamental processing stages to become industrially viable: 1. Collection and Sedimentation: Bitumen is collected from the springs or quarry sites and left in designated basins to allow the sulfurous water to naturally separate (due to density differences). 2. Primary Heating: The raw bitumen is placed in large boilers to: a. Evaporate the remaining water. b. Reduce viscosity for easier handling. 3. Filtration and Purification: The heated bitumen is screened to remove solid impurities such as gravel, dirt, and suspended organic matter. 4. Secondary Heating and Cooking: The temperature of the bitumen is raised, improving agents are added, and it is prepared for the vacuum distillation process. 5. Vacuum Distillation: The distillation process is conducted under low pressure (vacuum pressure), which allows for: a. The separation of light oils and volatile substances at lower temperatures. b. The production of highly pure "Hard Asphalt," which is highly demanded in the construction industry. ________________________________________ Plant Components and Operational Stages The specialized bitumen plant for processing raw natural bitumen (in both liquid and solid states) consists of a range of specialized equipment designed according to the latest international standards. This equipment aligns with the technical and engineering requirements for bitumen products, complies with Iraqi standard specifications, and adheres to environmental considerations in the Anbar Governorate. 1. Extraction Stage The raw material (solid or liquid) is extracted from quarries designated by the Geological Survey Authority using specialized mechanical equipment. It is stored in stocks or special basins for solid materials, then transported to the refinery site using specialized transport vehicles of various capacities. 2. Storage Stage The raw materials are stored in designated yards to ensure a sufficient inventory for continuous, uninterrupted production for no less than 7 working days. 3. Raw Material Preparation and Primary Heating Stage Raw materials are fed into the plant via hydraulic lifts. This stage includes: • 3-1: Crushing and Digestion: Solid raw materials from the quarries are broken down and digested using a digester (SH-01) equipped with double blades driven by hydraulic motors (22.5 kW capacity). The digester is 5 meters long and 1.80 meters in diameter, made of carbon steel, with Stainless Steel 304 blades. It includes a Stainless Steel piston driven by a 7.5 kW electric motor. • 3-2: Primary Heating: This melts the bitumen and improves pumpability through pipes and pumps. • 3-3: Efficiency Enhancement: To increase melting efficiency, Gas Oil is added to the primary heating basin at a ratio of 1:5 per ton of solid raw material entering the basin (this ratio decreases when using liquid raw bitumen). o 3-2-1: Primary Melting Basin (TK-01): Raw material is heated in a concrete tank (25m L x 5m W x 3m H) with a maximum storage capacity of 300 tons. Heating pipes circulate thermal fluid (oil) at 125°C, with a retention time of 4-6 hours. The tank is internally lined with 6-8 mm carbon steel plates to protect the heating pipes from corrosion. It contains 8 Stainless Steel 304 mixers (MX-01 A/B/C/D/E/F) driven by 7.5 kW electric motors (50 RPM) and gearboxes (1:60 ratio) to mix the material, increase heating efficiency, reduce retention time, and circulate the melted bitumen to eliminate dissolved water, resulting in a homogeneous melt. Covered with a carbon steel roof with service hatches, it connects to an air duct (30x60 cm) linked to 2 air blowers (AB-01A/B) (one operating, one standby) at 22.5 kW / 1500 RPM. These extract water vapor and sulfur fumes, sending them to a scrubber before atmospheric release and water recycling. o 3-2-2: Primary Collection Tank (V-01): A carbon steel tank (12-14 mm thick) with a maximum capacity of 125 tons (10m L x 5m W x 3m H). It connects directly to the primary tank (TK-01) via channels and movable gates to receive only liquid raw material. It contains thermal oil pipes to maintain the liquid raw material at 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum outer cover. Impurities larger than 35 mm are removed and collected in a waste tank. o 3-2-3: Screw Conveyors (SC-01 A/B): Carbon steel screw conveyors with a double-jacketed outer cover filled with thermal oil to maintain the 140°C temperature. Driven by 22.5 kW electric motors (3000 RPM) with 1:40 gearboxes, they transport the liquid raw material to the preliminary filtration unit. 4. Purification Unit Removes suspended impurities from the liquid raw material in two stages: • 4-1: Preliminary Purification Tank (V-02): A carbon steel tank (12-14 mm thick, 125-ton capacity, 5m L x 10m W x 3m H). Receives liquid raw material from the primary collection tank. Contains thermal oil pipes to maintain 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Impurities larger than 15 mm are removed to a waste tank. Material is pumped to the final filtration stage via gear pumps (GP-01 A/B) (one operating, one standby) at 22.5 kW / 1000 RPM. • 4-2: Final Filtration Unit (FT-01): Removes remaining impurities by passing liquids through box filters arranged in 2 trains (8 per train). They feature a two-layer Stainless Steel filter mesh (specified microns) wrapped around square boxes. Liquid enters from the outside, and pure liquid is collected from the inside via a pipe network connected to a manifold. This is driven by two vacuum pumps (VP-01A/B) connected to the raw material tanks. 5. Raw Material Tanks (V-03 A-J) Ten carbon steel tanks (2.5m diameter, 9m length, 14 mm thickness, 45-ton max capacity) equipped with thermal oil heating coils. They receive, store, and prepare the purified raw material for the subsequent cooking reaction. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Connected by a pipe/valve network, the material is pumped via two centrifugal pumps (P-01 A/B) at 22.5 kW / 3000 RPM to the reactor unit. The tanks connect to a pipe network driven by vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM, pushing heating gases and vapors to the gas washing tank (V-14). 6. Reactor (Cooking) Unit (V-04 A/B) Consists of three reactors (55 tons each) that prepare the raw material for vacuum distillation and extract light naphtha compounds. • 6-1: Cooking Process: o 6-1-1: Catalyst System: Consists of two tanks. One prepares the catalyst mixture (1.5m dia, 4m H, 8mm carbon steel) with a mixer (MX-03) driven by a hydromotor and 1:40 gearbox. The second stores Gas Oil added to the preparation unit (1.5m dia, 1m H, 5mm carbon steel) with a 0.5 HP centrifugal pump. o 6-1-2: Reaction Tanks (V-04/05/06A): Three carbon steel tanks (2.8m dia, 9m L, 14mm thick, 55-ton max). Each has 2 Stainless Steel mixers (MX-02 A/B/C/D/E/F) driven by a 7.5 kW motor (1500 RPM) with a 1:40 gearbox. Contains an internal heating system powered by a Gas Oil burner to raise the temperature to 180°C. Catalyst is injected via dosing pumps (DP-01A/B) to increase naphtha extraction efficiency. Material is circulated during cooking by two centrifugal pumps per reactor (P-04A/B/C/D/E/F) (one active, one standby) to reduce retention time to 3-4 hours. After cooking, material is moved to the attached tank (V-04/05/06B) for storage before distillation. Fully insulated. o 6-1-3: Cooked Material Tank (V-04/05/06B): Carbon steel tank (2.8m dia, 9m L, 14mm thick) with thermal oil pipes to maintain 190-200°C. Fully insulated. Material is pumped to the vacuum distillation tower via centrifugal pumps (P-05A/B) (one active, one standby) at 22.5 kW / 3000 RPM. 7. Raw Naphtha Storage Unit Collects and condenses naphtha extracted during cooking. • 7-1-1: Raw Naphtha Tanks (V-07A/B/C): Three vertical Stainless Steel 304 tanks (1.5m dia, 5m H) connected to three heat exchangers and two pump pairs. Equipped internally with water spray nozzles on a ring pipe to wash non-condensable gases. • 7-1-2: Heat Exchangers (HE-01A/B/C): Condense naphtha vapors from 140°C down to 40°C using water from the cooling tower. Connected in series. Shell & Tube type, carbon steel (510 mm dia, 6m L) with 70 tubes (0.75-inch dia) in two rows of 35. Includes internal baffles for efficiency. • 7-1-3: Supporting Pumps: Vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM draw naphtha vapors from reactors to the heat exchangers, pushing non-condensable gases to the scrubber (V-14). Centrifugal pumps (P-02A/B) at 11.5 kW / 1500 RPM transport liquid raw naphtha to the Bleaching Unit. 8. Vacuum Distillation Unit The core of the plant, separating remaining light compounds and producing hard asphalt. • 8-1-1: Vacuum Distillation Tower: A vertical tower (~16m total height, 14mm carbon steel). Bottom section (Reboiler) is 3.5m dia x 1.2m H; top section is 1.5m dia x 12m H. Fully insulated. Fed with cooked material at 190-200°C via pumps (P-05A/B). To start extraction (remaining naphtha, Gas Oil, diesel), temperature is raised to 240-250°C using Heating Coil 1 via pumps (P-08A/B) at 55 kW / 3000 RPM, with continuous circulation via pumps (P-07A/B). Vacuum pumps (VP-03A/B) maintain 0.3-0.5 mbar pressure. Light compounds are extracted, condensed (HE-02A/B/C), and stored (V-08/09/10 A/B) over 2.5-3 hours. Afterward, material is heated via Heating Coil 2 to 320-340°C to finalize extraction and produce hard bitumen. Product is extracted via pumps (P-07A/B) at ~320°C, cooled via cooling tower coils, and sent to final tanks (V-18A/B/C). Batch processing takes 6-7 hours daily; continuous operation is possible. • 8-1-2: Supporting Pumps: Vacuum pumps (VP-03A/B) at 5.5 kW / 3000 RPM draw light vapors for condensation. Circulation centrifugal pumps (P-08A/B) at 55 kW move hot material to heating coils; (P-07A/B) circulate material and pump final bitumen product. • 8-1-3: Heating Coils 1 & 2: Carbon steel 4-inch diameter coils heated externally by a Gas Oil burner. Connected in series to heat liquid bitumen in two stages to prevent degradation. • 8-2: Heat Exchangers (HE-02A/B/C): Condense light compound vapors from 240°C to 40°C. Shell & Tube type, carbon steel (600 mm dia, 6m L) with 80 tubes (1-inch dia) in two rows of 40, equipped with baffles. • 8-3: Light Compound Tanks (V-08A/B, V-09A/B, V-10A/B): Six horizontal carbon steel tanks (1.5m dia, 4.5m L, 14mm thick). Receive condensates, linked to heat exchangers and vacuum pumps. Liquids are pumped to the Bleaching Unit via centrifugal pumps (P-06A/B) at 7.5 kW / 1500 RPM. 9. Bleaching Unit Improves the specifications of raw light compounds for local use and marketing. • 9-1: Collection Tank (V-11): Horizontal carbon steel tank (1m dia, 2.5m L, 14mm thick) placed above the system to store and distribute light compounds to the bleaching columns. • 9-2: Bleaching Columns (V-12A/B/C): Three vertical carbon steel vessels (1m dia, 4.5m H, 14mm thick). Contain a 15 cm catalyst layer on trays to bleach raw liquids into high-quality compounds, collected in a bottom horizontal tank. The catalyst is a calcined mixture of Bentonite and Zinc Oxide granules (2-3 mm) homogenized in water, which can be reactivated with steam and 5% HCl. • 9-3: Supporting Pumps: Vacuum pumps (VP-04A/B) at 5.5 kW extract vapors to the scrubber. Centrifugal pumps (P-09A/B) at 7.5 kW push bleached liquids to final tanks. 10. Production Tanks (V-13 A-F & V-18 A-C) • Light Products: Six horizontal carbon steel tanks (2.8m dia, 9m L, 55-ton capacity). V-13A/B for light naphtha, V-13C/D for Gas Oil, V-13E/F for diesel. • Asphalt: Three vertical carbon steel tanks (V-18A/B/C) (5m dia, 9m H). Equipped with thermal oil heating coils to keep asphalt liquid. Fully insulated (90 kg/m³ glass wool, 1.8mm aluminum cover). 11. Supporting Systems • 11-1: Gas Washing (Scrubber) System: Treats non-condensable gases before atmospheric release. Contains V-14 washing tank (1m dia, 2.8m L), a 500mm Flare stack with 3 ignitors, and a 1m x 1m LPG tank (V-15) for ignition. • 11-2: Cooling Tower: Provides cooling water for heat exchangers. Galvanized pressed steel basin (16m L x 2.4m W x 2.8m H), FRP casing, top fans, water distributors, and fill media. Includes Accumulator tank V-20 (1.5m dia, 2m L) and 11 kW pushing pumps (P-14A/B). • 11-3: Thermal Oil Boilers: Includes oil tank, heating boiler, oil pumps, and heating accelerators. • 11-4: Distillation Tower Raw Boilers • 11-5: Power Generation System • 11-6: Production Laboratory • 11-7: Control and Operation Room • 11-8: Catalyst System: Contains a vertical diesel tank (1m dia, 1.5m H) with a 1 kW centrifugal pump (P-11). Two vertical carbon steel tanks (V-17A/B, 1.5m dia, 4.5m H) with an MX-03 hydromotor mixer (7.5 kW, 30 RPM). V-17A is for preparation, V-17B pumps catalyst to the reactor. ________________________________________ Catalyst Chemical Components & Formulations 1. Alumina (Al2O3): Enhances the cracking of chemical bonds in heavy bitumen chains and increases Gas Oil extraction yield. 2. Manganese Dioxide (MnO2): Accelerates the reaction, reduces reaction time, and acts as a gasoline improver. 3. Silicon Dioxide (SiO2): Increases acceleration and reduces reaction time. 4. Iron Oxides (Fe2O): Accelerates the reaction, prevents pipe corrosion, and stops sulfur and wax from sticking to pipes and pumps. Weight Ratios (WT/WT) to Produce One Barrel (200 Liters) of Catalyst: 1. Alumina: Varies by feed: 2-2.5% for Bitumen / 4-5% for Vacuum Residue (VR) / 2-2.5% for Heavy Fuel Oil (HFO). To increase Gas Oil/Diesel (Light fuel) yield, Alumina can be added up to a maximum of 10%. 2. Manganese Dioxide: 2-2.5% for HFO / 4-5% for VR and Bitumen. 3. Iron Oxides: 2-2.5% across all feeds. 4. Silicon Dioxide: 2-2.5% for HFO / 4-5% for Bitumen and VR. 5. Remaining Volume: Filled with C-oil. Note: One barrel (200 Liters) of this mixture is added for every 5 tons of HFO, VR, or Bitumen. Manufacturing Mechanism: All components are placed in a tank, initially mixed with water, and heated to 80-120°C with continuous mixing (20-30 RPM). Once foam is generated, the product is allowed to cool to 80°C. The heating process up to 120°C is repeated 3 or 4 times until foaming ceases. Finally, the temperature is raised to 150°C, and the mixture is topped off to 200 liters using C-oil. To further improve light compound specifications, Zinc Oxide (300 grams) is mixed with 20 kg of Bentonite in C-oil. This is added alongside the catalyst at a ratio of 1/5 barrel of catalyst added to the reactor.
010
Hero
Specialized Bitumen Refining Plant Governorate: Anbar / Hit District Production Capacity: ( ) Tons/Day The city of Hit in the Anbar Governorate is considered one of the most famous areas in the world for its natural "bitumen springs," which have been used for thousands of years (dating back to the Babylonian and Assyrian eras). However, processing this bitumen for modern use requires technical steps to transform it from a raw material into a viable product for construction or industrial applications. Bitumen emerges from these springs as a highly viscous liquid mixed with sulfurous water, salts, and mud impurities. This "Natural Asphalt" differs from petroleum bitumen produced in refineries, and it can also appear in the form of rocky or spongy blocks mixed with mud. To obtain industrially usable products from this bitumen, specifically for: 1. Waterproofing (Felt/Membranes): Considered one of the best coating materials for building foundations to prevent moisture leakage due to its high resistance to hydrolysis. 2. Road Paving: Mixed with gravel and sand to produce asphalt concrete. It is characterized by exceptionally high cohesive strength compared to industrial bitumen. The natural bitumen from these springs must undergo several fundamental processing stages to become industrially viable: 1. Collection and Sedimentation: Bitumen is collected from the springs or quarry sites and left in designated basins to allow the sulfurous water to naturally separate (due to density differences). 2. Primary Heating: The raw bitumen is placed in large boilers to: a. Evaporate the remaining water. b. Reduce viscosity for easier handling. 3. Filtration and Purification: The heated bitumen is screened to remove solid impurities such as gravel, dirt, and suspended organic matter. 4. Secondary Heating and Cooking: The temperature of the bitumen is raised, improving agents are added, and it is prepared for the vacuum distillation process. 5. Vacuum Distillation: The distillation process is conducted under low pressure (vacuum pressure), which allows for: a. The separation of light oils and volatile substances at lower temperatures. b. The production of highly pure "Hard Asphalt," which is highly demanded in the construction industry. ________________________________________ Plant Components and Operational Stages The specialized bitumen plant for processing raw natural bitumen (in both liquid and solid states) consists of a range of specialized equipment designed according to the latest international standards. This equipment aligns with the technical and engineering requirements for bitumen products, complies with Iraqi standard specifications, and adheres to environmental considerations in the Anbar Governorate. 1. Extraction Stage The raw material (solid or liquid) is extracted from quarries designated by the Geological Survey Authority using specialized mechanical equipment. It is stored in stocks or special basins for solid materials, then transported to the refinery site using specialized transport vehicles of various capacities. 2. Storage Stage The raw materials are stored in designated yards to ensure a sufficient inventory for continuous, uninterrupted production for no less than 7 working days. 3. Raw Material Preparation and Primary Heating Stage Raw materials are fed into the plant via hydraulic lifts. This stage includes: • 3-1: Crushing and Digestion: Solid raw materials from the quarries are broken down and digested using a digester (SH-01) equipped with double blades driven by hydraulic motors (22.5 kW capacity). The digester is 5 meters long and 1.80 meters in diameter, made of carbon steel, with Stainless Steel 304 blades. It includes a Stainless Steel piston driven by a 7.5 kW electric motor. • 3-2: Primary Heating: This melts the bitumen and improves pumpability through pipes and pumps. • 3-3: Efficiency Enhancement: To increase melting efficiency, Gas Oil is added to the primary heating basin at a ratio of 1:5 per ton of solid raw material entering the basin (this ratio decreases when using liquid raw bitumen). o 3-2-1: Primary Melting Basin (TK-01): Raw material is heated in a concrete tank (25m L x 5m W x 3m H) with a maximum storage capacity of 300 tons. Heating pipes circulate thermal fluid (oil) at 125°C, with a retention time of 4-6 hours. The tank is internally lined with 6-8 mm carbon steel plates to protect the heating pipes from corrosion. It contains 8 Stainless Steel 304 mixers (MX-01 A/B/C/D/E/F) driven by 7.5 kW electric motors (50 RPM) and gearboxes (1:60 ratio) to mix the material, increase heating efficiency, reduce retention time, and circulate the melted bitumen to eliminate dissolved water, resulting in a homogeneous melt. Covered with a carbon steel roof with service hatches, it connects to an air duct (30x60 cm) linked to 2 air blowers (AB-01A/B) (one operating, one standby) at 22.5 kW / 1500 RPM. These extract water vapor and sulfur fumes, sending them to a scrubber before atmospheric release and water recycling. o 3-2-2: Primary Collection Tank (V-01): A carbon steel tank (12-14 mm thick) with a maximum capacity of 125 tons (10m L x 5m W x 3m H). It connects directly to the primary tank (TK-01) via channels and movable gates to receive only liquid raw material. It contains thermal oil pipes to maintain the liquid raw material at 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum outer cover. Impurities larger than 35 mm are removed and collected in a waste tank. o 3-2-3: Screw Conveyors (SC-01 A/B): Carbon steel screw conveyors with a double-jacketed outer cover filled with thermal oil to maintain the 140°C temperature. Driven by 22.5 kW electric motors (3000 RPM) with 1:40 gearboxes, they transport the liquid raw material to the preliminary filtration unit. 4. Purification Unit Removes suspended impurities from the liquid raw material in two stages: • 4-1: Preliminary Purification Tank (V-02): A carbon steel tank (12-14 mm thick, 125-ton capacity, 5m L x 10m W x 3m H). Receives liquid raw material from the primary collection tank. Contains thermal oil pipes to maintain 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Impurities larger than 15 mm are removed to a waste tank. Material is pumped to the final filtration stage via gear pumps (GP-01 A/B) (one operating, one standby) at 22.5 kW / 1000 RPM. • 4-2: Final Filtration Unit (FT-01): Removes remaining impurities by passing liquids through box filters arranged in 2 trains (8 per train). They feature a two-layer Stainless Steel filter mesh (specified microns) wrapped around square boxes. Liquid enters from the outside, and pure liquid is collected from the inside via a pipe network connected to a manifold. This is driven by two vacuum pumps (VP-01A/B) connected to the raw material tanks. 5. Raw Material Tanks (V-03 A-J) Ten carbon steel tanks (2.5m diameter, 9m length, 14 mm thickness, 45-ton max capacity) equipped with thermal oil heating coils. They receive, store, and prepare the purified raw material for the subsequent cooking reaction. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Connected by a pipe/valve network, the material is pumped via two centrifugal pumps (P-01 A/B) at 22.5 kW / 3000 RPM to the reactor unit. The tanks connect to a pipe network driven by vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM, pushing heating gases and vapors to the gas washing tank (V-14). 6. Reactor (Cooking) Unit (V-04 A/B) Consists of three reactors (55 tons each) that prepare the raw material for vacuum distillation and extract light naphtha compounds. • 6-1: Cooking Process: o 6-1-1: Catalyst System: Consists of two tanks. One prepares the catalyst mixture (1.5m dia, 4m H, 8mm carbon steel) with a mixer (MX-03) driven by a hydromotor and 1:40 gearbox. The second stores Gas Oil added to the preparation unit (1.5m dia, 1m H, 5mm carbon steel) with a 0.5 HP centrifugal pump. o 6-1-2: Reaction Tanks (V-04/05/06A): Three carbon steel tanks (2.8m dia, 9m L, 14mm thick, 55-ton max). Each has 2 Stainless Steel mixers (MX-02 A/B/C/D/E/F) driven by a 7.5 kW motor (1500 RPM) with a 1:40 gearbox. Contains an internal heating system powered by a Gas Oil burner to raise the temperature to 180°C. Catalyst is injected via dosing pumps (DP-01A/B) to increase naphtha extraction efficiency. Material is circulated during cooking by two centrifugal pumps per reactor (P-04A/B/C/D/E/F) (one active, one standby) to reduce retention time to 3-4 hours. After cooking, material is moved to the attached tank (V-04/05/06B) for storage before distillation. Fully insulated. o 6-1-3: Cooked Material Tank (V-04/05/06B): Carbon steel tank (2.8m dia, 9m L, 14mm thick) with thermal oil pipes to maintain 190-200°C. Fully insulated. Material is pumped to the vacuum distillation tower via centrifugal pumps (P-05A/B) (one active, one standby) at 22.5 kW / 3000 RPM. 7. Raw Naphtha Storage Unit Collects and condenses naphtha extracted during cooking. • 7-1-1: Raw Naphtha Tanks (V-07A/B/C): Three vertical Stainless Steel 304 tanks (1.5m dia, 5m H) connected to three heat exchangers and two pump pairs. Equipped internally with water spray nozzles on a ring pipe to wash non-condensable gases. • 7-1-2: Heat Exchangers (HE-01A/B/C): Condense naphtha vapors from 140°C down to 40°C using water from the cooling tower. Connected in series. Shell & Tube type, carbon steel (510 mm dia, 6m L) with 70 tubes (0.75-inch dia) in two rows of 35. Includes internal baffles for efficiency. • 7-1-3: Supporting Pumps: Vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM draw naphtha vapors from reactors to the heat exchangers, pushing non-condensable gases to the scrubber (V-14). Centrifugal pumps (P-02A/B) at 11.5 kW / 1500 RPM transport liquid raw naphtha to the Bleaching Unit. 8. Vacuum Distillation Unit The core of the plant, separating remaining light compounds and producing hard asphalt. • 8-1-1: Vacuum Distillation Tower: A vertical tower (~16m total height, 14mm carbon steel). Bottom section (Reboiler) is 3.5m dia x 1.2m H; top section is 1.5m dia x 12m H. Fully insulated. Fed with cooked material at 190-200°C via pumps (P-05A/B). To start extraction (remaining naphtha, Gas Oil, diesel), temperature is raised to 240-250°C using Heating Coil 1 via pumps (P-08A/B) at 55 kW / 3000 RPM, with continuous circulation via pumps (P-07A/B). Vacuum pumps (VP-03A/B) maintain 0.3-0.5 mbar pressure. Light compounds are extracted, condensed (HE-02A/B/C), and stored (V-08/09/10 A/B) over 2.5-3 hours. Afterward, material is heated via Heating Coil 2 to 320-340°C to finalize extraction and produce hard bitumen. Product is extracted via pumps (P-07A/B) at ~320°C, cooled via cooling tower coils, and sent to final tanks (V-18A/B/C). Batch processing takes 6-7 hours daily; continuous operation is possible. • 8-1-2: Supporting Pumps: Vacuum pumps (VP-03A/B) at 5.5 kW / 3000 RPM draw light vapors for condensation. Circulation centrifugal pumps (P-08A/B) at 55 kW move hot material to heating coils; (P-07A/B) circulate material and pump final bitumen product. • 8-1-3: Heating Coils 1 & 2: Carbon steel 4-inch diameter coils heated externally by a Gas Oil burner. Connected in series to heat liquid bitumen in two stages to prevent degradation. • 8-2: Heat Exchangers (HE-02A/B/C): Condense light compound vapors from 240°C to 40°C. Shell & Tube type, carbon steel (600 mm dia, 6m L) with 80 tubes (1-inch dia) in two rows of 40, equipped with baffles. • 8-3: Light Compound Tanks (V-08A/B, V-09A/B, V-10A/B): Six horizontal carbon steel tanks (1.5m dia, 4.5m L, 14mm thick). Receive condensates, linked to heat exchangers and vacuum pumps. Liquids are pumped to the Bleaching Unit via centrifugal pumps (P-06A/B) at 7.5 kW / 1500 RPM. 9. Bleaching Unit Improves the specifications of raw light compounds for local use and marketing. • 9-1: Collection Tank (V-11): Horizontal carbon steel tank (1m dia, 2.5m L, 14mm thick) placed above the system to store and distribute light compounds to the bleaching columns. • 9-2: Bleaching Columns (V-12A/B/C): Three vertical carbon steel vessels (1m dia, 4.5m H, 14mm thick). Contain a 15 cm catalyst layer on trays to bleach raw liquids into high-quality compounds, collected in a bottom horizontal tank. The catalyst is a calcined mixture of Bentonite and Zinc Oxide granules (2-3 mm) homogenized in water, which can be reactivated with steam and 5% HCl. • 9-3: Supporting Pumps: Vacuum pumps (VP-04A/B) at 5.5 kW extract vapors to the scrubber. Centrifugal pumps (P-09A/B) at 7.5 kW push bleached liquids to final tanks. 10. Production Tanks (V-13 A-F & V-18 A-C) • Light Products: Six horizontal carbon steel tanks (2.8m dia, 9m L, 55-ton capacity). V-13A/B for light naphtha, V-13C/D for Gas Oil, V-13E/F for diesel. • Asphalt: Three vertical carbon steel tanks (V-18A/B/C) (5m dia, 9m H). Equipped with thermal oil heating coils to keep asphalt liquid. Fully insulated (90 kg/m³ glass wool, 1.8mm aluminum cover). 11. Supporting Systems • 11-1: Gas Washing (Scrubber) System: Treats non-condensable gases before atmospheric release. Contains V-14 washing tank (1m dia, 2.8m L), a 500mm Flare stack with 3 ignitors, and a 1m x 1m LPG tank (V-15) for ignition. • 11-2: Cooling Tower: Provides cooling water for heat exchangers. Galvanized pressed steel basin (16m L x 2.4m W x 2.8m H), FRP casing, top fans, water distributors, and fill media. Includes Accumulator tank V-20 (1.5m dia, 2m L) and 11 kW pushing pumps (P-14A/B). • 11-3: Thermal Oil Boilers: Includes oil tank, heating boiler, oil pumps, and heating accelerators. • 11-4: Distillation Tower Raw Boilers • 11-5: Power Generation System • 11-6: Production Laboratory • 11-7: Control and Operation Room • 11-8: Catalyst System: Contains a vertical diesel tank (1m dia, 1.5m H) with a 1 kW centrifugal pump (P-11). Two vertical carbon steel tanks (V-17A/B, 1.5m dia, 4.5m H) with an MX-03 hydromotor mixer (7.5 kW, 30 RPM). V-17A is for preparation, V-17B pumps catalyst to the reactor. ________________________________________ Catalyst Chemical Components & Formulations 1. Alumina (Al2O3): Enhances the cracking of chemical bonds in heavy bitumen chains and increases Gas Oil extraction yield. 2. Manganese Dioxide (MnO2): Accelerates the reaction, reduces reaction time, and acts as a gasoline improver. 3. Silicon Dioxide (SiO2): Increases acceleration and reduces reaction time. 4. Iron Oxides (Fe2O): Accelerates the reaction, prevents pipe corrosion, and stops sulfur and wax from sticking to pipes and pumps. Weight Ratios (WT/WT) to Produce One Barrel (200 Liters) of Catalyst: 1. Alumina: Varies by feed: 2-2.5% for Bitumen / 4-5% for Vacuum Residue (VR) / 2-2.5% for Heavy Fuel Oil (HFO). To increase Gas Oil/Diesel (Light fuel) yield, Alumina can be added up to a maximum of 10%. 2. Manganese Dioxide: 2-2.5% for HFO / 4-5% for VR and Bitumen. 3. Iron Oxides: 2-2.5% across all feeds. 4. Silicon Dioxide: 2-2.5% for HFO / 4-5% for Bitumen and VR. 5. Remaining Volume: Filled with C-oil. Note: One barrel (200 Liters) of this mixture is added for every 5 tons of HFO, VR, or Bitumen. Manufacturing Mechanism: All components are placed in a tank, initially mixed with water, and heated to 80-120°C with continuous mixing (20-30 RPM). Once foam is generated, the product is allowed to cool to 80°C. The heating process up to 120°C is repeated 3 or 4 times until foaming ceases. Finally, the temperature is raised to 150°C, and the mixture is topped off to 200 liters using C-oil. To further improve light compound specifications, Zinc Oxide (300 grams) is mixed with 20 kg of Bentonite in C-oil. This is added alongside the catalyst at a ratio of 1/5 barrel of catalyst added to the reactor.
015
Hero
Specialized Bitumen Refining Plant Governorate: Anbar / Hit District Production Capacity: ( ) Tons/Day The city of Hit in the Anbar Governorate is considered one of the most famous areas in the world for its natural "bitumen springs," which have been used for thousands of years (dating back to the Babylonian and Assyrian eras). However, processing this bitumen for modern use requires technical steps to transform it from a raw material into a viable product for construction or industrial applications. Bitumen emerges from these springs as a highly viscous liquid mixed with sulfurous water, salts, and mud impurities. This "Natural Asphalt" differs from petroleum bitumen produced in refineries, and it can also appear in the form of rocky or spongy blocks mixed with mud. To obtain industrially usable products from this bitumen, specifically for: 1. Waterproofing (Felt/Membranes): Considered one of the best coating materials for building foundations to prevent moisture leakage due to its high resistance to hydrolysis. 2. Road Paving: Mixed with gravel and sand to produce asphalt concrete. It is characterized by exceptionally high cohesive strength compared to industrial bitumen. The natural bitumen from these springs must undergo several fundamental processing stages to become industrially viable: 1. Collection and Sedimentation: Bitumen is collected from the springs or quarry sites and left in designated basins to allow the sulfurous water to naturally separate (due to density differences). 2. Primary Heating: The raw bitumen is placed in large boilers to: a. Evaporate the remaining water. b. Reduce viscosity for easier handling. 3. Filtration and Purification: The heated bitumen is screened to remove solid impurities such as gravel, dirt, and suspended organic matter. 4. Secondary Heating and Cooking: The temperature of the bitumen is raised, improving agents are added, and it is prepared for the vacuum distillation process. 5. Vacuum Distillation: The distillation process is conducted under low pressure (vacuum pressure), which allows for: a. The separation of light oils and volatile substances at lower temperatures. b. The production of highly pure "Hard Asphalt," which is highly demanded in the construction industry. ________________________________________ Plant Components and Operational Stages The specialized bitumen plant for processing raw natural bitumen (in both liquid and solid states) consists of a range of specialized equipment designed according to the latest international standards. This equipment aligns with the technical and engineering requirements for bitumen products, complies with Iraqi standard specifications, and adheres to environmental considerations in the Anbar Governorate. 1. Extraction Stage The raw material (solid or liquid) is extracted from quarries designated by the Geological Survey Authority using specialized mechanical equipment. It is stored in stocks or special basins for solid materials, then transported to the refinery site using specialized transport vehicles of various capacities. 2. Storage Stage The raw materials are stored in designated yards to ensure a sufficient inventory for continuous, uninterrupted production for no less than 7 working days. 3. Raw Material Preparation and Primary Heating Stage Raw materials are fed into the plant via hydraulic lifts. This stage includes: • 3-1: Crushing and Digestion: Solid raw materials from the quarries are broken down and digested using a digester (SH-01) equipped with double blades driven by hydraulic motors (22.5 kW capacity). The digester is 5 meters long and 1.80 meters in diameter, made of carbon steel, with Stainless Steel 304 blades. It includes a Stainless Steel piston driven by a 7.5 kW electric motor. • 3-2: Primary Heating: This melts the bitumen and improves pumpability through pipes and pumps. • 3-3: Efficiency Enhancement: To increase melting efficiency, Gas Oil is added to the primary heating basin at a ratio of 1:5 per ton of solid raw material entering the basin (this ratio decreases when using liquid raw bitumen). o 3-2-1: Primary Melting Basin (TK-01): Raw material is heated in a concrete tank (25m L x 5m W x 3m H) with a maximum storage capacity of 300 tons. Heating pipes circulate thermal fluid (oil) at 125°C, with a retention time of 4-6 hours. The tank is internally lined with 6-8 mm carbon steel plates to protect the heating pipes from corrosion. It contains 8 Stainless Steel 304 mixers (MX-01 A/B/C/D/E/F) driven by 7.5 kW electric motors (50 RPM) and gearboxes (1:60 ratio) to mix the material, increase heating efficiency, reduce retention time, and circulate the melted bitumen to eliminate dissolved water, resulting in a homogeneous melt. Covered with a carbon steel roof with service hatches, it connects to an air duct (30x60 cm) linked to 2 air blowers (AB-01A/B) (one operating, one standby) at 22.5 kW / 1500 RPM. These extract water vapor and sulfur fumes, sending them to a scrubber before atmospheric release and water recycling. o 3-2-2: Primary Collection Tank (V-01): A carbon steel tank (12-14 mm thick) with a maximum capacity of 125 tons (10m L x 5m W x 3m H). It connects directly to the primary tank (TK-01) via channels and movable gates to receive only liquid raw material. It contains thermal oil pipes to maintain the liquid raw material at 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum outer cover. Impurities larger than 35 mm are removed and collected in a waste tank. o 3-2-3: Screw Conveyors (SC-01 A/B): Carbon steel screw conveyors with a double-jacketed outer cover filled with thermal oil to maintain the 140°C temperature. Driven by 22.5 kW electric motors (3000 RPM) with 1:40 gearboxes, they transport the liquid raw material to the preliminary filtration unit. 4. Purification Unit Removes suspended impurities from the liquid raw material in two stages: • 4-1: Preliminary Purification Tank (V-02): A carbon steel tank (12-14 mm thick, 125-ton capacity, 5m L x 10m W x 3m H). Receives liquid raw material from the primary collection tank. Contains thermal oil pipes to maintain 140°C. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Impurities larger than 15 mm are removed to a waste tank. Material is pumped to the final filtration stage via gear pumps (GP-01 A/B) (one operating, one standby) at 22.5 kW / 1000 RPM. • 4-2: Final Filtration Unit (FT-01): Removes remaining impurities by passing liquids through box filters arranged in 2 trains (8 per train). They feature a two-layer Stainless Steel filter mesh (specified microns) wrapped around square boxes. Liquid enters from the outside, and pure liquid is collected from the inside via a pipe network connected to a manifold. This is driven by two vacuum pumps (VP-01A/B) connected to the raw material tanks. 5. Raw Material Tanks (V-03 A-J) Ten carbon steel tanks (2.5m diameter, 9m length, 14 mm thickness, 45-ton max capacity) equipped with thermal oil heating coils. They receive, store, and prepare the purified raw material for the subsequent cooking reaction. Insulated with glass wool (90 kg/m³) and a 1.8 mm aluminum cover. Connected by a pipe/valve network, the material is pumped via two centrifugal pumps (P-01 A/B) at 22.5 kW / 3000 RPM to the reactor unit. The tanks connect to a pipe network driven by vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM, pushing heating gases and vapors to the gas washing tank (V-14). 6. Reactor (Cooking) Unit (V-04 A/B) Consists of three reactors (55 tons each) that prepare the raw material for vacuum distillation and extract light naphtha compounds. • 6-1: Cooking Process: o 6-1-1: Catalyst System: Consists of two tanks. One prepares the catalyst mixture (1.5m dia, 4m H, 8mm carbon steel) with a mixer (MX-03) driven by a hydromotor and 1:40 gearbox. The second stores Gas Oil added to the preparation unit (1.5m dia, 1m H, 5mm carbon steel) with a 0.5 HP centrifugal pump. o 6-1-2: Reaction Tanks (V-04/05/06A): Three carbon steel tanks (2.8m dia, 9m L, 14mm thick, 55-ton max). Each has 2 Stainless Steel mixers (MX-02 A/B/C/D/E/F) driven by a 7.5 kW motor (1500 RPM) with a 1:40 gearbox. Contains an internal heating system powered by a Gas Oil burner to raise the temperature to 180°C. Catalyst is injected via dosing pumps (DP-01A/B) to increase naphtha extraction efficiency. Material is circulated during cooking by two centrifugal pumps per reactor (P-04A/B/C/D/E/F) (one active, one standby) to reduce retention time to 3-4 hours. After cooking, material is moved to the attached tank (V-04/05/06B) for storage before distillation. Fully insulated. o 6-1-3: Cooked Material Tank (V-04/05/06B): Carbon steel tank (2.8m dia, 9m L, 14mm thick) with thermal oil pipes to maintain 190-200°C. Fully insulated. Material is pumped to the vacuum distillation tower via centrifugal pumps (P-05A/B) (one active, one standby) at 22.5 kW / 3000 RPM. 7. Raw Naphtha Storage Unit Collects and condenses naphtha extracted during cooking. • 7-1-1: Raw Naphtha Tanks (V-07A/B/C): Three vertical Stainless Steel 304 tanks (1.5m dia, 5m H) connected to three heat exchangers and two pump pairs. Equipped internally with water spray nozzles on a ring pipe to wash non-condensable gases. • 7-1-2: Heat Exchangers (HE-01A/B/C): Condense naphtha vapors from 140°C down to 40°C using water from the cooling tower. Connected in series. Shell & Tube type, carbon steel (510 mm dia, 6m L) with 70 tubes (0.75-inch dia) in two rows of 35. Includes internal baffles for efficiency. • 7-1-3: Supporting Pumps: Vacuum pumps (VP-01A/B) at 22.5 kW / 1500 RPM draw naphtha vapors from reactors to the heat exchangers, pushing non-condensable gases to the scrubber (V-14). Centrifugal pumps (P-02A/B) at 11.5 kW / 1500 RPM transport liquid raw naphtha to the Bleaching Unit. 8. Vacuum Distillation Unit The core of the plant, separating remaining light compounds and producing hard asphalt. • 8-1-1: Vacuum Distillation Tower: A vertical tower (~16m total height, 14mm carbon steel). Bottom section (Reboiler) is 3.5m dia x 1.2m H; top section is 1.5m dia x 12m H. Fully insulated. Fed with cooked material at 190-200°C via pumps (P-05A/B). To start extraction (remaining naphtha, Gas Oil, diesel), temperature is raised to 240-250°C using Heating Coil 1 via pumps (P-08A/B) at 55 kW / 3000 RPM, with continuous circulation via pumps (P-07A/B). Vacuum pumps (VP-03A/B) maintain 0.3-0.5 mbar pressure. Light compounds are extracted, condensed (HE-02A/B/C), and stored (V-08/09/10 A/B) over 2.5-3 hours. Afterward, material is heated via Heating Coil 2 to 320-340°C to finalize extraction and produce hard bitumen. Product is extracted via pumps (P-07A/B) at ~320°C, cooled via cooling tower coils, and sent to final tanks (V-18A/B/C). Batch processing takes 6-7 hours daily; continuous operation is possible. • 8-1-2: Supporting Pumps: Vacuum pumps (VP-03A/B) at 5.5 kW / 3000 RPM draw light vapors for condensation. Circulation centrifugal pumps (P-08A/B) at 55 kW move hot material to heating coils; (P-07A/B) circulate material and pump final bitumen product. • 8-1-3: Heating Coils 1 & 2: Carbon steel 4-inch diameter coils heated externally by a Gas Oil burner. Connected in series to heat liquid bitumen in two stages to prevent degradation. • 8-2: Heat Exchangers (HE-02A/B/C): Condense light compound vapors from 240°C to 40°C. Shell & Tube type, carbon steel (600 mm dia, 6m L) with 80 tubes (1-inch dia) in two rows of 40, equipped with baffles. • 8-3: Light Compound Tanks (V-08A/B, V-09A/B, V-10A/B): Six horizontal carbon steel tanks (1.5m dia, 4.5m L, 14mm thick). Receive condensates, linked to heat exchangers and vacuum pumps. Liquids are pumped to the Bleaching Unit via centrifugal pumps (P-06A/B) at 7.5 kW / 1500 RPM. 9. Bleaching Unit Improves the specifications of raw light compounds for local use and marketing. • 9-1: Collection Tank (V-11): Horizontal carbon steel tank (1m dia, 2.5m L, 14mm thick) placed above the system to store and distribute light compounds to the bleaching columns. • 9-2: Bleaching Columns (V-12A/B/C): Three vertical carbon steel vessels (1m dia, 4.5m H, 14mm thick). Contain a 15 cm catalyst layer on trays to bleach raw liquids into high-quality compounds, collected in a bottom horizontal tank. The catalyst is a calcined mixture of Bentonite and Zinc Oxide granules (2-3 mm) homogenized in water, which can be reactivated with steam and 5% HCl. • 9-3: Supporting Pumps: Vacuum pumps (VP-04A/B) at 5.5 kW extract vapors to the scrubber. Centrifugal pumps (P-09A/B) at 7.5 kW push bleached liquids to final tanks. 10. Production Tanks (V-13 A-F & V-18 A-C) • Light Products: Six horizontal carbon steel tanks (2.8m dia, 9m L, 55-ton capacity). V-13A/B for light naphtha, V-13C/D for Gas Oil, V-13E/F for diesel. • Asphalt: Three vertical carbon steel tanks (V-18A/B/C) (5m dia, 9m H). Equipped with thermal oil heating coils to keep asphalt liquid. Fully insulated (90 kg/m³ glass wool, 1.8mm aluminum cover). 11. Supporting Systems • 11-1: Gas Washing (Scrubber) System: Treats non-condensable gases before atmospheric release. Contains V-14 washing tank (1m dia, 2.8m L), a 500mm Flare stack with 3 ignitors, and a 1m x 1m LPG tank (V-15) for ignition. • 11-2: Cooling Tower: Provides cooling water for heat exchangers. Galvanized pressed steel basin (16m L x 2.4m W x 2.8m H), FRP casing, top fans, water distributors, and fill media. Includes Accumulator tank V-20 (1.5m dia, 2m L) and 11 kW pushing pumps (P-14A/B). • 11-3: Thermal Oil Boilers: Includes oil tank, heating boiler, oil pumps, and heating accelerators. • 11-4: Distillation Tower Raw Boilers • 11-5: Power Generation System • 11-6: Production Laboratory • 11-7: Control and Operation Room • 11-8: Catalyst System: Contains a vertical diesel tank (1m dia, 1.5m H) with a 1 kW centrifugal pump (P-11). Two vertical carbon steel tanks (V-17A/B, 1.5m dia, 4.5m H) with an MX-03 hydromotor mixer (7.5 kW, 30 RPM). V-17A is for preparation, V-17B pumps catalyst to the reactor. ________________________________________ Catalyst Chemical Components & Formulations 1. Alumina (Al2O3): Enhances the cracking of chemical bonds in heavy bitumen chains and increases Gas Oil extraction yield. 2. Manganese Dioxide (MnO2): Accelerates the reaction, reduces reaction time, and acts as a gasoline improver. 3. Silicon Dioxide (SiO2): Increases acceleration and reduces reaction time. 4. Iron Oxides (Fe2O): Accelerates the reaction, prevents pipe corrosion, and stops sulfur and wax from sticking to pipes and pumps. Weight Ratios (WT/WT) to Produce One Barrel (200 Liters) of Catalyst: 1. Alumina: Varies by feed: 2-2.5% for Bitumen / 4-5% for Vacuum Residue (VR) / 2-2.5% for Heavy Fuel Oil (HFO). To increase Gas Oil/Diesel (Light fuel) yield, Alumina can be added up to a maximum of 10%. 2. Manganese Dioxide: 2-2.5% for HFO / 4-5% for VR and Bitumen. 3. Iron Oxides: 2-2.5% across all feeds. 4. Silicon Dioxide: 2-2.5% for HFO / 4-5% for Bitumen and VR. 5. Remaining Volume: Filled with C-oil. Note: One barrel (200 Liters) of this mixture is added for every 5 tons of HFO, VR, or Bitumen. Manufacturing Mechanism: All components are placed in a tank, initially mixed with water, and heated to 80-120°C with continuous mixing (20-30 RPM). Once foam is generated, the product is allowed to cool to 80°C. The heating process up to 120°C is repeated 3 or 4 times until foaming ceases. Finally, the temperature is raised to 150°C, and the mixture is topped off to 200 liters using C-oil. To further improve light compound specifications, Zinc Oxide (300 grams) is mixed with 20 kg of Bentonite in C-oil. This is added alongside the catalyst at a ratio of 1/5 barrel of catalyst added to the reactor.
010
Hero
"Behold a marvel of design—an egg-shaped tent structure that emanates an ethereal glow, inviting you into its enchanting realm. Crafted from a lightweight aluminum framework, this innovative structure features flexible rods that bend and contour effortlessly. The framework forms a circular base and a smaller circle at the top, seamlessly connected by vertical rods that resemble the ribs of an egg. The entire ovoid structure is cloaked in a resilient fabric, specifically chosen for its suitability in tent and canopy construction. The fabric elegantly envelopes the entire surface of the egg-shaped tent, accentuating the seamless and organic form of the structure. Not a single curve or contour is left untouched, as the fabric adheres flawlessly to every edge and fold. The fabric embraces the tent with a gentle embrace, creating an alluring presence that emphasizes its resemblance to a magnificent hatching egg. Step through the grand entrance, and you will discover a world of tranquility and wonder. Inside, there is only emptiness, illuminated by a soft, ambient light that bathes the interior with a serene glow. The absence of physical objects accentuates the sense of spaciousness and invites a deep sense of introspection. The space becomes a sanctuary for personal reflection and connection with oneself. As you gaze upon this remarkable structure, it seamlessly integrates with the natural surroundings, becoming a harmonious element of the landscape. The fabric-covered egg-shaped tent stands as a testament to human ingenuity, offering a captivating and immersive experience. Its exterior showcases the gentle glow that emanates from within, captivating all who behold its beauty. The size of the tent, with its complete coverage and ovoid structure, is designed for a single occupant, providing an intimate and personal space for solace and reflection. The lightweight aluminum framework, meticulously designed, forms a circular base and a smaller circle at the top, with vertical rods extending from the upper ring to the lower one, connecting them to shape the rib-like structure of the egg. Step through the open entrance, and you will enter a sanctuary of serenity, where the only companions are the soft glow and the empty expanse. Allow the encompassing light and the tranquil haven to embrace you, as you embark on a journey of introspection and connection within the allure of this egg-shaped tent."
0117
DreamShaper
"Behold a marvel of design—an egg-shaped tent structure that emanates an ethereal glow, inviting you into its enchanting realm. Crafted from a lightweight aluminum framework, this innovative structure features flexible rods that bend and contour effortlessly. The framework forms a circular base and a smaller circle at the top, seamlessly connected by vertical rods that resemble the ribs of an egg. The entire ovoid structure is cloaked in a resilient fabric, specifically chosen for its suitability in tent and canopy construction. The fabric elegantly envelopes the entire surface of the egg-shaped tent, accentuating the seamless and organic form of the structure. Not a single curve or contour is left untouched, as the fabric adheres flawlessly to every edge and fold. The fabric embraces the tent with a gentle embrace, creating an alluring presence that emphasizes its resemblance to a magnificent hatching egg. Step through the grand entrance, and you will discover a world of tranquility and wonder. Inside, there is only emptiness, illuminated by a soft, ambient light that bathes the interior with a serene glow. The absence of physical objects accentuates the sense of spaciousness and invites a deep sense of introspection. The space becomes a sanctuary for personal reflection and connection with oneself. As you gaze upon this remarkable structure, it seamlessly integrates with the natural surroundings, becoming a harmonious element of the landscape. The fabric-covered egg-shaped tent stands as a testament to human ingenuity, offering a captivating and immersive experience. Its exterior showcases the gentle glow that emanates from within, captivating all who behold its beauty. The size of the tent, with its complete coverage and ovoid structure, is designed for a single occupant, providing an intimate and personal space for solace and reflection. The lightweight aluminum framework, meticulously designed, forms a circular base and a smaller circle at the top, with vertical rods extending from the upper ring to the lower one, connecting them to shape the rib-like structure of the egg. Step through the open entrance, and you will enter a sanctuary of serenity, where the only companions are the soft glow and the empty expanse. Allow the encompassing light and the tranquil haven to embrace you, as you embark on a journey of introspection and connection within the allure of this egg-shaped tent."
089
DreamShaper
generate this business card: Layout 1: Modern Minimalist Colors: Primarily Atlantic Blue and Aluminum Snow. Layout:Left Side: Professional headshot in a circular or square frame. Right Side:Company Name: "SAFETY COMPLIANCE PROS" in bold, sans-serif font. Personal Name in a slightly smaller, sans-serif font. Contact information icons aligned vertically:Email icon Phone icon Location icon Geometric Corner Shape: A subtle, minimalist geometric shape in Aluminum Snow, placed at the top right corner of the card.
044
FLUX
"Behold a marvel of design—an egg-shaped tent structure that emanates an ethereal glow, inviting you into its enchanting realm. Crafted from a lightweight aluminum framework, this innovative structure features flexible rods that bend and contour effortlessly. The framework forms a circular base and a smaller circle at the top, seamlessly connected by vertical rods that resemble the ribs of an egg. The entire ovoid structure is cloaked in a resilient fabric, specifically chosen for its suitability in tent and canopy construction. The fabric elegantly envelopes the entire surface of the egg-shaped tent, accentuating the seamless and organic form of the structure. Not a single curve or contour is left untouched, as the fabric adheres flawlessly to every edge and fold. The fabric embraces the tent with a gentle embrace, creating an alluring presence that emphasizes its resemblance to a magnificent hatching egg. Step through the grand entrance, and you will discover a world of tranquility and wonder. Inside, there is only emptiness, illuminated by a soft, ambient light that bathes the interior with a serene glow. The absence of physical objects accentuates the sense of spaciousness and invites a deep sense of introspection. The space becomes a sanctuary for personal reflection and connection with oneself. As you gaze upon this remarkable structure, it seamlessly integrates with the natural surroundings, becoming a harmonious element of the landscape. The fabric-covered egg-shaped tent stands as a testament to human ingenuity, offering a captivating and immersive experience. Its exterior showcases the gentle glow that emanates from within, captivating all who behold its beauty. The size of the tent, with its complete coverage and ovoid structure, is designed for a single occupant, providing an intimate and personal space for solace and reflection. The lightweight aluminum framework, meticulously designed, forms a circular base and a smaller circle at the top, with vertical rods extending from the upper ring to the lower one, connecting them to shape the rib-like structure of the egg. Step through the open entrance, and you will enter a sanctuary of serenity, where the only companions are the soft glow and the empty expanse. Allow the encompassing light and the tranquil haven to embrace you, as you embark on a journey of introspection and connection within the allure of this egg-shaped tent."
095
DreamShaper
generate this business card: Layout 1: Modern Minimalist Colors: Primarily Atlantic Blue and Aluminum Snow. Layout:Left Side: Professional headshot in a circular or square frame. Right Side:Company Name: "SAFETY COMPLIANCE PROS" in bold, sans-serif font. Personal Name in a slightly smaller, sans-serif font. Contact information icons aligned vertically:Email icon Phone icon Location icon Geometric Corner Shape: A subtle, minimalist geometric shape in Aluminum Snow, placed at the top right corner of the card.
057
FLUX